-
- Out of Stock
- Other Modules
1.2v 12v ZB2L3 18650 Li-ion Lithium Battery Capacity Tester + Resistance Lead-acid Battery Capacity Meter Discharge Tester
- 140.00 EGP
- This circuit in order to improve the voltage measurement accuracy, specially designed DC bias, when the terminal is what all don't pick will display a small voltage, does not affect the actual measurement, if you are short connected with the input terminal (absolute 0V) will display 0. To understand the principle can consult the superposition theorem in electrical engineering.
- Read more
-
-
- Other Modules
1.75mm Filament Detection Sensor Module
- 110.00 EGP
- 1.75mm Filament Detection Sensor Module
- Add to cart
-
- Out of Stock
- Other Modules
12V Battery Level LED Indicator
- 45.00 EGP
- XD-82B 12V Battery Level Indicator Module 4 Paragraph 4 onboard Battery Indicator LED Lights. Monitor the level of your 12v battery and know when it’s running low with this small LED battery level indicator.
- Read more
-
-
- Out of Stock
- Other Modules
12V Delay Timer Switch Adjustable
- 45.00 EGP
- This 12V Delay Timer Switch Adjustable 0-10sec is one kind of popular switch module. You can use it control any devices on or off. This is a DC12V controlled 1 channel timer relay module. It has a NE555 timer chip on the board. You can adjust delay time(0-10s) by rotating the potentiometer. When this relay get powered it will delay…
- Read more
-
-
- Out of Stock
- Other Modules
16 Channel Analog Multiplexer
- 38.50 EGP
- Multiplexer Module is a micro chip that requires 1 Analog Pin and 2 to 4 Digital Pins to allow the micro controller to monitor more Analog Pins for sensor readings. The requirement of 1 Analog Pin is actually the output pin shared among all the extension Analog Pins. The module only allow 1 Analog channel or sensor value to be connected to…
- Read more
-
-
- Other Modules
2 Channel 5V DC Relay Module Solid State Low Level trigger
- 185.00 EGP
- 5V solid state relay 240V 2A, output with resistive fuse 240V 2A
- Add to cart
-
- Modules
2 channel Relay Shield With XBee/BTBee interface
- 225.00 EGP
- The Relay shield is capable of controlling 2 relays. The max switching power could be 10A/250VAC or 10A/30VDC. It could be directly controlled by Arduino/Freaduino through digital IOs with external 9v supply. With buildin xbee/BTBee type socket, it can be wirelessly controlled via Xbee/BTBee(HC-06). Make it an ideal solution for home automation and robotics purpose.
- Add to cart
-
- Other Modules
3 Axis Digital Gyroscope Sensor Module GY-50 L3G4200
- 125.00 EGP
- The L3G4200D has a full scale of /-250 / /-500 / /-2000 dps and is capable of measuring rates with a user-selectable bandwidth.These work great in gaming and virtual reality input devices, GPS navigation systems and robotics.With the given Arduino library, you can easliy setup your project as you get this product.
- Add to cart
-
- Out of Stock
- Other Modules
3D Printer Mechanical End Stop Switch Module
- 35.00 EGP
- 3D Printer Mechanical End Stop Switch Module is a Mechanical End stop kit or 3D Printers or CNC machines.
- Read more
-
-
- Other Modules
3D Printer Optical End Stop Switch Module
- 35.00 EGP
- 3D Printer Optical End Stop Switch Module Key Features and Enhancements: High-Quality Cable: The module comes with a 22AWG cable line featuring thick copper wire. This high-quality cable ensures stable and reliable connections. Secure Connection: The cable line is designed to be securely attached, making it resistant to accidental disconnection during operation. This feature enhances the overall safety and reliability…
- Add to cart
-
- Modules, Other Modules
4 Channel 5V Relay Module Board Shield for Arduino
- 275.00 EGP
- 4 Channel 5V Relay Module Board Shield for Arduino This 5V 4 Relay Shield Module is a small current signal control power equipment commonly used electronic module Enabling high-power single-chip control devices are widely used in SCM system to make smart home project Can be directly plugged into the compatible the use of various types of motherboards, eliminating the patch…
- Add to cart
-
- Out of Stock
- Wireless
433MHZ TX/RXB6 MODULE
- 60.50 EGP
- 433MHZ TX/RXB6 MODULE
- Read more
-
-
- Wireless
5V 2A Wireless Charger Module
- 380.00 EGP
- 5V 2A Large Current Wireless Charger Module Wireless Power Supply Module Transmitter Receiver Charging Coil Module
- Add to cart
-
- Wireless
85.6kbps SIM800L GSM GPRS Module
- 300.00 EGP
- The SIM800L module supports quad-band GSM/GPRS network, available for GPRS and SMS message data remote transmission. The SIM800L communicates with microcontroller via UART port, supports command including 3GPP TS 27.007, 27.005 and SIMCOM enhanced AT Commands. It also has built-in level translation, so it can work with microcontroller of higher voltage than 2.8V default. Besides, the board also supports A-GPS…
- Add to cart
-
- Out of Stock
- Ethernet, Modules, Other Modules, Wireless
A9G Development Board Module (GPS GSM GPRS)
- 1,200.00 EGP
- ORIGINAL AI-THINKER A9G GSM/GPRS GPS/BDS DEVELOPMENT BOARD SMS VOICE WIRELESS DATA TRANSMISSION POSITIONING
- Read more
-
-
- Out of Stock
- Modules
AC 100-240V High Power Music Tesla Coil Plasma Speaker With Adapter
- 2,099.00 EGP
- Read more
-
-
- Out of Stock
- Modules, Wireless
Adapter Board for NRF24L01 Wireless Module (3.3V)
- 22.00 EGP
- Read more
-
-
- Out of Stock
- Other Modules
ADS1115 16-Bit ADC – 4 Channel with Programmable Gain Amplifier
- 95.00 EGP
- For microcontrollers without an analog-to-digital converter or when you want a higher-precision ADC, the ADS1115 provides 16-bit precision at 860 samples/second over I2C. The chip can be configured as 4 single-ended input channels, or two differential channels. As a nice bonus, it even includes a programmable gain amplifier, up to x16, to help boost up smaller single/differential signals to the…
- Read more
-
-
- Out of Stock
- Converters
AMS1117 5V to 3.3V DC-DC Step-Down Power Supply Buck Module 800mA
- 11.00 EGP
- 3.3V DC-DC Step-Down Power Supply To 5V Buck Module AMS1117 Automatic Automatic Adjustable Boost Board Start Limit Voltage
- Read more
-
-
- Out of Stock
- Modules Accessories
Antenna Male Dual Band
- 27.50 EGP
- Antenna Male Dual Band
- Read more
-
-
- Modules
Arduino Nano CNC Shield V4 Board
- 171.00 EGP
- 3D printer stepper motor driver needs to work with Nano Arduino board. It can be used as driver expansion board for engraving machines and 3D printers.
- Add to cart
-
- Modules
Arduino Nano Shield
- 140.00 EGP
- This shield is designed for Arduino Nano, you can make Arduino Nano's pins layout same as standard shield's easily.
- Add to cart
-
- Out of StockSale!
- Modules
Arduino Shield “Proto Shield With Mini Breadboard”
- Original price was: 88.00 EGP.50.00 EGPCurrent price is: 50.00 EGP.
- Arduino Shield The prototyping shield provides an easy way to build and design your own circuits. You can solder the parts in the prototyping area, resulting in a clean and neat circuit that you can easily mount and detach from the Arduino. Alternatively, if you don’t like to solder or don’t want to stick to such a permanent solution, you…
- Read more
-
-
- Out of StockSale!
- Modules
Arduino SIM900 GPRS/GSM Module with 4 Frequency Antenna
- Original price was: 950.00 EGP.850.00 EGPCurrent price is: 850.00 EGP.
- Arduino SIM900 GPRS/GSM Shield with 4 Frequency Antenna
- Read more
-
-
- Out of Stock
- Modules
Arduino Usb Host Shield 2.0 Adk Shield
- 215.00 EGP
- Arduino USB Host Shield is a board which gives USB interface features to Arduino board and possibility to stack USB devices to Arduino.
- Read more
-
-
- Out of Stock
- Audio
Audio Amplifier Module (LM386-Adjustable Gain)
- 40.00 EGP
- Audio Amplifier Module (LM386-Adjustable Gain)
- Read more
-
-
- Modules
AVR ISP 10Pin To ICSP 6Pin Converter V2
- 35.00 EGP
- AVR ISP 10Pin To ICSP 6Pin Converter V2 The standard 10PIN programmer can be used to interface to 6PIN Interface Converter. MCU development board can be used to download Interface Converter and also an Arduino development board can be used for the ISP interface converter.
- Add to cart
-
- Out of Stock
- Bluetooth
Bluetooth V4.0
- 210.00 EGP
- Bluetooth 4.0 Module HM-10 Transparent Serial Port Module with Logic Level Conver Sion/Anti.
- Read more
-
-
- Modules
BMP280 Barometric Pressure & Altitude Sensor I2C/SPI Module 3.3V
- 60.00 EGP
- Description This BMP280 is a cheapest and tiny Atmospheric Sensor Breakout to measure barometric pressure, and temperature readings all without taking up too much space. Basically, anything you need to know about atmospheric conditions you can find out from this tiny breakout. The BMP280 Breakout has been design to be used in indoor/outdoor navigation, weather forecasting, home automation, and even…
- Add to cart
-
- Modules, Other Modules
BMP280 Barometric Pressure and Altitude Sensor I2C/SPI Module
- 70.00 EGP
- DESCRIPTION Now we’ve got a high-precision environmental sensor at even lower cost, Barometer Sensor(BMP280). It is based on their new BMP280 sensor, which is an upgraded version of the old BMP180 Barometer Sensor (BMP180). The module provides precise measurement of barometric pressure and temperature in the environment. The air pressure can be measured in a range from 300 hPa to…
- Add to cart
-
- Converters, Modules
Boost Step-up Power Module High-voltage Generator DC 3V-6V to 1000KV
- 300.00 EGP
- Boost Step-up Power Module
- Add to cart
-
- Converters
Boost Step-up Power Module High-voltage Generator DC 3V-6V to 400KV
- 240.00 EGP
- DC 3V-6V to 400KV Boost Step-up Power Module Generator High-voltage Inverter High Voltage Transformer Boost Step-up Power Module High-voltage Generator
- Add to cart
-
- Out of Stock
- Wireless
CC1101 Wireless Module / 433M With Antenna
- 143.00 EGP
- CC1101 Wireless Module / 433M With Antenna
- Read more
-
-
- Out of Stock
- Other Modules
CH376S U Disk Read Write Module For USB Control Transfer
- 110.00 EGP
- CH376 is common a USB bus interface chip, with 8 bit data bus and reading, writing and chip select lines and interrupt output, can easily attached to the system bus of the single chip microcomputer /DSP/MCU/MPU controller.
- Read more
-
-
- Out of Stock
- Modules
CN3791 MPPT Solar Panel Regulator Module 6V/9V/12V
- 180.00 EGP
- CN3791 MPPT Solar Panel Regulator Controller 6V 9V 12V 1 Cell Lithium Battery Charge Solar Panel Charger Board Controller Module
- Read more
-
-
- Sale!
- Modules
Computer IC Chips WiFi Shield for Arduino Compatible With MICROCHIP MRF24WB0MA
- Original price was: 770.00 EGP.280.00 EGPCurrent price is: 280.00 EGP.
- Computer IC Chips WiFi Shield
- Add to cart
-
- Out of Stock
- Converters
CP2102 Chip USB to TTL (Serial) Converter
- 85.00 EGP
- CP2102 is silab developed USB to serial chip, small size, may not require any peripheral components to reach into a simple USB-UART scheme, communication speed up to 1Mbps.
- Read more
-
-
- Out of Stock
- Converters
CP2102 USB 2.0 to TTL UART Serial Converter Module With DTR Pin
- 100.00 EGP
- Read more
-
-
- DC Motor Driver, DC Motors, Modules, PCBs
DC Motor Speed Controller High Power Module (PWM 48V 20A)
- 280.00 EGP
- This is a simple and easy-to-use DC motor speed controller of small size, elegant appearance and stable performance. It is made with high quality circuit board which ensures a longer service life.
- Add to cart
-
- Out of Stock
- Converters
DC To DC Converter Input 48V Output 12V 20A
- 660.00 EGP
- DC To DC Converter Input 48V Output 12V 20A
- Read more
-
-
- Out of Stock
- Converters
DC-DC Adjustable Step-Down Power Supply Module -XL4005 5A 75W DSN5000
- 48.00 EGP
- XL4005 is a 300KHz fixed frequency PWM buck (step-down) DC/DC converter, capable of driving a 5A load with high efficiency, low ripple and excellent line and load regulation. Requiring a minimum number of external components, the regulator is simple to use and include internal frequency compensation and a fixed-frequency oscillator.
- Read more
-
-
- Out of Stock
- Converters
DC-DC Adjustable Voltage Buck Converter 5A with LED Display
- 110.00 EGP
- DC-DC Adjustable Voltage Buck Converter 5A with LED Display
- Read more
-
-
- Converters, Modules
DC-DC Auto Buck Boost Converter 2.5V-15V To 5V
- 65.00 EGP
- DC-DC Automatic Buck Boost Converter 2.5V-15V To 3.3V 5V Fixed Output Power Module
- Add to cart
-
- Out of Stock
- Converters
DC-DC Boost Converter Voltage Step Up Module 150W 6A
- 195.00 EGP
- It is a very suitable Voltage Booster/Regulator for projects that require high power. The board can boost 10V-32V input voltage to regulated 12V-35V adjustable output voltage. The input current of the board is up to 6A and output current is up to 10A. The board has 100W output power without cooler. With proper cooling the output power can be as…
- Read more
-
-
- Converters
DC-DC Step Down Converter 8A
- 170.00 EGP
- Max 8A 200W DC-DC Step Down Buck Converter Power Supply XL4016 PWM Adjustable 4-40V To 1.25-36V Step-Down Board Module Voltage regulator potentiometer counter-clockwise rotation voltage decreases, if the rotation of the copper column voltage has not changed, you can rotate 5-10 laps.
- Add to cart
-
- Out of Stock
- Converters
DC-DC Step Up Down Boost Buck Voltage Converter Module LM2577S LM2596S
- 137.50 EGP
- If you have a battery that needs a stable voltage output, then this module fits your requirements best. This module keeps your desired voltage even with the lower or higher input voltage. You would need at least 4V up to 35V input voltage for this module to work. The output is controllable using a potentiometer from 1.25V to 25V. It…
- Read more
-
-
- Out of Stock
- Converters
DC-DC Step Up Down Buck-Boost Voltage Converter Module LM2577 LM2596
- 110.00 EGP
- DC-DC Step Up Down Buck-Boost Voltage Converter Module LM2577 LM2596
- Read more
-
-
- Converters
DC-DC Step-Down Mini 360 Buck Converter
- 50.00 EGP
- Super compact and capable, this DC-DC buck converter can knock down a voltage from 23V to as low as 1V with up to 95% efficiency.
- Add to cart
-
- Sale!
- Converters
DC-DC USB Boost Step-up Converter 0.9V-5V to 5V
- Original price was: 60.00 EGP.45.00 EGPCurrent price is: 45.00 EGP.
- DC-DC USB Boost Step-up Converter 0.9V-5V to 5V
- Add to cart
-
- Audio
DFPlayer Mini MP3 Player Module For Arduino
- 150.00 EGP
- DFPlayer Mini is a compact and inexpensive MP3 module can be directly connected to the speaker.
- Add to cart
-
- Out of Stock
- Clock & Timer Module
DS1307 RTC Module 24C32 Memory
- 45.00 EGP
- DS1307 RTC Module 24C32 Memory
- Read more
-
-
- Out of Stock
- Converters
Easycap Hq
- 137.50 EGP
- Easycap Hq USB 2.0 Video Capture Adapter Send Video to your PC through USB port Record Video in DVD/VCD/MP3/4 format and save in hard drive Play Video Game (PS2/3, Xbox 360, Wii....) on PC/Laptop Watch Video on Desktop/Laptop Monitor Screen With Professional and easy to use video editor software: Ulead Video Studio 10.0 SE DVD
- Read more
-
-
- Modules
ECG-EMG Arduino Shield (Bio-feedback Sensor)
- 1,850.00 EGP
- This is ECG/EMG shield which allow Arduino like boards to capture both Electrocardiography and Electromiography signals. The shield opens new possibilities to experiment with bio feedback. When used as ECG (Electrocardiograph) you can monitor your heartbeat activity and regularity over period of time as detected by electrodes attached to skin. When used as EMG (electromyograph ) you can monitor and evaluate…
- Add to cart
-
- Out of Stock
- Ethernet
ENC28J60 Ethernet Network Module
- 121.00 EGP
- ENC28J60 Ethernet Network Module
- Read more
-
-
- Out of Stock
- Ethernet
ENC28J60 Ethernet Network Module Mini Board
- 121.00 EGP
- ENC28J60 Ethernet LAN Network Module for Arduino 51 AVR LPC
- Read more
-
-
- Out of Stock
- Wireless
ESP-07 ESP8266 UART Serial To Wifi Module For Arduino, Raspberry Pi
- 66.00 EGP
- ESP8266 ESP-07 Serial Wi-Fi Wireless Module is a new player in this field. It’s tiny (25mm x 15mm), with simple pin connections, using serial TX/RX to send and receive Ethernet buffers, and similarly, using serial commands to query and change configurations of the Wi-Fi module. This is quite convenient as it only requires two wires (TX/RX) to communicate between a…
- Read more
-
-
- Out of Stock
- Developments Boards, Wireless
ESP32 Development Board (WIFI and Bluetooth) with Ch340 USB Type-C
- 430.00 EGP
- The ESP32 Dev Board CH340 - USB-C is an exceptional development board meticulously designed to cater to a wide array of IoT (Internet of Things) applications. Powered by the robust ESP32 microcontroller, it offers a versatile range of connectivity options, making it suitable for a multitude of IoT projects. This board boasts a USB-C interface coupled with a reliable CH340…
- Read more
-
-
- Wireless
ESP8266 5V Wifi Relay Module 1 Channel
- 250.00 EGP
- 5V WiFi relay module carried an ESP8266 WiFi module and microcontroller.It will send the serial port instructions to the cell phone APP and Implementation within the local area network (LAN) for wireless control relay.
- Add to cart
-
- Wireless
ESP8266 5V WIFI Relay Module 2 Channel
- 350.00 EGP
- The 5V dual WiFi relay module uses ESP-01 as the WiFi module and is compatible with 8 bit MCU chip. Only a simple configuration process can realize the wireless control of the 2 way relay by using the mobile phone APP .
- Add to cart
-
- Out of Stock
- Modules, Wireless
ESP8266 ESP-01 with USB adapter WiFi module
- 175.00 EGP
- This module is a USB programmer for ESP8266 modules of type ESP-01.
- Read more
-
-
- Out of Stock
- Wireless
ESP8266 ESP-04 Wifi Transceiver Wireless Module
- 66.00 EGP
- ESP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor.
- Read more
-
-
- Out of Stock
- Wireless
ESP8266 ESP-12F Wifi Transceiver Wireless Module
- 170.00 EGP
- The Latest ESP-12F ESP8266 Wi-Fi Module AP & Station Remote Serial Wireless IoT Board is an integrated chip designed for the needs of a new connected world. It can handle all the necessary overhead for communicating with your network, such as TCP/IP stack and communicating with your 802.11 networks. It is completely addressable over SPI and UART protocols allowing you…
- Read more
-
-
- Out of Stock
- Wireless
ESP8266 WiFi 4 channel Relay Module
- 450.00 EGP
- DC 12V ESP8266 4 channel relay board ESP-01 WIFI module 4 channel WIFI relay module for smart home smart furniture
- Read more
-
-
- Out of Stock
- Wireless
ESP8266 Wifi Transceiver Module ESP03
- 66.00 EGP
- ESP8266 Small transceiver module Wi-Fi-based chip, compatible with standard 802.11 b / g / n 2.4 GHz, has SPI interface, 7 GPIO, TCP / IP stack and antenna ceramic PCB. Ideal for wireless sensor networks, home automation, building automation, and custom applications. Power: 3.3 Vdc, dimensions (mm): 17.4 x 12.2.
- Read more
-
-
- Out of Stock
- Converters, Modules, PCBs
EXCLUSIVE Mini560 step down DC-DC converter
- Mini560 step down DC-DC converter is high Efficiency Step Down DC -DC Buck Converter Synchronous Rectifier Voltage Regulator Power Supply Board Mini560 5V.
- Read more
-
-
- Other Modules
FMP10 Fingerprint Recognition Module
- 1,250.00 EGP
- FMP10 Fingerprint Recognition Module
- Add to cart
-
- Wireless
FST/CZS 433Mhz Wireless Transmitter Module
- 45.00 EGP
- Wireless Transmitter Module This is 433Mhz RF transmitter with receiver kit for Arduino ARM MCU wireless, It's Uses Remote control switch, receiver module, motorcycles, automobile anti-theft products, home security products, electric doors, shutter doors, windows, remote control socket, remote control LED, remote audio remote control electric doors, garage door remote control, remote control retractable doors, remote volume gate, pan doors,…
- Add to cart
-
- Out of Stock
- Converters
FT232Rl FTDI
- 105.00 EGP
- FT232Rl FTDI
- Read more
-
-
- Converters
FTDI Module – USB to TTL (Switchable 3.3 or 5V) FT232RL
- 150.00 EGP
- The FTDI USB to TTL serial converter module is a UART (universal asynchronous receiver-transmitter) board used for TTL serial communication. It is a breakout board for the FTDI FT232R chip with a USB interface, can use 3.3 or 5 V DC and has Tx/Rx and other breakout points.
- Add to cart
-
- Out of Stock
- Modules Accessories
GPS Antenna
- 154.00 EGP
- GPS Antenna
- Read more
-
-
- Modules Accessories
GSM Antenna IPX to SMA Connector for SIM900A SIM900 SIM800L GPRS
- 85.00 EGP
- Universal GSM extension antenna for SIM900A SIM900 SIM800L GPRS/GPRS development board Come along with IPX to female SMA cable easy to connect
- Add to cart
-
- Other Modules
GY-271 HMC5883L Compass
- 100.00 EGP
- GY-271 HMC5883L 3-Axis Magnetic Electronic Compass Module is designed for low-field magnetic sensing with a digital interface and it is perfect to give precise heading information. This compact sensor fits into small projects such as UAVs and robot navigation systems. The sensor converts any magnetic field to a differential voltage output on 3 axes. This voltage shift is the raw digital…
- Add to cart
-
- Other Modules
GY-273 3-Axis Compass Magnetometer Sensor Module
- 250.00 EGP
- GY-273 DC 3V-5V HMC5883L Triple Axis Compass Magnetometer Sensor Module Three Axis Magnetic Field Module for Arduino
- Add to cart
-
- Out of Stock
- Other Modules
GY-291 ADXL345 3-Axis Accelerometer
- 60.50 EGP
- GY-291 ADXL345 3-Axis is a small and efficient sensor with a high resolution (13-bit) that can measure an acceleration of up to ± 16g. The module can be accessed via the I2C or SPI protocol and can be supplied with a voltage between 3V and 5V.
- Read more
-
-
- Other Modules
GY-45 MMA845 3-Axis Accelerometer Module
- 100.00 EGP
- The MMA8452 is a smart low-power, three-axis accelerometer with 12 bits of resolution. This accelerometer is packed with embedded functions with flexible user programmable options, configurable to two interrupt pins. The MMA8452 has user selectable full scales of ±2g/±4g/±8g. The device can be configured to generate inertial wake-up interrupt signals allowing the MMA8452 to monitor events and remain in a…
- Add to cart
-
- Other Modules
GY-521 MPU6050 Triple 3-Axis Accelerometer Gyroscope I2C
- 155.00 EGP
- The MPU6050 contains both a 3-Axis Gyroscope and a 3-Axis accelerometer allowing measurements of both independently, but all based around the same axes, thus eliminating the problems of cross-axis errors when using separate devices.
- Add to cart
-
- Out of Stock
- Other Modules
GY-61 DXL335 3-Axis Accelerometer Module
- 180.00 EGP
- GY-61 ADXL335 Module is a small, thin, low-power, complete 3-axis accelerometer with signal conditioned voltage outputs. The ADXL335 Module 3-axis Analog Output Accelerometer measures acceleration with a minimum full-scale range of ±3 g. It can measure the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion, shock, or vibration. This breakout board comes with…
- Read more
-
-
- Out of Stock
- Other Modules
GY-65 BMP085 Atmospheric Pressure Altimeter Module
- 72.00 EGP
- GY-65 BMP085 is a high precision, ultra-low power consumption pressure sensors, can be applied to mobile devices. Its performance, the absolute accuracy of the minimum can reach 0.03hPa, and very low power consumption, only 3A. BMP085 powerful 8-pin ceramic-lead chip carrier (LCC) ultra-thin package, through the I2C bus can be connected directly with a variety of microprocessor.
- Read more
-
-
- Out of Stock
- Other Modules
GY-88 IMU 10DOF MPU6050 + HMC5883L + BMP085
- 220.00 EGP
- This IMU 10DOF is a motion tracking module. Its design is based on the sensor MPU6050,HMC5883L and BMP085. The sensor MPU6050 which is the world’s first integrated 6-axis Motion Tracking device, that combines a 3-axis gyroscope, 3-axis accelerometer, and a Digital Motion Processor (DMP). The Honeywell’s HMC5883L which is a 3-axis digital compass. The BMP085 is a high-accuracy chip to…
- Read more
-
-
- Bluetooth
HC-05 Bluetooth Module
- 235.00 EGP
- Very simple Bluetooth module to connect it with your microcontroller, Arduino, Raspberry Pi, or any MCU board using the TTL UART interface This serial bluetooth module can work as either master or slave. This module also includes the base board, not only the core board, most functions are pre-set, so only the serial port communication is available but it’s more easy to…
- Add to cart
-
- Out of Stock
- Modules, Wireless
HC-12 Wirless Transceiver Module (1KM)
- 250.00 EGP
- Transceiver Module HC-12 Wireless Transceiver Module (SI4438, 433MHz, 1km)
- Read more
-
-
- Out of Stock
- Converters
Hi Link AC-DC Module 220Vac to 12Vdc “HLK-PM12”
- 88.00 EGP
- HLK-PM12 is a ultra-compact power module. It is designed to meet the requirements of EMC and Safety Test. It can use in IOT project, Smart home and so on.
- Read more
-
-
- Out of Stock
- Converters
Hi Link AC-DC Module 220Vac to 3.3Vdc “HLK-PM03”
- 88.00 EGP
- Hi Link AC-DC Module 220Vac to 3.3Vdc "HLK-PM03" AC-DC 220V To 3.3Visolating Switch Power Supply Module/ Step-Down Module Output Overload And Short Circuit Protection Low Power Consumption, Environmental Protection, No-Load Loss <0.1W The Product Is Designed to Meet the Requirements of EMC And Safety Test It can use in IOT project, Smart home and so on.
- Read more
-
-
- Out of Stock
- Converters
Hi Link AC-DC Module 220Vac to 5Vdc “HLK-PM01”
- 88.00 EGP
- HLK-PM01 is a ultra-compact power module. It is designed to meet the requirements of EMC and Safety Test. It can use in IOT project, Smart home and so on.
- Read more
-
-
- Other Modules
High-power MOSFET Trigger Switch Drive Module
- 40.00 EGP
- High-power MOSFET Trigger Switch Drive Module
- Add to cart
-
- Converters, Modules
HW-183 Board DC-DC Step Up Power Module 2A B6287
- 55.00 EGP
- HW-183 Board DC-DC Step Up Power Module 2A B6287 The whole network's smallest adjustable boost module can be easily installed in a variety of small equipment. The module supports Micro USB input, a USB charger or mobile power supply can easily get to it 9V, 12V, 15V, 18V, 24V, easy to use.
- Add to cart
-
- Converters
HX711 Weighing Scale Analog to Digital Converter 24 bit
- 55.00 EGP
- The Load Cell Amplifier and ADC (Analog-to-Digital Converter) Module is a small breakout board for the HX711 IC that allows you to easily read load cells to measure weight. By connecting the module to your microcontroller you will be able to read the changes in the resistance of the load cell and with some calibration you’ll be able to get very accurate weight…
- Add to cart
-
- Other Modules
I2C Arduino Serial Module For LCD 16*2
- 55.00 EGP
- This is I2C Arduino Serial Module For LCD board that can be connected to a standard HD44780 compatible 16×2 , 20×4 or 20×2 Character Display Module that supports 4 bit mode.This board has a PCF8574 I2C chip that converts I2C serial data to parallell data for the LCD display.
- Add to cart
-
- Modules
Infrared Flame Sensor Module – 4 pin
- 35.00 EGP
- Description The Flame Sensor Module can detect flames in the 760 – 1100 nanometer wavelength range. Small flames like a lighter flame can be detected at roughly 0.8m. The detection angle is roughly 60 degrees and the sensor is particularly sensitive to the flame spectrum. An on-board LM393 op-amp is used as a comparator to adjust the sensitivity level. The sensor has…
- Add to cart
-
- Out of Stock
- Wireless
Infrared Remote Control and Receiver
- 50.00 EGP
- IR Infrared Remote Control Module Wireless Receiver Module DIY Kit for Arduino for Raspberry Pi
- Read more
-
-
- Out of Stock
- Converters, Modules
Inverter Module DC 12V to AC 110V 175V 220V – 150W
- 170.00 EGP
- 150W converter DC 12V TO AC 220V inverter boost module step up board
- Read more
-
-
- Out of Stock
- Other Modules
IRF520 MOSFET Driver Module
- 27.50 EGP
- IRF520 MOSFET Driver Module
- Read more
-
-
- Out of Stock
- Audio
ISD1820 Recording And Playback Module 10 Seconds
- 83.00 EGP
- This ISD1820 Voice Recorder/Playback Module reproduces high-quality, natural voice and audio from the recorded audio by Mic or driven through Microcontroller. Because of its dual operation mode (Standalone and Microcontroller driven), we can easily use this as per requirement and with a slight change of the onboard resistor, we can get flexibility in the sampling frequency of the recording duration…
- Read more
-
-
- Other Modules
Joystick Module X-Y For Arduino
- 40.00 EGP
- Lots of robotic projects need a joystick. This module offers an affordable solution to that. The Joystick module is similar to analog joysticks found in gamepads. It is made by mounting two potentiometers at a 90 degrees angle. The potentiometers are connected to a short stick centered by springs.
- Add to cart
-
- Out of Stock
- Modules
Joystick Shield V1 For Arduino
- 110.00 EGP
- The Joystick Shield V1.A is an Uno compatible shield that allows you to turn an Arduino Uno or compatible into a game console or robotic controller.The joystick Shield V1.A will let you turn your Arduino board into a controller like the game console system. It can be used to control anything from a remote control car to anything that you…
- Read more
-
-
- Out of Stock
- Other Modules
Kingston Canvas Select Plus 32GB Micro SD Card
- 121.00 EGP
- Read more
-
-
- Modules, Other Modules
LASER Receiver Module
- 40.00 EGP
- The laser receiver sensor module uses a non-modulated laser receiver to detect the laser signal.
- Add to cart
-
- Batteries & Accessories, Modules, Other Modules
LCD Dual USB 5V 1A 2.1A Mobile Power Bank Module
- 185.00 EGP
- LCD Dual USB 5V Power Bank Charger Module with LCD & Dual USB interface 5V 1A 2.1A With Automatic Protection
- Add to cart
-
- Other Modules
Led Matrix 8×8 With MAX7219 Module
- 140.00 EGP
- The MAX7219 Dot Led Matrix Module is a serial input common-cathode driver that interfaces micro-controllers to LED matrices
- Add to cart
-
- Out of Stock
- Other Modules
Lipo Battery Voltage Tester / Low Voltage Buzzer Alarm
- 55.00 EGP
- LIPO Battery Voltage Tester and low voltage buzzer alarm combo is easy to use. Li-Po Battery Voltage Buzzer Indicator: directly plug it into your operating battery, it will monitor the conditions of your battery all the time, so your batteries shall remain within safe operating voltage range at all times.
- Read more
-
-
- Out of Stock
- Modules
Lithium Battery Charger Module IP2312 3A with USB Type-C
- 65.00 EGP
- Read more
-
-
- Out of Stock
- Lithium Batteries, Modules
Lithium Battery Charger Protection Module (BMS) 5S 100A 21V
- 350.00 EGP
- Read more
-
-
- Out of Stock
- Batteries & Accessories, Chargers, Lithium Batteries, Modules, Other Modules
Lithium Battery Charger Protection Module (BMS) 5S 15A 21V
- 100.00 EGP
- 5S 15A Li-ion Lithium Battery 18650 Charger PCB BMS 18.5V 21V Cell Protection Board Integrated Circuits
- Read more
-
-
- Out of Stock
- Converters
LM2577 2.5A DC-DC Step UP LED Voltmeter 3-34 to 4-35V Adjustable Boost Converter module
- 77.00 EGP
- The LM2577 2.5A DC-DC Step UP LED Voltmeter 3-34 to 4-35V Adjustable Boost Converter module is a 150 KHz fixed frequency PWM buck (step-down) DC/DC module. Requiring a minimum number of external components, these regulators are cost-effective, and simple to use.
- Read more
-
-
- Out of Stock
- Converters
LM2577 DC – DC Converter Step-Up 2.5A
- 80.00 EGP
- LM2577 DC - DC Converter Step-Up 2.5A
- Read more
-
-
- Out of Stock
- Converters
LM2596 Buck Step Down Module DC-DC 4.0-40V to 1.25-37V
- 75.00 EGP
- LM2596 DC 4V-40V To 1V-37V Adjustable Step-Down Power Converter LED Voltmeter with Voltage Meter Display High Quality
- Read more
-
-
- Converters
LM2596S DC-DC Step-Down Adjustable Converter 3A
- 65.00 EGP
- LM2596S DC-DC 4.5-40V adjustable Step-Down Power Supply Module
- Add to cart
-
- Out of Stock
- Converters
Logic Level Converter Bi-Directional
- 45.00 EGP
- I2C Logic Level Converter Bi-Directional Module 5V to 3.3V
- Read more
-
-
- Camera, Modules
Luxonis OAK-D Lite Camera “A00483”
- 24,000.00 EGP
- Combines high performance and economy, providing all the superpowers offered by RVC2 core and DepthAI API in an affordable package. Won AI and Vision Alliance's Best camera award in 2022. 4 TOPS of processing power 13 MP central RGB camera available in auto-focus and fixed-focus variants BMI270 IMU, 6-axis sensor combining accelerometer and gyroscope USB2 / USB3 for power delivery and communication OAK-D…
- Add to cart
-
- Sale!
- Modules
Makey Makey Touch Key Usb Shield
- Original price was: 370.00 EGP.200.00 EGPCurrent price is: 200.00 EGP.
- Makey Makey Touch Key Usb Shield
- Add to cart
-
- Converters
MAX485 TTL To RS485 Converter Module
- 60.00 EGP
- 5V MAX485 TTL To RS485 Converter Module Board For Arduino
- Add to cart
-
- Out of Stock
- Other Modules
MAX6675 Module for Thermocouple K Type
- 110.00 EGP
- Read more
-
-
- Other Modules
MAX6675 Module for Thermocouple K Type
- 240.00 EGP
- This K Type Thermocouple can be used to measure temperatures up to 600 degree Celsius! Great for industrial projects, 3D Printers, DIY and hobby projects which require a high temperature to be measured.
- Add to cart
-
- Other Modules
MCP2515 CAN Bus Module Board TJA1050 Receiver SPI For 51 MCU
- 230.00 EGP
- The MCP2515 Module adopts CAN controller MCP2515, and TJA1050 high-speed CAN transceiver. Microchip MCP2515 independent CAN protocol controller, support CAN V2.0B regulation. The connection between MCP2515 and MCU is through SPI.
- Add to cart
-
- Out of Stock
- Converters
MCP4725 I2C DAC Breakout Board
- 50.00 EGP
- The MCP4725 is a single-channel 12-bit buffered voltage output DAC with non-volatile memory (EEPROM) that allows you to store configuration register bits (2 bits) and DAC input data (12 bits) to non-volatile EEPROM (14-bit) In memory.
- Read more
-
-
- Sale!
- Other Modules
MCR12 Barcode Reader / Scanner Module
- Original price was: 1,500.00 EGP.950.00 EGPCurrent price is: 950.00 EGP.
- Decode nearly any kind of 1D (striped) barcode in your project using this adorable compact barcode scanner. We've looked all over for a small, light, low-power module that can be easily integrated. This OEM scanner has a little camera inside that takes 100 photos per second, instead of using a 'scanning mirror' assembly. This means its less likely to get…
- Add to cart
-
- Out of Stock
- Bluetooth
Metal USB Bluetooth Receiver Dongle
- 33.00 EGP
- Metal USB Bluetooth Audio Receiver Music Adapter Speakers Compact and Convenient Audio Receiver Get the continuous music playback on the go with the USB Bluetooth Audio Receiver. With this device you can transform your speakers or headsets to Bluetooth wireless speakers seamlessly. It comes with a single button that adds convenience while operating the device. You can operate the device…
- Read more
-
-
- Other Modules
Micro SD Card Module
- 40.00 EGP
- Micro SD card mini TF card reader module SPI interfaces with level converter chip
- Add to cart
-
- Other Modules
Micro-USB Female Breakout Module
- 15.00 EGP
- A Female MicroUSB port with breakout board so you can solder on wires or header pins and integrate into any project.
- Add to cart
-
- Modules, Other Modules
Mini 5V Traffic Light LED Display Module for Arduino Red Yellow Green 5mm LED
- 40.00 EGP
- Mini 5V Traffic Light LED Display Module for Arduino Red Yellow Green 5mm LED RGB -Traffic Light for Traffic Light System Model
- Add to cart
-
- Converters, Modules
Mini DC-DC Boost Step Up Converter 3.7V to 5V / 8V/ 9V / 12V
- 60.00 EGP
- Mini DC-DC Boost Step Up Converter with an output voltage greater than the source voltage. The output current is lower than the source current. This is a high voltage step-up power supply module, which is commonly used in electronics experiments and demonstrations. The high-voltage module uses the principle of the Tesla coil. The voltage boost converter module provides 3.7V DC…
- Add to cart
-
- Converters, Modules
Mini MP1584EN DC-DC Buck Adjustable Step Down Module 4.5V-28V Input 0.8V-20V Output
- 50.00 EGP
- The Mini MP1584 DC-DC 3A Adjustable Buck module is ultra small adjustable 0.8V to 20V output DC to DC Buck converter uses an MP1584EN high frequency switching regulator and integrated high voltage power MOSFET.
- Add to cart
-
- Environment Sensors, Modules
MQ-5 GAS sensor module
- 90.00 EGP
- MQ-5 GAS sensor module Sensitive material of MQ-5 gas sensor module is SnO2, which with lower conductivity in clean air. When the target combustible gas exist, The sensors conductivity is more higher along with the gas concentration rising. Please use simple electrocircuit, convert change of conductivity to correspond output signal of gas concentration. MQ-5 gas sensor module has high sensitity…
- Add to cart
-
- Converters
MT3608 2A DC-DC Step Up Boost Converter Module
- 40.00 EGP
- The MT3608 Mini Adjustable DC-DC Boost Module is a low cost module that can step-up a 2.5 to 24V input voltage up to a 5 to 28V output at up to 1.5A.
- Add to cart
-
- Other Modules
NE555 Adjustable Frequency Pulse Generator Module
- 20.00 EGP
- This is a square wave pulse generator module based on the ubiquitous NE555 timer IC. The module can be powered from a wide power supply range (5 to 12V) and will produce a continuous square wave output between 4Hz to 1.3KHz which can be set by on on-board multi-turn potentiometer. Module has ten-turn frequency adjustment control and power on LED.…
- Add to cart
-
- Wireless
NRF24L01 + 2.4G Wireless
- 95.00 EGP
- NRF24L01 2.4G Wireless
- Add to cart
-
- Out of Stock
- Wireless
NRF24L01 + 2.4G Wireless with 3.3V Voltage Regulator Breakout Adapter
- NRF24L01 2.4G Wireless with 3.3V Voltage Regulator Breakout Adapter
- Read more
-
-
- Out of Stock
- Wireless
Nrf24L01+Pa+Lna 1KM Distance Wireless Transceiver (2DB Antenna)
- 193.00 EGP
- This 2.4GHZ NRF24L01 Module with PA LNA SMA Antenna use 2.4 GHz transceiver from Nordic Semiconductor, the nRF24L01 PA LNA. This transceiver IC operates in the 2.4 GHz band and has many new features. Take all the coolness of the nRF2401A and add some extra pipelines, buffers, and an auto-re-transmit feature.
- Read more
-
-
- Wireless
NRF905 Wireless Transmission Module with Antenna
- 250.00 EGP
- NRF905 Wireless Transmission Module with Antenna
- Add to cart
-
- Out of Stock
- Converters
OTG Type-C to USB 2.0 Converter
- 25.00 EGP
- Read more
-
-
- Out of Stock
- Audio
PAM8403 Audio Amplifier With Volume Control
- 38.50 EGP
- PAM8403 2 Channel USB Power Audio Amplifier Module Board 3Wx2 Volume Control
- Read more
-
-
- Out of Stock
- Audio
PAM8403 Stereo Audio Amplifier Module
- 25.00 EGP
- PAM8403 is an Amplifier Board which can be powered using simple 5V input and could drive two 3W 3W stereo speakers. It is an excellent choice, who wants a Class-D stereo audio amplifier in small board space. This Amplifier allows the user to achieve high-quality audio reproduction from a stereo input. Additionally, it has a special feature that is, it can drive speakers directly from…
- Read more
-
-
- Out of Stock
- Audio
PAM8610 Digital Audio Amplifier Board 2x15W Dual Channel Stereo 7-15 V
- 130.00 EGP
- Dual-Channel Stereo Output, Run-on 7V to 15V power Supply, 32 Steps DC volume control has a 32dB to -75dB range, 40 pin QFN 6 x 6 mm package, Much higher efficiency in terms of cost and performance than competitors’ ICs.
- Read more
-
-
- Other Modules
Photosenstive Diode Module
- 27.50 EGP
- Photosenstive diode module is the most sensitive for environmental light intensity, generally used for detecting the ambient brightness and intensity. In most of the cases with photosenstive resistance sensor module universal, it is difference that is the photosensitive diode module directional well and can sense the fixed direction of light source
- Add to cart
-
- Out of Stock
- Modules Accessories
Plastic Rfid Tag
- 5.50 EGP
- RFID Tag (13.56MHz) is widely used in electronic locks or customer identification as well as other systems where a small and easy to carry tag is desired.The tag can be read by almost any 13.56MHz RFID/NFC reader that can handle Mifare cards.
- Read more
-
-
- Out of Stock
- Wireless
Ralink RT3070 USB Wifi Module 150M
- 350.00 EGP
- Ralink RT3070 USB Wifi Module 150M
- Read more
-
-
- Other Modules
Reed Switch Module
- 35.00 EGP
- Reed switch is a kind of passive electronic switching component with contacts with a simple structure, small size and easy to control. It consists of a sealed glass envelope where there are two ferrous elastic reeds and is filled with inert gas called rhodium
- Add to cart
-
- Out of Stock
- Other Modules
Relay 1 channel 30A 240VAC
- 55.00 EGP
- 30A relay module, normally open interface with maximum load: AC 240V/30A, DC 30V/30A
- Read more
-
-
- Other Modules
Relay Module 1 Channel 5V
- 40.00 EGP
- The Single Channel Relay Module is a convenient board that can be used to control high voltage, high current loads such as motor, solenoid valves, lamps, and AC load. It is designed to interface with microcontrollers such as Arduino, PIC and etc. The relays terminal (COM, NO, and NC) is being brought out with a screw terminal. It also comes…
- Add to cart
-
- Out of Stock
- Other Modules
Relay Module 16 Channel 5V
- 231.00 EGP
- Relay Module 16 Channel 5V
- Read more
-
-
- Components, Other Modules, Relays
Relay Module 2 Channel 12V (high/low) level trigger
- 75.00 EGP
- This is a HIGH/LOW Level 12V 2-channel relay interface board, and each channel needs a 20mA driver current. It can be used to control various appliances and equipment with large current. It is equipped with high-current relays that work under AC 250V 10A or DC 30V 10A. It has a standard interface that can be controlled directly by microcontroller
- Add to cart
-
- Other Modules
Relay Module 2 Channel 5V (high/low) level trigger
- 80.00 EGP
- Relay Module 2 Channel 5V is a LOW Level 5V 2-channel relay interface board, and each channel needs a 20mA driver current. It can be used to control various appliances and equipment with large current. It is equipped with high-current relays that work under AC 250 V -10 A or DC 30 V 10 A. It has a standard interface that…
- Add to cart
-
- Other Modules
Relay Module 4 Channel – 5V DC
- 140.00 EGP
- Relay Module 5Vdc – 4 Relay For Arduino & MCU H/L Trigger
- Add to cart
-
- Out of Stock
- Other Modules
Relay Module 8 Channel 5V
- 195.00 EGP
- This is a 5V 8-Channels Relay module, It can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM and MSP430. 8 relays are included in this module, with “NC” ports means “Normally connected to COM” and “NO” ports means “Normally open to COM”. This module also equipped with 8 LEDS to show the status…
- Read more
-
-
- Out of Stock
- Wireless
RF4432Se Si4432 433Mhz Wireless Rf Transceiver Module
- 132.00 EGP
- This LoRa (Long Range) Module uses the Silicon Labs' Si4432 wireless transceiver chip. It is a complete, compact, low-power wireless transceiver module. Silicon Labs' EZRadioPRO Series SI44322009 works in the range of 433MHZ band, and the maximum output power up to 20 DBm which can reach a range of kilometers. The module integrates all RF related functions and devices and offers reliable…
- Read more
-
-
- Wireless
RFID 125Khz
- 175.00 EGP
- 125Khz RFID module is the most popular RFID module. By connecting this RFID module to Arduino or Raspberry Pi, you are able to build projects that can be used in office/home security, personal identification, access control, anti-forgery, interactive toy and production control systems, etc.
- Add to cart
-
- Wireless
RFID 125Khz without Tag
- 155.00 EGP
- RDM 125KHz card mini-module is designed for reading code from 125KHz card compatible read-only tags and read/write card . It can be applied in office/home security, personal identification, access control, anti-forgery, interactive toy and production control systems etc.
- Add to cart
-
- Wireless
RFID 13.56 Mhz Card Reader “MFRC522 RFID Reader/Writer”
- 100.00 EGP
- RFID 13.56 Mhz Card Reader "MFRC522 RFID Reader/Writer" This is a 13.56MHz RFID read and write module. It can be used for almost all kinds of 13.56MHz passive ID cards and tags. It is ISO14443A compatible The module is easy to use and It can be used with Arduino and microcontroller through SPI moe.
- Add to cart
-
- Out of Stock
- Modules Accessories
RFID Card 13.56MHz
- 16.50 EGP
- RFID Card 13.56MHz
- Read more
-
-
- Out of Stock
- Modules, Other Modules
Rgb Led Module
- 10.00 EGP
- RGB LED is a light emitting diode that displays just about any color by manipulating the intensities of either the Red, the Green or the Blue LED.
- Read more
-
-
- Sale!
- Wireless
RN-XV Wifly Bee RN-171 XV Wire Antenna
- Original price was: 375.00 EGP.275.00 EGPCurrent price is: 275.00 EGP.
- RN-XV Wifly Bee RN-171 XV Wire Antenna
- Add to cart
-
- Out of Stock
- Converters
RS232 to TTL Converter (Max232)
- 40.00 EGP
- The RS232 To TTL Converter Module is widely used in radio modifications, cell phone Flash, XBOX360 Flash detection, GPS, car, DVD Flash, HDD repair, set-top box upgrade.
- Read more
-
-
- Out of Stock
- Clock & Timer Module
RTC DS3231 I2C High Precision Real Time Clock Module For Arduino
- 120.00 EGP
- RTC DS3231 I2C High Precision Real Time Clock Module For Arduino
- Read more
-
-
- Out of Stock
- Other Modules
SD Card Module, SPI Interface
- 55.00 EGP
- This is a wonderful little Arduino to SD card interface module.Through programming, you can read and write to the SD card using your arduino.If you are feeling adventurous, this is truly an interesting board to work with and learn from.It is easily interfaced as a peripheral to your arduino sensor shield module.
- Read more
-
-
- Out of Stock
- Other Modules
SILICON POWER USB Flash Ultima U03, 32GB, USB 2.0
- 110.00 EGP
- Elegant and stylish USB drive with luxurious diamond cut pattern and 32GB storage capacity
- Read more
-
-
- Out of Stock
- Modules
Sim 808 Gprs / GSM / GPS / Bluetooth All In One Shield For Arduino
- 935.00 EGP
- Credit card size, this shield has integrated quad-band GSM/GPRS and GPS navigation technology.
- Read more
-
-
- Out of Stock
- Wireless
Sim 900 A-Mini Board
- 385.00 EGP
- Sim 900 A Mini Module is a breakout board that has feature of complete dual band GSM/GPRS module which is specially designed for small market areas for cost effective solutions. It has Quad-Band of 850/ 900/ 1800/ 1900 MHz and Dual-Band of 900/1900 MHZ. It has useful performance for voice, SMS, Data and Fax in a small form factor.
- Read more
-
-
- Wireless
SIM800L V2.0 5V Wireless Quad Band GSM GPRS Module PCB Antenna
- 400.00 EGP
- Wireless Quad Band GSM GPRS Module This module power supply for 5 v, computer debug USB to TTL serial port. Power supply can output current of 800 mA, TTL serial interface is compatible with 3.3 V and 5 V single chip microcomputer.
- Add to cart
-
- Out of Stock
- Wireless
SIM800L V2.2 GPRS GSM Module with MicroSIM Card Port and PCB Anttena
- 660.00 EGP
- SIM800L V2.2 GPRS GSM Module with MicroSIM Card Port and PCB Anttena
- Read more
-
-
- Out of Stock
- Modules
Sim900 GSM / Gprs Shield For Arduino Icomsat 1.1
- 825.00 EGP
- SIM900 GSM/GPRS shield is a GSM modem, which can be integrated into a great number of IoT projects. You can use this shield to accomplish almost anything a normal cell phone can; SMS text messages, Make or receive phone calls, connecting to internet through GPRS, TCP/IP, and more! To top it off, the shield supports quad-band GSM/GPRS network, meaning it…
- Read more
-
-
- Out of Stock
- Wireless
SIM900-TE-C GSM GPRS Module
- 495.00 EGP
- SIM900-TE-C GSM GPRS Module
- Read more
-
-
- Other Modules
Single Channel 5V DC Relay Module Solid State Low Level Trigger
- 70.00 EGP
- Single Channel 5V DC Relay Module Solid-State Low-Level Trigger, output with resistive fuse (240V 2A) It is a 1-channel solid state relay board, which can be controlled by a wide range of microcontrollers such as AVR, PIC, ARM, PLC, etc. With blue KF301terminal, more convenient for control line Standard interface can be connected with microcontrollers Solid State Relay Module Product…
- Add to cart
-
- Out of Stock
- Modules Accessories
Sma Male Straight Antenna 5cm 433MHz
- 27.50 EGP
- Sma Male Straight Antenna 5cm 433MHz
- Read more
-
-
- Modules
Solar Panel 18V 5W
- 325.00 EGP
- Add to cart
-
- Converters
Sunfounder AD/DA Converter PCF8591
- 450.00 EGP
- The PCF8591 is a single-chip, single-supply and low-power 8-bit CMOS data acquisition device with four analog inputs, one analog output and a serial I2C-bus interface. Three address pins A0, A1 and A2 are used for programming the hardware address, allowing maximum of eight devices connected to the I2C-bus without additional hardware. Address, control and data to and from the device…
- Add to cart
-
- Audio
TDA7388 Power Amplifiers Four Channel 4x41W Audio DC 12V BTL PC Car AMP PCB
- 225.00 EGP
- TDA7388 Power Amplifiers
- Add to cart
-
- Out of Stock
- Audio
TDA8932 Digital Amplifier Board Mono 35W Low Power Stereo Amplifier Module
- 99.00 EGP
- The board uses a high-performance digital TDA8932 chip, high efficiency, high power, high-quality sound, without additional installation of heat sink, very suitable for the transformation of active speakers, electro-acoustic project implementation, product development and other audio applications.
- Read more
-
-
- Audio
TF/U Disk MP3 Format Decoder Board Amplifier Module
- 195.00 EGP
- TF/U Disk MP3 Format Decoder Board Amplifier Module
- Add to cart
-
- Out of Stock
- Modules, Other Modules, Switches
Tilt Switch Module KY020
- 35.00 EGP
- Module
- Read more
-
-
- Clock & Timer Module, Modules
Timer Module Trigger Delay Relay Module 5-30V with Micro USB
- 60.00 EGP
- 5V-30V Delay Relay Timer Module Trigger Delay Switch Micro USB Power Adjustable Relay Module
- Add to cart
-
- Wireless
Uart Wifi Module With Ceramic Antenna Hlk-Rm04
- 300.00 EGP
- Uart Wifi Module With Ceramic Antenna Hlk-Rm04
- Add to cart
-
- Other Modules
Ublox NEO-6m GPS tested Module v2
- 600.00 EGP
- Ublox makes good gps. The Ublox NEO-6M gps engine on this board is a quite good one, with high precision binary output. It has also high sensitivity for indoor applications. The gps module have a battery for power backup and EEprom for storing configuration settings. The antenna is connected to module through ufl cable which allow for flexibility in mounting…
- Add to cart
-
- Out of Stock
- Ethernet, Modules, Wireless
Ublox NEO-6mV2 GPS Module
- 500.00 EGP
- Read more
-
-
- Out of StockSale!
- Converters
USB DC-DC Converter Step Down Module 5V 3A
- Original price was: 34.00 EGP.30.00 EGPCurrent price is: 30.00 EGP.
- The input voltage of this converter module 6V to 24V, output voltage 4.8-5.2V and 3A peak current output . This module uses low ESR filter capacitor voltage as low as possible so that the ripple 30mV, fully capable and linear power comparable. The USB output converter module has short circuit protection, 5A current automatic protection.
- Read more
-
-
- Out of Stock
- Converters
USB DC-DC Converter Step Up Boost Module (0.9V-5V to 5V 600mA)
- 22.00 EGP
- Read more
-
-
- Converters
USB to TTL converter UART module CH340
- 65.00 EGP
- USB to TTL converter UART module CH340G CH340 3.3V 5V switch
- Add to cart
-
- Converters
USB To TTL Pl2303
- 65.00 EGP
- USB To TTL Pl2303
- Add to cart
-
- Modules
USB to UART/ESP8266 Adapter Programmer for ESP-01 WIFI Modules with CH340G Chip
- 40.00 EGP
- USB to UART/ESP8266 Adapter Programmer for ESP-01 WIFI Modules with CH340G Chip Driver Chip: CH340G Supports all basic windows versions. The adapter plate integrated 1000μF solid capacitors to ensure the current supply The power supply will not be a problem to make WIFI module crashes unresponsive. Using 3225 SMD crystal oscillator, improve the stability of serial work, on a beautiful and…
- Add to cart
-
- Modules, Wireless
Wemos NodeMCU V3 ESP8266 340G WIFI Module With Extra Memory 32M Flash
- 285.00 EGP
- Wemos NodeMCU V3 ESP8266 340G WIFI Module With Extra Memory 32M Flash module is based on widely explored esp8266 System on Chip from Expressif.
- Add to cart
-
- Wireless
WiFi ESP8266 Serial TTL Module ESP-01S
- 140.00 EGP
- WiFi ESP8266 Serial TTL Module ESP-01S
- Add to cart
-
- Out of Stock
- Wireless
WiFi Serial TTL Module “ESP8266-12E”
- 88.00 EGP
- Read more
-
-
- Sale!
- Wireless
WiFi To TTL-UART
- Original price was: 220.00 EGP.200.00 EGPCurrent price is: 200.00 EGP.
- WiFi To TTL-UART
- Add to cart
-
- Wireless
Wireless Power Charger Module
- 275.00 EGP
- Wireless Power Charger Module
- Add to cart
-
- Wireless
Wireless Rf Transceiver Modules HR-1022
- 440.00 EGP
- Wireless Rf Transceiver Modules HR-1022 Wireless RF Transceiver Module with the low-power wireless transceiver data module is used as the wireless data transceiver in long range
- Add to cart
-
- Audio
WTV020-020 Audio Playback SD Module
- 77.00 EGP
- Embedding audio playback in your electronics project has never been easier. This module plays audio files from the SD card and you can control the playback using a simple serial interface.
- Add to cart
-
- Out of Stock
- Wireless
Xbee 2Mw 120M
- 330.00 EGP
- xbee XB24-Z7WIT-004 module from Digi. Series 2 improves on the power output and data protocol. Series 2 modules allow you to create complex mesh networks based on the Xbee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.…
- Read more
-
-
- Out of StockSale!
- Wireless
Xbee 5V/3.3V Adapter Board
- Original price was: 220.00 EGP.190.00 EGPCurrent price is: 190.00 EGP.
- This low cost XBee 3.3-5V Adapter Board comes in partially assembled kit form and provides a cost-effective solution for interfacing your microcontroller to any XBee or XBee Pro module (see Associated Modules below). A voltage regulator and 74LVC244A buffer is included onboard for safe interfacing to a 5 V supply, allowing for easy compatibility with any Parallax microcontroller.
- Read more
-
-
- Sale!
- Wireless
Xbee Adapter With Mini Port And USB Cable
- Original price was: 110.00 EGP.90.00 EGPCurrent price is: 90.00 EGP.
- Xbee Adapter With Mini Port And USB Cable
- Add to cart
-
- Out of Stock
- Converters
XL4015 5A DC Buck Step Down Voltage Converter
- 90.00 EGP
- This module combines the high efficiency XMLSEMI XL4015 DC-DC buck converter IC with a TI LM358 Op-Amp for stable current regulation. This module offers much higher efficiency than LM2596 based modules which means less heat and more available power for your device.
- Read more
-
-
- Out of Stock
- Converters
XL4016 DC-DC Buck Converter 8A Step Down 4-36V to 1.25-36V
- 150.00 EGP
- XL4016 PWM ADJUSTABLE 4-36V TO 1.25-36V STEP DOWN MODULE MAX 8A 200W DC-DC BUCK CONVERTER
- Read more
-
-
- Modules, Programmers
XTW100 Programmer USB Motherboard Multifunctional BIOS SPI FLASH 2425 Read / Write Burner
- 350.00 EGP
- Specifications: Dimensions: 50 x 30 x 15mm Weight: 20g USB interface: USB 1.1/2.0 Supported chip types: 24CXX, 25CXX, 93CXX, and EEPROM, FLASH, BIOS, and SPI FLASH chips Supported operating systems: Windows 2000/XP/VISTA/Win7/Win8/Win10
- Add to cart
-
- Out of Stock
- Other Modules
XY-LJ02 Timer Relay Delay Switch Module With LCD
- 137.50 EGP
- XY-LJ02 Timer Relay Delay Switch Module Delay Power Off and Trigger Delay Cycle Timing Circuit Switch with LCD Digital Display Compatible with Arduino
- Read more
-
