Inverter Module DC 12V to AC 110V 175V 220V – 150W
Roll over image to zoom in
170.00 EGP
150W converter DC 12V TO AC 220V inverter boost module step up board
Email when stock available
Inverter Module DC 12V to AC 110V 175V 220V – 150W
- is a device that convert DC current (usually from battery or solar cell) to AC current or city current (usually 220V).
- This inverter module receives 12V DC input and invert it to alternative current or city current (AC) at 220, 200, 172,110, 90, 62, 45, 28v ac level.
Features:
- Power: 150W
- Input voltage: DC12V
- Output voltage: AC 0-110V-172V-200V-220V
- Quiescent current: about 0.05A
- Output waveform: high frequency square wave
- Output frequency: about 20KHZ
- Protection: None
Warnings:
- The board belongs to high frequency square AC output; it is not suitable for the inductive appliance, such as motor, fan and coil transformer.
- While picked up with low-load machines (LED light, mobile phone charger and DVD set-top box), you are suggested to pick up with low voltage point, such as: 172V/110V.
- You should install a large heat sink to release its long time high-load (¡Y100W) work.
- You could not connect the power inversely. Besides, power supply and power wire should have large enough current.
- Do not overload and short-circuit because it without any protections.
- The number in measured by the output high frequency non-load voltage meter will be a little higher.
Output wiring the following voltages:
- V0–V2=110V
- V0–V3=175V
- V0–V4=200V
- V0–V5=220V
- V5–V4=20V
- V5–V3=45V
- V5–V2=110V
- V4–V3=28V
- V4–V2=90V
- V3–V2=62V
Package includes:
- 1 x 150W Converter DC 12V to AC 220V Inverter
Inverter Module DC 12V to AC 110V 175V 220V – 150W
More Detailed Photos:
Additional information
| Weight | 0.07 kg |
|---|---|
| Dimensions | 5 × 5 × 4 cm |
