-
Relay Module 2 Channel 12V (high/low) level trigger
This is a HIGH/LOW Level 12V 2-channel relay interface board, and each channel needs a 20mA driver current. It can be used to control various appliances and equipment with large current. It is equipped with high-current relays that work under AC 250V 10A or DC 30V 10A. It has a standard interface that can be controlled directly by microcontroller
75.00 EGP -
5V 2A Wireless Charger Module
5V 2A Large Current Wireless Charger Module Wireless Power Supply Module Transmitter Receiver Charging Coil Module
375.00 EGP5V 2A Wireless Charger Module
375.00 EGP -
Lithium Battery Charging Protection Module MH-CD42 2.1A 5V
MH-CD42 DC 5V 2.1A Mobile Power Diy Board 4.2V Charge/Discharge(boost)/battery protection/indicator module 3.7V lithium 18650
65.00 EGP -
Led Matrix 8×8 With MAX7219 Module
The MAX7219 Dot Led Matrix Module is a serial input common-cathode driver that interfaces micro-controllers to LED matrices
50.00 EGPLed Matrix 8×8 With MAX7219 Module
50.00 EGP -
3D Printer Mechanical End Stop Switch Module
3D Printer Mechanical End Stop Switch Module is a Mechanical End stop kit or 3D Printers or CNC machines.
35.00 EGP -
4 Channel 5V Relay Module Board Shield for Arduino
4 Channel 5V Relay Module Board Shield for Arduino
- This 5V 4 Relay Shield Module is a small current signal control power equipment commonly used electronic module
- Enabling high-power single-chip control devices are widely used in SCM system to make smart home project
- Can be directly plugged into the compatible the use of various types of motherboards, eliminating the patch cable troubles.
- This relay module is 5V active low.
- It is a 4-channel relay interface board, which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, PLC, etc.
- It is also able to control various appliances and other equipment with large current. Standard interface can be directly connected with microcontrollers.
- Red working status indicator lights are conducive to the safe use.
- Widely used for all MCU control, industrial sector, PLC control, and smart home control.
- Working voltage: 5V
- Channel: 4 channel
- Color: Blue
- Item size: approx. 7.1 x 5 x 1.3cm
- Net weight: 41.3g
275.00 EGP -
-
A9G Development Board Module (GPS GSM GPRS)
ORIGINAL AI-THINKER A9G GSM/GPRS+GPS/BDS DEVELOPMENT BOARD SMS VOICE WIRELESS DATA TRANSMISSION + POSITIONING
1,200.00 EGPA9G Development Board Module (GPS GSM GPRS)
1,200.00 EGP -
BMP280 Barometric Pressure and Altitude Sensor I2C/SPI Module
Now we’ve got a high-precision environmental sensor at even lower cost, Barometer Sensor(BMP280). It is based on their new BMP280 sensor, which is an upgraded version of the old BMP180 Barometer Sensor (BMP180). The module provides precise measurement of barometric pressure and temperature in the environment. The air pressure can be measured in a range from 300 hPa to 1100hPa with ±1.0 hPa absolute accuracy. As for the temperature the sensor works perfectly for temperatures between – 40 and 85 with an accuracy of ±1.Owing to its high accuracy on measuring the pressure, and the pressure changes with altitude, we can calculate the altitude with ±1 meter accuracy, which makes it a precise altimeter as well. Another great thing about this module is that, you don’t even need to worry about the I2C collisions as it provides both I2C and SPI interfaces. To use SPI, simply de-solder the bonding pads on the back. If you go with I2C, the board also provides 2 I2C addresses for you to select as you want.Note: As the sensor is quite sensitive to the environmental conditions, please DO NOT touch it with your fingers.Features
- High accuracy, absolute accuracy of ±1.0 hPa for pressure measurement and ±1 accuracy for temperature measurement
- Supports both I2C and SPI communication
- Can be used as an altimeter with accuracy of ±1 meter
Specification
- Supply Voltage: 5V
- Current Consumption: 0.6 mA
- Barometric Pressure Measure
- Range: 300 – 1100 hPa
- Accuracy: ±1.0 hPa
- Temperature Measurement
- Range: -40 to 85
- Accuracy: ±1
- Interface: I2C and SPI
Dimensions: 12mm x 10mm x 2mm
70.00 EGP
Shop By Department
- Audio and Sound
- Batteries & Accessories
- Cables/Wires
- Classic Control Components
- Components
- Developments Boards
- Integrated Circuits
- Light Source and Display
- Mechanical Parts
- Measuring Devices
- Modules
- Motors
- Power Sources
- Programmers
- Robotics
- Sensors
- Switches
- Tools
- Terminals & Connectors
- Inverters
- Camera
- Mobile Accessories
- Motor Drivers
- LCD
- Other Shields
- 9V Batteries
- AA Batteries
- AAA Batteries
- A27 Size Batteries
- Lithium Batteries
