No products in the cart.
-
1.8 TFT SPI 128*160 (Color LCD)
1.8 inch SPI TFT LCD Display Module for ST7735 128×160 51/AVR/STM32/ARM 8/16 bit
195.00 EGP1.8 TFT SPI 128*160 (Color LCD)
195.00 EGP -
-
High Bright LED Light
High Bright LED Light Lamp Chip Bead DC 30 – 36V – COLD WHITE LIGHT 30W, Very low heat generating, saving energy, environmentally.
50.00 EGPHigh Bright LED Light
50.00 EGP -
Display LCD 12864 3D Printer Controller Adapter For RAMPS 1.4
The 3D printer 128×64 Smart LCD controller for Ramps 1.4 contains a rotary encoder and a 128×64 LCD display.
330.00 EGP -
HW-069 4 Digits 7 Segment Display Module with 0.36Inch Time Clock TM1637 Driver
The module is a 12-pin display module with a 4-point common digital tube (0.36 inch) with a clock point.The driver chip is TM1637.
It only needs 2 signal lines to enable the MCU to control the 4-bit 8-segment digital tube
33.00 EGP -
LCD 4*20 and Controller for 3D Printer
LCD 4*20 and Controller The intelligent controller includes an SD card reader, rotary encoders, and a 20-character x 4 line LCD display. You can easily connect it to your RAMPS 1.4 board using the “smart adapter” included
248.00 EGPLCD 4*20 and Controller for 3D Printer
248.00 EGP -
-
1000 LEDs White/White High Brightness 5mm
1000 LEDs White/White High Brightness 5mm
550.00 EGP1000 LEDs White/White High Brightness 5mm
550.00 EGP -
-
12V 1.5W SMD 3030 Waterproof Led Module Blue
12V 1.5W SMD 3030 Waterproof Led Module Blue
8.50 EGP -
12V 1.5W SMD 3030 Waterproof Led Module Red
12V 1.5W SMD 3030 Waterproof Led Module Red
8.50 EGP
