Skip to content
-
You cannot add "Air Quality and Dust Sensor GP2Y10" to the cart because the product is out of stock.
-
-
-
- Environment Sensors
-
30.00 EGP
- A versatile light-sensitive module that detects ambient light intensity using an LDR (Light Dependent Resistor), perfect for automatic lighting systems, weather stations, and smart home applications.
- Add to cart
-
-
- Sensors
-
120.00 EGP
- 🚨 The 5 Channel Flame Sensor Module is a high-sensitivity, multi-directional fire detection solution capable of identifying flames or light sources in the 760 nm to 1100 nm wavelength range 🌈.Equipped with five independent flame detection units 📡, it ensures wide-area coverage and fast response ⚡ — making it perfect for safety-critical systems 🛡️ and robotics applications 🤖.
- Add to cart
-
-
-
-
- Touch Sensors
-
50.00 EGP
- The A38 Touch Switch Sensor Module is a compact, reliable, and easy-to-use capacitive touch switch. It’s designed for use in touch-sensitive applications where traditional mechanical buttons are either not practical or desired. The module detects the presence of a finger or conductive object on its touchpad and provides a digital output signal, making it ideal for embedded systems, home automation,…
- Add to cart
-
-
Out of Stock
- Voltage Sensors
-
100.00 EGP
- ZMPT101B a voltage transform ideal to measure the AC voltage. It has high accuracy, good consistency for voltage and power measurement up to 250V AC. Easy to use and comes with a multi turn trim potentiometer for adjusting the ADC output.
- Read more
-
-
- Current Sensors, Sensors
-
100.00 EGP
- The ACS712-5A Current Sensor Module is a high-precision, Hall-effect-based sensor designed to measure both AC and DC currents up to ±5 Amps. Based on the ACS712ELC-05B chip from Allegro MicroSystems, this module provides an analog voltage output that is proportional to the current flowing through the onboard conductor. It is widely used in projects requiring current monitoring, such as power…
- Add to cart
-
-
Sale!
- Sensors
-
3,650.00 EGP Original price was: 3,650.00 EGP.3,350.00 EGPCurrent price is: 3,350.00 EGP.
- Adafruit BNO055 9-DOF IMU with built-in Bosch fusion processor for accurate motion, orientation, and navigation sensing. Plug-and-play via I2C for Arduino, Raspberry Pi, and more. Outputs Euler angles, quaternions, acceleration, and gyroscope data at up to 100Hz.
- Add to cart
-
-
Out of Stock
- Environment Sensors
-
400.00 EGP
- The Sharp GP2Y1010AU0F sensor is an optical sensor that allows to determine the quality of air, by detecting the level of particles in the air. Its operation is based on an infrared emitting diode and a photo-transistor are positioned inside the device to detect light reflected by dust or particles in the air.
- Read more
-
-
Out of Stock
- Sensors
-
66.00 EGP
- Arduino Uno Sensor This shield is compatible with most types of Arduino boards that support the standard header layout including Uno, Leonardo, and Mega. It provides a convenient way to connect various sensor modules, servo's, or I2C LCD displays without the need for soldering. Please note: I2C interface compatible with Uno only. When connecting multiple servos please check power requirements of…
- Read more
-
-
-
- Environment Sensors
-
115.00 EGP
- The GY-68 BMP180 is a high-precision, low-power digital barometric pressure sensor module designed to measure atmospheric pressure and temperature with exceptional accuracy. Based on the Bosch BMP180 sensor, this compact 5-pin module is widely used in weather stations, altitude tracking, indoor navigation, and IoT applications. It communicates via I2C interface, making it easy to integrate with microcontrollers like Arduino, ESP8266, ESP32, and Raspberry Pi.
- Add to cart
-
-
- Sensors
-
125.00 EGP
- The BMP180 (GY-68) is a high-precision, low-power digital barometric pressure and temperature sensor, ideal for weather stations, altitude tracking, and IoT projects. With I2C interface and easy Arduino/Raspberry Pi compatibility, it’s perfect for measuring environmental data with high accuracy.
- Add to cart
-
-
- Environment Sensors
-
20.00 EGP
- Water detection sensor is used to detect water leak, water level or rains. This is obtained by having a series of parallel wires exposed traces. The sensor traces have a weak pull-up resistor of 1 MΩ. The resistor will pull the sensor trace value high until a drop of water shorts the sensor trace to the grounded trace.
- Add to cart
-
-
Out of Stock
Sale!
- Environment Sensors
-
1,061.50 EGP Original price was: 1,061.50 EGP.999.00 EGPCurrent price is: 999.00 EGP.
- The MiCS-6814 is a 3 sensor device suitable for gas leak detection and outdoor air quality monitoring. MiCS-6814 can detect many unhealthful gases, and three gases can be measured simultaneously due to its multi channels, so it can help you to monitor the concentration of gases where you expect the existence of more than one gas.
- Read more
-
-
- Sensors
-
110.00 EGP
- The ACS712 20A Current Sensor Module is a precise and compact solution for measuring both AC and DC currents up to ±20 Amperes. Based on the Allegro ACS712ELC-20A Hall-effect sensor IC, this module outputs a voltage proportional to the current passing through it, making it ideal for current monitoring and protection in various electronic and electrical systems. It is widely…
- Add to cart
-
-
- Current Sensors
-
110.00 EGP
- The ACS712 30A Current Sensor Module is a compact and accurate module for measuring both AC and DC currents up to ±30 Amperes. It is based on the Allegro ACS712ELC-30A Hall-effect sensor IC, which provides electrical isolation and a linear analog voltage output proportional to the current. This module is ideal for current sensing in microcontroller-based projects such as Arduino,…
- Add to cart
-
-
-
- Touch Sensors
-
100.00 EGP
- The Capacitive Touch Sensor Switch Module is a versatile and compact touch-activated switch designed for a wide range of DIY electronics and automation projects. It supports DC input from 3V to 30V and can handle up to 2A current, making it suitable for controlling lights, small motors, and other low-power devices. This module replaces traditional mechanical switches with a modern…
- Add to cart
-
-
- Weather Sensors
-
50.00 EGP
- A reliable, low-cost environmental sensor that provides digital output for real-time temperature and humidity monitoring, perfect for weather stations, smart home systems, and IoT applications.
- Add to cart
-
-
- Weather Sensors
-
93.50 EGP
- DHT22 Digital Temperature and Humidity Sensor AM2302. This is the most commonly used digital temperature and humidity sensor.
- Add to cart
-
-
- Weather Sensors
-
210.00 EGP
- The DHT22 Precision Digital Temperature and Humidity Sensor Module is an excellent balance of accuracy, reliability, and ease of use. Whether you’re a hobbyist creating a DIY project, a student working on academic experiments, or an engineer developing IoT and industrial solutions, this sensor provides precise climate data you can depend on. With its digital interface, low power consumption, and…
- Add to cart
-
-
- Temperature Sensors
-
75.00 EGP
- This Digital Thermometer features a high-precision waterproof probe and a clear LCD display, making it perfect for cooking, brewing, aquariums, labs, and industrial use. Get fast, reliable readings in Celsius (°C) or Fahrenheit (°F) with ±0.5°C accuracy!
- Add to cart
-
-
-
- Temperature Sensors
-
65.00 EGP
- The DS18B20 Waterproof Temperature Sensor is a high-precision digital thermometer encased in a stainless steel probe, making it ideal for use in wet or harsh environments. It uses a 1-Wire communication protocol, allowing multiple sensors to be connected to a single data line for efficient and scalable temperature monitoring. This sensor is widely used in Arduino, Raspberry Pi, and other…
- Add to cart
-
-
Out of Stock
- Proximity Sensors
-
250.00 EGP
- This is an infrared proximity sensor. It has an adjustable range from up to 30cm and a digital output with indicating LED. It works on a wide range of DC supply voltage (6:36 V). This makes it suitable for high voltage control applications such as PLC
- Read more
-
-
-
-
-
Sale!
- Infrared Sensors
-
35.00 EGP Original price was: 35.00 EGP.30.00 EGPCurrent price is: 30.00 EGP.
- The FC-51 IR Obstacle Avoidance Sensor is a compact, reliable module designed to detect objects using infrared light. Featuring a 3-pin interface, it easily integrates with Arduino, Raspberry Pi, and other microcontrollers. Ideal for robotics, automation, and smart home projects, it provides fast, accurate detection of nearby obstacles, helping your projects navigate safely and efficiently.
- Add to cart
-
-
- Medical Sensors
-
145.00 EGP
- The Finger Heart Rate Sensor is a compact, high-sensitivity photoplethysmography (PPG) sensor designed for non-invasive pulse rate detection. It uses optical technology to measure blood flow changes in the fingertip, providing real-time heart rate (BPM) and pulse waveform data. This sensor is perfect for Arduino, Raspberry Pi, ESP32, and other microcontrollers, making it ideal for health monitoring, fitness tracking, wearable devices, and biomedical projects. Its plug-and-play design ensures easy integration,…
- Add to cart
-
-
Out of Stock
- Environment Sensors
-
66.00 EGP
- BH1750FVI is a digital Ambient Light Sensor IC for I2 Cbus interface. This IC is the suitable for obtaining the ambient light data for adjusting LCD and Keypad backlight power of Mobile phone. It is possible to detect wide range at high resolution.
- Read more
-
-
- Other Sensors
-
290.00 EGP
- The GY-31 TCS3200 is a programmable color light-to-frequency converter that detects RGB (Red, Green, Blue) components of any object. It’s widely used in color sorting, industrial automation, LED tuning, and educational robotics.
- Add to cart
-
-
-
- Medical Sensors
-
385.00 EGP
- Professional Solution for Heart Rate Monitoring This medical-grade ECG kit features Analog Devices' AD8232 chip, delivering clinical-quality heart rate data perfect for: DIY medical devices Wearable health tech Sports science research Patient monitoring systems
- Add to cart
-
-
Out of Stock
- Environment Sensors
-
38.50 EGP
- HR202 is a new kind of humidity-sensitive resistor made from organic macromolecule materials, it can be used in occasions like: hospitals, storage, workshop, textile industry, tobaccos, pharmaceutical field, meteorology, etc.
- Read more
-
-
-
Sale!
- Sensors
-
750.00 EGP Original price was: 750.00 EGP.650.00 EGPCurrent price is: 650.00 EGP.
- IMU 9DOF Sensor combines three high-performance sensors—ITG3205 (gyroscope), ADXL345 (accelerometer), and HMC5883L (magnetometer)—into a single compact module, providing 9 degrees of freedom (9DOF) motion tracking. This sensor is ideal for robotics, drones, navigation systems, augmented reality (AR), virtual reality (VR), and other applications requiring precise orientation and motion detection.
- Add to cart
-
-
Out of Stock
- Current Sensors
-
110.00 EGP
- The INA219 High-Side DC Current Sensor is a precision I²C-based module that measures current (up to ±3.2A), voltage (up to 26V), and power in DC circuits—all while keeping your system electrically isolated. Ideal for battery monitoring, solar trackers, robotics, and power management, this sensor provides 0.1mA resolution with ±1% accuracy, making it perfect for both hobbyist and professional applications. With its bidirectional current sensing capability, the INA219 can detect both charging and discharging currents,…
- Read more
-
-
- Environment Sensors
-
30.00 EGP
- The 3-Pin Infrared Flame Sensor Module is a compact, high-sensitivity fire detection module designed to identify flames by sensing their infrared (IR) radiation (760nm–1100nm wavelength). Ideal for fire alarms, safety systems, and DIY electronics projects, this sensor provides a digital output signal (HIGH/LOW) when a flame is detected, making it easy to integrate with Arduino, Raspberry Pi, and other microcontrollers. With its simple 3-pin interface (VCC, GND, OUT), adjustable sensitivity,…
- Add to cart
-
-
- Infrared Sensors
-
70.00 EGP
- The KY-032 Infrared Obstacle Avoidance Sensor is a reflective IR-based proximity detector designed for object detection, collision avoidance, and automation projects. Using an infrared transmitter and receiver pair, this module detects obstacles within 2cm–40cm and outputs a digital signal (HIGH/LOW), making it ideal for robotics, smart cars, and industrial applications. With adjustable sensitivity, compact design, and easy microcontroller integration, the KY-032 is perfect for beginners and advanced users in electronics and robotics.
- Add to cart
-
-
-
- Infrared Sensors, Sensors
-
45.00 EGP
- The Infrared Remote Control with IR Receiver Module Kit is a simple yet powerful solution designed for wireless control applications. Whether you are a beginner working on small DIY electronics projects, an engineering student learning about microcontroller communication, or a professional looking for a reliable remote interface, this kit provides everything you need in one package. This product combines an…
- Add to cart
-
-
Out of Stock
- Temperature Sensors
-
200.00 EGP
- _x000D__x000D_The best choice for remotely (non-contact) human temperature measurements _x000D__x000D_Infrared Temperature Sensor Module (GY-906 MLX90614ESF) is an infrared temperature sensor using chips MLX90614ESF 3.3V power connections I2C (using a 2-wire line SDA, SCL) to measure the temperature of -70 to 380 ° the C 's. Without touching And can also measure the temperature of the environment at -40 to 125 ° C, Resolution 0.02 ° C
- Read more
-
-
- Infrared Sensors
-
5.00 EGP
- IR Photo diode is used to detect the light rays reflected from an IR LED. Photo diode is a reverse biased PN junction diode. When photo diode is exposed to light, electrical resistance across the diode decreases there by increasing the reverse current. If the photodiode is not exposed to light, resistance across the will be high .hence reverse current…
- Add to cart
-
-
- Infrared Sensors
-
5.00 EGP
- This 5mm blue IR receiver photodiode is a high-sensitivity infrared signal detector designed for remote control systems, proximity sensing, and DIY electronics projects. Its blue tint filter enhances immunity to visible light interference, making it ideal for reliable IR communication.
- Add to cart
-
-
- Infrared Sensors
-
2.00 EGP
- This 5mm IR LED is a high-efficiency infrared transmitter designed for wireless communication, remote controls, night vision systems, and proximity sensors. Emitting 940nm wavelength light (invisible to the human eye), it pairs perfectly with IR receivers (like TSOP1838) for reliable signal transmission.
- Add to cart
-
-
- Infrared Sensors
-
85.00 EGP
- Upgrade your robotics and automation projects with this high-precision 4-channel IR tracking sensor to achieve smooth, reliable, and intelligent navigation.
- Add to cart
-
-
- Other Sensors
-
60.00 EGP
- The knock sensor, detects the knocks and the taps. It can work like a switch. The sensor sends data momentarily to the board. To keep the LED on, the button state change codes should be used. So the sensor will work as a switch.
- Add to cart
-
-
- Infrared Sensors, Sensors
-
25.00 EGP
- The KY-22 (HX1838B) is a 38kHz infrared receiver module commonly used for IR remote control signal reception in Arduino and electronics projects. It decodes signals from standard IR remotes (TV, AC, DVD players).
- Add to cart
-
-
- Medical Sensors, Modules, Other Modules, Sensors
-
30.00 EGP
- The KY-039 Heartbeat Sensor Module is a photoplethysmography (PPG)-based sensor designed to detect heartbeat/pulse signals by measuring blood flow changes in fingertips or earlobes. This low-cost module uses an infrared (IR) LED and phototransistor to capture pulse waveforms, making it ideal for health monitoring, fitness tracking, and biomedical projects. With simple analog output compatibility, the KY-039 can interface with Arduino, Raspberry Pi, and other microcontrollers to visualize real-time pulse data or trigger alerts.
- Add to cart
-
-
- Environment Sensors
-
30.00 EGP
- The LDR (Light Dependent Resistor) Sensor Module is a light-sensitive detection module that measures ambient light intensity using a photoresistor. With a 3-pin interface (VCC, GND, OUT), this module provides both digital (HIGH/LOW) and analog (variable voltage) outputs, making it ideal for light-triggered automation, security systems, and smart lighting projects. Designed for Arduino, Raspberry Pi, and other microcontrollers, this module is widely used in energy-saving devices, weather stations, and DIY electronics.
- Add to cart
-
-
-
-
-
- Distance Sensors, Magnetic Sensors, Sensors
-
60.00 EGP
- The KY-024 Linear magnetic Hall sensor reacts in the presence of a magnetic field. It has a potentiometer to adjust the sensitivity of the sensor and it provides both analog and digital outputs.
- Add to cart
-
-
- Sensors
-
1,850.00 EGP
- Measure water acidity with the Liquid pH 0–14 Sensor Module — accurate, Arduino-compatible pH sensor for hydroponics, IoT, and water quality monitoring systems.
- Add to cart
-
-
- Other Sensors, Sensors
-
1,800.00 EGP
- This PH sensor module detects pH levels from 0-14 in liquids, making it ideal for hydroponics, aquariums, water quality monitoring, and chemical experiments. The module outputs an analog signal for easy interfacing with Arduino, ESP8266, or other microcontrollers, but requires a separate BNC pH electrode probe (sold separately).
- Add to cart
-
-
-
- Temperature Sensors
-
75.00 EGP
- The LM75A is a precision digital temperature sensor with an integrated I2C interface, designed for easy and accurate temperature measurement in a wide range of applications. It offers a simple, low-power solution for temperature monitoring with a high level of accuracy and reliability.
- Add to cart
-
-
- Sensors, Weight Sensors
-
80.00 EGP
- The Load Cell 10kg – Straight Bar Weight Sensor is a versatile and high-performance sensor for Arduino, Raspberry Pi, and professional applications. With accurate readings, durable alloy steel construction, and compact design, it is ideal for digital scales, robotic force detection, and laboratory experiments.
- Add to cart
-
-
- Sensors
-
70.00 EGP
- The Load Cell 1kg – Straight Bar Weight Sensor is a high-precision sensor designed to measure weight and force in electronic weighing systems, industrial applications, and DIY electronics projects. With a 1kg capacity, this straight bar load cell provides accurate and reliable measurements, making it ideal for Arduino, Raspberry Pi, and microcontroller-based projects.
- Add to cart
-
-
- Weight Sensors
-
80.00 EGP
- Our 20kg Straight Bar Load Cell delivers high-precision weight detection for medium-duty applications. Built with aircraft-grade aluminum alloy, this sensor is perfect for industrial automation, heavy-duty scales, and machinery requiring reliable 20kg (44 lb) load measurement.
- Add to cart
-
-
Sale!
- Motion Sensors
-
1,400.00 EGP Original price was: 1,400.00 EGP.1,230.00 EGPCurrent price is: 1,230.00 EGP.
- Long Flex/Bending Sensor 4.5" (114mm) – accurate motion and bending detection for Arduino, Raspberry Pi, and microcontroller projects. Ideal for wearables, robotics, and DIY electronics.
- Add to cart
-
-
-
-
Sale!
- Medical Sensors
-
120.00 EGP Original price was: 120.00 EGP.95.00 EGPCurrent price is: 95.00 EGP.
- The MAX30100 is a highly integrated optical sensor that combines two key health monitoring functions: pulse oximetry (SpO₂) and heart rate detection. It uses LEDs, photodetectors, and low-noise analog signal processing to provide accurate and real-time biometric data.
- Add to cart
-
-
- Medical Sensors, Sensors
-
115.00 EGP
- The MAX30102 is an advanced biosensor module designed for non-invasive heart rate and SpO₂ (blood oxygen saturation) monitoring. Ideal for health monitoring applications, this compact module integrates two LEDs (red and IR), a photodetector, optical elements, and low-noise electronics with ambient light rejection – all in one package. It communicates via I2C interface, making it easy to integrate with Arduino,…
- Add to cart
-
-
Out of Stock
- Temperature Sensors
-
275.00 EGP
- This I2C digital temperature sensor is one of the more accurate/precise we've ever seen, with a typical accuracy of ±0.25°C over the sensor's -40°C to 125°C range and precision of 0.0625°C. They work great with any microcontroller using standard i2c. There are 3 address pins so you can connect up to 8 to a single I2C bus without address collisions.…
- Read more
-
-
Out of Stock
- Sensors
-
65.00 EGP
- DIY Kit Metal Detector Kit Electronic Kit DC 3V-5V 60mm Non-contact Sensor Board Module DIY Electronic Part Metal Detector.
- Read more
-
-
- Audio Sensors
-
35.00 EGP
- Buy the Microphone Sound Detection Sensor 4 Pin for Arduino and microcontrollers. Features analog and digital outputs, adjustable sensitivity, and easy integration for sound detection, automation, and voice-activated projects.
- Add to cart
-
-
-
-
Out of Stock
- Other Sensors
-
60.50 EGP
- The MMA7455L is a Digital Output (I2C/SPI), low power, low profile capacitive micromachined accelerometer
- Read more
-
-
- Environment Sensors
-
80.00 EGP
- The MQ-135 is a semiconductor gas sensor designed to detect air quality and hazardous gases including: NH₃ (Ammonia) NOx (Nitrogen Oxides) CO₂ (Carbon Dioxide) Benzene Alcohol Smoke It's widely used in air quality monitoring systems, industrial safety devices, and environmental projects.
- Add to cart
-
-
- Environment Sensors
-
70.00 EGP
- The MQ-2 gas sensor module detects smoke, LPG, propane, butane, hydrogen, and flammable gases in the air. Ideal for fire alarms, air quality monitors, and industrial safety systems, this module provides analog & digital output for easy integration with Arduino, ESP8266, and Raspberry Pi.
- Add to cart
-
-
- Environment Sensors
-
75.00 EGP
- The MQ-3 gas sensor module specializes in detecting alcohol (ethanol) vapor and is widely used in breathalyzers, drunk-driving prevention systems, and industrial alcohol monitoring. With analog & digital outputs, it easily interfaces with Arduino, ESP32, Raspberry Pi, and other microcontrollers.
- Add to cart
-
-
-
- Environment Sensors, Modules
-
75.00 EGP
- MQ-5 GAS sensor module Sensitive material of MQ-5 gas sensor module is SnO2, which with lower conductivity in clean air. When the target combustible gas exist, The sensors conductivity is more higher along with the gas concentration rising. Please use simple electrocircuit, convert change of conductivity to correspond output signal of gas concentration. MQ-5 gas sensor module has high sensitity…
- Add to cart
-
-
- Environment Sensors
-
80.00 EGP
- The MQ-6 gas sensor module is optimized for detecting liquefied petroleum gas (LPG), propane, and butane, making it ideal for home safety, industrial monitoring, and DIY gas leak detectors. With analog and digital outputs, it works seamlessly with Arduino, ESP8266, Raspberry Pi, and other microcontrollers.
- Add to cart
-
-
- Environment Sensors
-
90.00 EGP
- The MQ-7 gas sensor module is specifically designed to detect carbon monoxide (CO) concentrations in the air, making it essential for home safety, industrial monitoring, and DIY environmental projects. With analog and digital outputs, it easily interfaces with Arduino, ESP8266, Raspberry Pi, and other microcontrollers.
- Add to cart
-
-
-
- Environment Sensors
-
70.00 EGP
- The MQ-8 gas sensor module is designed for hydrogen (H₂) detection, making it essential for fuel cell applications, laboratory safety, and industrial leak monitoring. With analog and digital outputs, it integrates easily with Arduino, ESP32, Raspberry Pi, and other microcontrollers.
- Add to cart
-
-
Sale!
- Environment Sensors
-
400.00 EGP Original price was: 400.00 EGP.200.00 EGPCurrent price is: 200.00 EGP.
- The MS5607 Altimeter Module is a high-accuracy barometric pressure and temperature sensor designed for altitude measurement, weather monitoring, and flight data logging. Based on the MS5607-02BA03 chip from TE Connectivity, this module provides digital output with ultra-low power consumption, making it ideal for drones, weather stations, and outdoor navigation systems.
- Add to cart
-
-
-
- Temperature Sensors
-
45.00 EGP
- This NTC 100K thermistor is a high-accuracy temperature sensor with a 1-meter insulated cable, designed for temperature monitoring, thermal protection, and environmental sensing. Its negative temperature coefficient (NTC) resistance provides reliable readings for Arduino, Raspberry Pi, and industrial controllers.
- Add to cart
-
-
- Temperature Sensors
-
25.00 EGP
- This NTC thermistor module provides an easy-to-use, analog temperature sensing solution with a 3-pin interface (VCC, GND, OUT), designed for Arduino, Raspberry Pi, and DIY electronics projects. It converts the NTC thermistor's resistance changes into a readable voltage signal for precise temperature monitoring.
- Add to cart
-
-
Out of Stock
- Proximity Sensors
-
561.00 EGP
- OMCH Diffuse Photo Electric Proximity Sensor Switch - AMPLIFIER BUILT-IN - can distinguish the opaque reflective object, with less susceptible to interference, fast reaction, long life, high resolution and high reliability.WaterProof(IP65) Price Includes 14% Taxes (One Year Warranty)
- Read more
-
-
Out of Stock
- Proximity Sensors
-
577.50 EGP
- OMCH Diffuse Photo Electric Proximity Sensor Switch - AMPLIFIER BUILT-IN - can distinguish the opaque reflective object, with less susceptible to interference, fast reaction, long life, high resolution and high reliability.Price Includes 14% Taxes (One Year Warranty)
- Read more
-
-
Out of Stock
- Proximity Sensors
-
577.50 EGP
- OMCH Diffuse Photo Electric Proximity Sensor Switch - AMPLIFIER BUILT-IN - can distinguish the opaque reflective object, with less susceptible to interference, fast reaction, long life, high resolution and high reliability.WaterProof(IP65)Price Includes 14% Taxes (One Year Warranty)
- Read more
-
-
Out of Stock
- Proximity Sensors
-
561.00 EGP
- OMCH Diffuse Photo Electric Proximity Sensor Switch - AMPLIFIER BUILT-IN - can distinguish the opaque reflective object, with less susceptible to interference, fast reaction, long life, high resolution and high reliability.WaterProof(IP65)Price Includes 14% Taxes (One Year Warranty)
- Read more
-
-
Out of Stock
- Proximity Sensors
-
577.50 EGP
- OMCH Diffuse Photo Electric Proximity Sensor Switch - AMPLIFIER BUILT-IN - can distinguish the opaque reflective object, with less susceptible to interference, fast reaction, long life, high resolution and high reliability.WaterProof(IP65)Price Includes 14% Taxes (One Year Warranty)
- Read more
-
-
Out of Stock
- Proximity Sensors
-
638.00 EGP
- Relay Built-In Universal photoelectric sensor can distinguish the opaque reflective object, with less susceptible to interference, fast reaction, long life, high resolution and high reliability.WaterProof(IP65)Price Includes 14% Taxes (One Year Warranty)
- Read more
-
-
Out of Stock
- Proximity Sensors
-
528.00 EGP
- Retro-reflective photoelectric sensor has long effective distance range with the help of reflective board.Infrared photoelectric sensor can distinguish the opaque reflective object, with less susceptible to interference, fast reaction, long life, high resolution and high reliability.Price Includes 14% Taxes (One Year Warranty)
- Read more
-
-
Out of Stock
- Proximity Sensors
-
467.50 EGP
- Retro-reflective photoelectric sensor has long effective distance range with the help of reflective board.The supply voltage is DC 12V-24V (6-36V)Infrared photoelectric sensor can distinguish the opaque reflective object, with less susceptible to interference, fast reaction, long life, high resolution and high reliability.WaterProof(IP65)Price Includes 14% Taxes (One Year Warranty)
- Read more
-
-
Out of Stock
- Proximity Sensors
-
489.50 EGP
- Retro-reflective photoelectric sensor has long effective distance range with the help of reflective board.The supply voltage is DC 12V-24V (6-36V)Infrared photoelectric sensor can distinguish the opaque reflective object, with less susceptible to interference, fast reaction, long life, high resolution and high reliability.Price Includes 14% Taxes (One Year Warranty)
- Read more
-
-
Out of Stock
- Proximity Sensors
-
621.50 EGP
- OMCH Diffuse Photo Electric Proximity Sensor Switch - AMPLIFIER BUILT-IN - can distinguish the opaque reflective object, with less susceptible to interference, fast reaction, long life, high resolution and high reliability.Price Included 14% Taxes (One Year Warranty)
- Read more
-
-
Out of Stock
- Proximity Sensors
-
489.50 EGP
- Retro-reflective photoelectric sensor has long effective distance range with the help of reflective board. The supply voltage is DC 12V-24V (6-36V) Infrared photoelectric sensor can distinguish the opaque reflective object, with less susceptible to interference, fast reaction, long life, high resolution and high reliability. Price Includes 14% taxes (One Year Warranty)
- Read more
-
-
Out of Stock
- Proximity Sensors
-
467.50 EGP
- Retro-reflective photoelectric sensor has long effective distance range with the help of reflective board.The supply voltage is DC 12V-24V (6-36V)Infrared photoelectric sensor can distinguish the opaque reflective object, with less susceptible to interference, fast reaction, long life, high resolution and high reliability.WaterProof(IP65)Price Includes 14% Taxes (One Year Warranty)
- Read more
-
-
Out of Stock
- Proximity Sensors
-
621.50 EGP
- OMCH Diffuse Photo Electric Proximity Sensor Switch - AMPLIFIER BUILT-IN - can distinguish the opaque reflective object, with less susceptible to interference, fast reaction, long life, high resolution and high reliability.Price Included 14% Taxes (One Year Warranty)
- Read more
-
-
Out of Stock
- Proximity Sensors
-
594.00 EGP
- OMCH Diffuse Photo Electric Proximity Sensor Switch - AMPLIFIER BUILT-IN - can distinguish the opaque reflective object, with less susceptible to interference, fast reaction, long life, high resolution and high reliability.WaterProof(IP65)Price Includes 14% Taxes (One Year Warranty)
- Read more
-
-
Out of Stock
- Proximity Sensors
-
731.50 EGP
- OMCH Diffuse Photo Electric Proximity Sensor Switch- AMPLIFIER BUILT-IN - can distinguish the opaque reflective object, with less susceptible to interference, fast reaction, long life, high resolution and high reliability.Price Includes 14% Taxes (One Year Warranty)
- Read more
-
-
- Proximity Sensors
-
764.50 EGP
- OMCH Diffuse Photo Electric Proximity Sensor Switch - AMPLIFIER BUILT-IN - can distinguish the opaque reflective object, with less susceptible to interference, fast reaction, long life, high resolution and high reliability. Price Includes 14% Taxes (One Year Warranty)
- Add to cart
-
-
Out of Stock
- Proximity Sensors
-
583.00 EGP
- Infrared photoelectric sensor can distinguish the opaque reflective object, with less susceptible to interference, fast reaction, long life, high resolution and high reliability. The supply voltage is DC 12V-24V (6-36V)WaterProof(IP65) Price Includes 14% Taxes (One Year Warranty)
- Read more
-
-
Out of Stock
- Proximity Sensors
-
731.50 EGP
- OMCH Diffuse Photo Electric Proximity Sensor Switch - AMPLIFIER BUILT-IN - can distinguish the opaque reflective object, with less susceptible to interference, fast reaction, long life, high resolution and high reliability. Price Includes 14% Taxes (One Year Warranty)
- Read more
-
-
Out of Stock
- Proximity Sensors
-
1,343.00 EGP
- Relay Built-In Universal photoelectric sensor can distinguish the opaque reflective object, with less susceptible to interference, fast reaction, long life, high resolution and high reliability.WaterProof(IP65)Price Includes 14% taxes (One Year Warranty)
- Read more
-
-
Out of Stock
- Proximity Sensors
-
616.00 EGP
- Infrared photoelectric sensor can distinguish the opaque reflective object, with less susceptible to interference, fast reaction, long life, high resolution and high reliability.The supply voltage is AC 110V-220V (90-250V).WaterProof(IP65)Price Includes 14% Taxes (One Year Warranty)
- Read more
-
-
Out of Stock
- Proximity Sensors
-
764.50 EGP
- OMCH Diffuse Photo Electric Proximity Sensor Switch - AMPLIFIER BUILT-IN - can distinguish the opaque reflective object, with less susceptible to interference, fast reaction, long life, high resolution and high reliability.Price Includes 14% Taxes (One Year Warranty)
- Read more
-
-
Out of Stock
- Proximity Sensors
-
1,500.00 EGP
- Infrared photoelectric sensor can distinguish the opaque reflective object, with less susceptible to interference, fast reaction, long life, high resolution and high reliability.The supply voltage is DC 12V-24V (6-36V)WaterProof(IP65)Price Includes 14% Taxes (One Year Warranty)
- Read more
-
-
-
- Environment Sensors
-
22.00 EGP
- The 20mm Photo Resistor (LDR – Light Dependent Resistor) features a large sensing surface that offers enhanced sensitivity to light, making it ideal for applications requiring precise detection of ambient light intensity. This sensor’s resistance varies inversely with the light exposure, providing reliable performance in both hobbyist and industrial projects.
- Add to cart
-
-
- Environment Sensors
-
14.00 EGP
- The 10mm Photo Resistor (LDR – Light Dependent Resistor) is a highly sensitive light sensor that changes its resistance based on the amount of light it detects. It is ideal for a wide range of light sensing applications, from DIY electronics to industrial automation systems.
- Add to cart
-
-
- Environment Sensors
-
3.00 EGP
- This 3mm Light Dependent Resistor (LDR) is a compact and reliable light sensor that changes its resistance based on the light intensity falling on it. It’s ideal for light-sensing applications such as automatic lighting, solar garden lights, and DIY Arduino projects.
- Add to cart
-
-
- Environment Sensors
-
8.00 EGP
- The 7mm Photo Resistor (LDR – Light Dependent Resistor) is a light-sensitive electronic component that changes its resistance based on the intensity of light falling on it. It is compact, reliable, and perfect for a wide range of light detection applications in both hobbyist and professional projects.
- Add to cart
-
-
-
-
- Sensor Accessories
-
11.00 EGP
- This clear ABS bracket has two screw holes for the module to be attached to the bracket, and two to connect the bracket securely to your project. Nuts and screws are also included.
- Add to cart
-
-
- Motion Sensors
-
50.00 EGP
- he PIR Motion Sensor Module HC-SR501 is a reliable, affordable, and easy-to-use infrared motion detector that belongs in every electronics toolkit. With its wide detection range, adjustable settings, low power consumption, and compatibility with Arduino and Raspberry Pi, it is perfect for DIY, robotics, security systems, smart homes, and STEM education. Whether you are a hobbyist experimenting with Arduino, a…
- Add to cart
-
-
-
-
Out of Stock
Sale!
- Proximity Sensors
-
100.00 EGP Original price was: 100.00 EGP.60.00 EGPCurrent price is: 60.00 EGP.
- The PL-05P is a PNP-type inductive proximity sensor designed for accurate non-contact detection of metal objects. Ideal for automation systems, CNC machinery, robotics, and industrial applications, it delivers fast, reliable switching with long lifespan.
- Read more
-
-
-
- Weather Sensors
-
45.00 EGP
- The Raindrop Sensor Module Water Sensor is a compact and reliable module designed to detect water, rain, or surface moisture. Featuring dual outputs (analog & digital), adjustable sensitivity, and a corrosion-resistant sensor board, it’s perfect for projects like smart irrigation, weather monitoring, leakage alarms, and DIY electronics. Compatible with Arduino, Raspberry Pi, ESP8266, and ESP32, this sensor offers quick response,…
- Add to cart
-
-
- Motion Sensors
-
40.00 EGP
- The RCWL-0516 is a Doppler radar-based motion sensor that detects human movement, vehicles, or objects using microwave RF signals (3.18GHz). Unlike PIR sensors, it works through walls/obstacles and isn’t affected by heat or ambient light. Perfect for smart lighting, security systems, and automation!
- Add to cart
-
-
- Weight Sensors
-
650.00 EGP
- This is a force sensitive resistor with a round, 0.5" diameter, sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the FSR its resistance will be larger than 1MΩ. This FSR can sense applied…
- Add to cart
-
-
Out of Stock
- Distance Sensors
-
200.00 EGP
- The Sharp GP2Y0A21 IR Infrared Distance Sensor is an analog proximity sensor with a range of 10-80cm.
- Read more
-
-
Sale!
- Motion Sensors
-
850.00 EGP Original price was: 850.00 EGP.750.00 EGPCurrent price is: 750.00 EGP.
- Short Flex/Bending Sensor 2.2" (56mm) – measure bending, detect motion, and build interactive electronics projects with Arduino, Raspberry Pi, and microcontrollers.
- Add to cart
-
-
- Temperature Sensors
-
400.00 EGP
- The SHT20 is a high-precision digital temperature and humidity sensor from Sensirion, designed for embedded applications, weather stations, and IoT devices. With I2C interface and factory-calibrated output, it provides reliable environmental sensing in a compact, low-power package.
- Add to cart
-
-
-
-
-
- Environment Sensors
-
50.00 EGP
- Buy the Soil Moisture Detection Humidity Sensor for Arduino and microcontrollers. Perfect for smart irrigation, gardening, IoT farming, and environmental monitoring projects. Features analog & digital outputs with adjustable sensitivity.
- Add to cart
-
-
-
Out of Stock
- Vibration Sensors
-
4.50 EGP
- SW-420 normally closed highly sensitive axial vibration sensor switch moisture and dust proof housing.Vibration resistance varies with the intensity of vibrations.
- Read more
-
-
- Infrared Sensors
-
35.00 EGP
- TCRT5000 infrared sensor emits infrared emitting diode continuously when no infrared rays emitted or reflected back is reflected back but the strength is not large enough, the phototransistor has been in the off state, and the output terminal of the module is high, indicating that the diode has been in the off state; in the object to be detected within…
- Add to cart
-
-
- Infrared Sensors
-
30.00 EGP
- The TCRT5000 is a compact infrared sensor module used to detect lines and surface contrasts. With a 4-pin interface (VCC, GND, OUT, GND), it’s easy to connect to Arduino, Raspberry Pi, and other microcontrollers. Ideal for line-following robots, automated vehicles, and DIY electronics projects, this lightweight sensor offers reliable and precise performance in a small, easy-to-install package.
- Add to cart
-
-
- Environment Sensors
-
750.00 EGP
- Monitor water purity with the TDS Sensor Meter V1.0 — accurate, Arduino-compatible module for measuring total dissolved solids in any water source.
- Add to cart
-
-
Out of Stock
- Temperature Sensors
-
50.00 EGP
- Humidity testing, humidity sensors, environment humidity testing, relay output, direct power control related equipment
- Read more
-
-
- Sensors
-
420.00 EGP
- The ToF10120 is a highly accurate time-of-flight (ToF) laser range sensor designed for precise distance measurement in various applications. Using advanced optical and electronic components, it offers stable performance in the range of 10cm to 180cm with a fast response time. The RS232 interface makes it easy to integrate into industrial systems, robotics, and IoT projects.
- Add to cart
-
-
- Touch Sensors
-
15.00 EGP
- Add sleek, button-free control to your electronics projects with the TTP223 capacitive touch sensor module. This tiny yet powerful module detects finger touches with high sensitivity, making it ideal for interactive projects, smart home devices, and more.
- Add to cart
-
-
- Sensors
-
900.00 EGP
- Accurate | Reliable | Easy to Use Monitor water clarity with precision using our Turbidity Sensor, designed to detect suspended particles in water for a wide range of applications. Whether you're testing drinking water, aquariums, hydroponics, or environmental water sources, this sensor provides reliable measurements to ensure water quality.
- Add to cart
-
-
Sale!
- Distance Sensors
-
55.00 EGP Original price was: 55.00 EGP.45.00 EGPCurrent price is: 45.00 EGP.
- Ultrasonic Distance Sensor HC-SR04 – 2cm to 400cm range, high accuracy, 5V, Arduino & Raspberry Pi compatible. Perfect for robotics & automation projects.
- Add to cart
-
-
-
- Sensor Accessories
-
15.00 EGP
- Enhance your ultrasonic sensor projects with this blue acrylic mounting bracket, specially designed for the HC-SR04 Ultrasonic Distance Sensor. This bracket offers a secure, stylish, and reliable mounting solution for your robotics and DIY applications.
- Add to cart
-
-
- Sensor Accessories, Sensors
-
15.00 EGP
- Upgrade your ultrasonic sensor setup with this transparent mounting bracket holder, designed specifically for the HC-SR04 ultrasonic distance sensor. Made from high-quality acrylic material, this bracket ensures a secure and stable mounting solution while offering a sleek, professional appearance for your projects.
- Add to cart
-
-
-
- Sensors
-
40.00 EGP
- The SW-420 NC Vibration Sensor is a high-sensitivity vibration detection module designed to detect sudden movements, shocks, or vibrations in various applications. It features a Normally Closed (NC) vibration switch that triggers when subjected to motion, making it ideal for security systems, anti-theft devices, vehicle monitoring, and DIY electronics projects. This sensor is compact, easy to integrate, and works well with microcontrollers…
- Add to cart
-
-
-
Out of Stock
Sale!
- Distance Sensors
-
300.00 EGP Original price was: 300.00 EGP.275.00 EGPCurrent price is: 275.00 EGP.
- The I2C address of the VL53L1X is 0x29 and is hardware defined.
- Read more
-
-
- Temperature Sensors
-
100.00 EGP
- The W1209 is a programmable digital thermostat module designed for temperature control applications such as heating/cooling systems, incubators, aquariums, and DIY thermal regulation projects. It features a 12-bit high-precision sensor, adjustable hysteresis, and a relay output for automatic switching.
- Add to cart
-
-
-
-
- Environment Sensors
-
240.00 EGP
- The YF-S401 Water Flow Sensor is a reliable and precise sensor designed to measure the rate of water flow through a pipe. Ideal for Arduino, Raspberry Pi, and other microcontroller platforms, this sensor outputs a digital pulse signal that corresponds to the water flow rate, allowing for real-time monitoring and control in a wide range of applications.
- Add to cart
-
-
Out of Stock
Sale!
- Environment Sensors
-
80.00 EGP Original price was: 80.00 EGP.60.00 EGPCurrent price is: 60.00 EGP.
- A float switch is a device used to sense the level of liquid within a tank, it may actuate a pump, an indicator, an alarm, or other device.
- Read more
-
-
- Environment Sensors
-
735.00 EGP
- The Water Turbidity Sensor Module is an optical sensor used to detect the presence and concentration of suspended particles in water by measuring its turbidity. It provides both analog and digital output signals, making it ideal for integration with Arduino, Raspberry Pi, ESP32, and other microcontrollers. This sensor works by emitting an infrared light beam through the water and measuring…
- Add to cart
-
-
Sale!
- Environment Sensors
-
1,350.00 EGP Original price was: 1,350.00 EGP.1,100.00 EGPCurrent price is: 1,100.00 EGP.
- This is an amazing digital pressure sensor from Intersema has wide range applications.The MS5540C pressure sensor measures Absolute water or air pressure. It also measure temperature at the same time. So you can use it for measuring water depth in sea or water level in tank. It can be also be used with different fluids measurements such as oil. You…
- Add to cart
-
-
- Distance Sensors
-
330.00 EGP
- XKC-007Y-TX ultrasonic ranging module, using the transceiver is waterproof probe, try using non-contact ultrasonic detection technology designed. Products in the range of 25cm to 450cm, can accurately detect the distance between the plane of the object, and are within the range of 25cm to 150cm, can accurately measure people.
- Add to cart
-
-
Sale!
- Weather Sensors
-
450.00 EGP Original price was: 450.00 EGP.375.00 EGPCurrent price is: 375.00 EGP.
- The XH-M452 Dual Temperature & Humidity Control Module allows precise climate control for Arduino, DIY projects, greenhouses, and home automation systems.
- Add to cart
-
-
- Sensors
-
375.00 EGP
- The XKC-Y25-T12V Liquid Level Sensor is a high-precision, non-contact water level detection device designed for reliable and maintenance-free operation. Using advanced capacitive sensing technology, it can detect the presence or absence of liquid through non-metallic container walls, eliminating the need for direct contact with the liquid. This sensor is ideal for applications in water tanks, beverage machines, industrial equipment, and…
- Add to cart
