-
- Other Modules
1.75mm Filament Detection Sensor Module
- 110.00 EGP
- The 1.75mm Filament Detection Sensor Module is a mechanical end-stop switch designed for 3D printers to detect filament presence or jams. When filament runs out or breaks, the sensor triggers a low/high signal to pause printing, preventing failed prints. This module is compatible with most 3D printer boards (Creality, Prusa, RAMPS) and supports Marlin/Klipper firmware configurations.
- Add to cart
-
- Wireless
125kHz RFID Reader/Writer Module – Low-Frequency Proximity Card System
- 175.00 EGP
- This 125kHz RFID module is a low-frequency (LF) contactless card reader/writer compatible with EM4100, TK4100, and other 125kHz RFID tags. Ideal for access control, attendance systems, and DIY security projects, it offers reliable short-range identification with simple UART or Wiegand output.
- Add to cart
-
- Out of Stock
- Other Modules
12V Delay Timer Switch Adjustable
- 45.00 EGP
- This 12V Delay Timer Switch Adjustable 0-10sec is one kind of popular switch module. You can use it control any devices on or off. This is a DC12V controlled 1 channel timer relay module. It has a NE555 timer chip on the board. You can adjust delay time(0-10s) by rotating the potentiometer. When this relay get powered it will delay…
- Read more
-
-
- Other Modules
2 Channel 5V DC Relay Module Solid State Low Level trigger
- 175.00 EGP
- This 2-Channel 5V DC Solid State Relay (SSR) Module provides a fast, silent, and durable switching solution for low-power DC applications. Unlike mechanical relays, this solid-state module has no moving parts, ensuring longer lifespan, noiseless operation, and faster response times. Perfect for automation, IoT projects, and electronic control systems where reliability is key.
- Add to cart
-
- Wireless
2.4GHz Wireless Transceiver nRF 24L01 (85 meter)
- 65.00 EGP
- The nRF24L01 is a low-power, high-speed 2.4GHz wireless transceiver module designed for short to medium-range wireless communication. With an effective range of up to 85 meters in open space, it is ideal for wireless data transmission in remote controls, sensor networks, and IoT applications.
- Add to cart
-
- Other Modules
3 Axis Digital Gyroscope Sensor Module GY-50 L3G4200
- 125.00 EGP
- The GY-50 (L3G4200D) 3-Axis Digital Gyroscope Module is a high-performance MEMS gyroscope that measures angular velocity (degrees per second) around the X, Y, and Z axes. With a selectable scale range (±250°/s to ±2000°/s) and I2C/SPI interface, it’s ideal for drones, robotics, stabilization systems, and motion tracking. This module features low noise, high stability, and built-in temperature compensation, making it suitable for both hobbyist and industrial applications.
- Add to cart
-
- Out of Stock
- Other Modules
3D Printer Mechanical End Stop Switch Module
- 35.00 EGP
- 3D Printer Mechanical End Stop Switch Module is a Mechanical End stop kit or 3D Printers or CNC machines.
- Read more
-
-
- Sale!
- Other Modules
3D Printer Optical End Stop Switch Module For RAMPS
- Original price was: 50.00 EGP.35.00 EGPCurrent price is: 35.00 EGP.
- Upgrade your 3D printer’s precision with the Optical Endstop Switch Module, a high-accuracy, non-contact limit switch designed for RAMPS 1.4, RepRap, and other 3D printer control boards. Unlike mechanical endstops, this optical sensor eliminates physical wear, providing longer lifespan and more reliable homing performance.
- Add to cart
-
- Out of Stock
- Wireless
433MHZ TX/RXB6 MODULE
- 60.50 EGP
- 433MHZ TX/RXB6 MODULE
- Read more
-
-
- Wireless
85.6kbps SIM800L GSM GPRS Module without Antenna
- 290.00 EGP
- The SIM800L module supports quad-band GSM/GPRS network, available for GPRS and SMS message data remote transmission. The SIM800L communicates with microcontroller via UART port, supports command including 3GPP TS 27.007, 27.005 and SIMCOM enhanced AT Commands. It also has built-in level translation, so it can work with microcontroller of higher voltage than 2.8V default. Besides, the board also supports A-GPS…
- Add to cart
-
- Out of Stock
- Other Modules
ADS1115 16-Bit ADC – 4 Channel with Programmable Gain Amplifier
- 95.00 EGP
- For microcontrollers without an analog-to-digital converter or when you want a higher-precision ADC, the ADS1115 provides 16-bit precision at 860 samples/second over I2C. The chip can be configured as 4 single-ended input channels, or two differential channels. As a nice bonus, it even includes a programmable gain amplifier, up to x16, to help boost up smaller single/differential signals to the…
- Read more
-
-
- Out of Stock
- Converters
AMS1117 5V to 3.3V DC-DC Step-Down Power Supply Buck Module 800mA
- 11.00 EGP
- 3.3V DC-DC Step-Down Power Supply To 5V Buck Module AMS1117 Automatic Automatic Adjustable Boost Board Start Limit Voltage
- Read more
-
-
- Out of Stock
- Modules Accessories
Antenna Male Dual Band
- 27.50 EGP
- Antenna Male Dual Band
- Read more
-
-
- Audio, Modules
Audio Amplifier Board Module TDA2030
- 40.00 EGP
- The TDA2030 Audio Amplifier Module is a high-performance and reliable audio amplifier board, based on the popular TDA2030 integrated circuit. Known for its excellent sound quality and low distortion, this module is ideal for powering DIY audio projects, speaker systems, and home audio amplifiers.
- Add to cart
-
- Sale!
- Bluetooth
Bluetooth Module HC-05 Pinout, AT Commands & Arduino Programming
- Original price was: 235.00 EGP.200.00 EGPCurrent price is: 200.00 EGP.
- Very simple Bluetooth module to connect it with your microcontroller, Arduino, Raspberry Pi, or any MCU board using the TTL UART interface This serial bluetooth module can work as either master or slave. This module also includes the base board, not only the core board, most functions are pre-set, so only the serial port communication is available but it’s more easy to…
- Add to cart
-
- Out of Stock
- Bluetooth
Bluetooth V4.0
- 210.00 EGP
- Bluetooth 4.0 Module HM-10 Transparent Serial Port Module with Logic Level Conver Sion/Anti.
- Read more
-
-
- Sale!
- Converters
Boost Step-up Power Module High-voltage Generator DC 3V-6V to 400KV
- Original price was: 280.00 EGP.220.00 EGPCurrent price is: 220.00 EGP.
- DC 3V-6V to 400KV Boost Step-up Power Module Generator High-voltage Inverter High Voltage Transformer Compact Powerhouse for Electrifying Experiments
- Add to cart
-
- Out of Stock
- Wireless
CC1101 Wireless Module / 433M With Antenna
- 143.00 EGP
- CC1101 Wireless Module / 433M With Antenna
- Read more
-
-
- Converters
CP2102 USB 2.0 to TTL UART Serial Converter Module With DTR Pin
- 120.00 EGP
- The CP2102 USB to TTL Serial Converter Module is a compact and powerful interface designed for seamless USB-to-serial communication. Featuring the Silicon Labs CP2102 chipset, this module is ideal for flashing, debugging, and communicating with microcontrollers and other serial devices. Equipped with a DTR (Data Terminal Ready) pin, it supports automatic reset during programming, making it especially useful for flashing…
- Add to cart
-
- Out of Stock
- Converters
DC To DC Converter Input 48V Output 12V 20A
- 660.00 EGP
- DC To DC Converter Input 48V Output 12V 20A
- Read more
-
-
- Out of Stock
- Converters
DC-DC Adjustable Step-Down Power Supply Module -XL4005 5A 75W DSN5000
- 48.00 EGP
- XL4005 is a 300KHz fixed frequency PWM buck (step-down) DC/DC converter, capable of driving a 5A load with high efficiency, low ripple and excellent line and load regulation. Requiring a minimum number of external components, the regulator is simple to use and include internal frequency compensation and a fixed-frequency oscillator.
- Read more
-
-
- Out of Stock
- Converters
DC-DC Adjustable Voltage Buck Converter 5A with LED Display
- 110.00 EGP
- DC-DC Adjustable Voltage Buck Converter 5A with LED Display
- Read more
-
-
- Out of StockSale!
- Converters
DC-DC Boost Converter Voltage Step Up Module 150W 6A
- Original price was: 195.00 EGP.150.00 EGPCurrent price is: 150.00 EGP.
- Boost your DC power efficiently with the DC-DC Boost Converter 150W 6A. This compact, high-performance module delivers up to 150W of power with an adjustable output voltage from 6V to 35V, supporting currents up to 6A. Featuring over-current, over-voltage, and short-circuit protection, it ensures safe and reliable operation for LED lighting, battery-powered projects, solar systems, robotics, and DIY electronics. Perfect…
- Read more
-
-
- Out of Stock
- Converters
DC-DC Step Up Down Buck-Boost Voltage Converter Module LM2577 LM2596
- 110.00 EGP
- DC-DC Step Up Down Buck-Boost Voltage Converter Module LM2577 LM2596
- Read more
-
-
- Converters
DC-DC Step-Down Mini 360 Buck Converter
- 40.00 EGP
- Super compact and capable, this DC-DC buck converter can knock down a voltage from 23V to as low as 1V with up to 95% efficiency.
- Add to cart
-
- Converters
DC-DC USB Boost Step-up Converter 0.9V-5V to 5V
- 40.00 EGP
- Transform low-voltage power sources into stable 5V USB output with this compact boost converter, perfect for emergency charging, DIY projects, and battery-powered devices. Ideal for squeezing every last drop of energy from single-cell batteries (AA/AAA) or weak solar panels!
- Add to cart
-
- Out of Stock
- Ethernet
ENC28J60 Ethernet Network Module
- 121.00 EGP
- ENC28J60 Ethernet Network Module
- Read more
-
-
- Out of Stock
- Ethernet
ENC28J60 Ethernet Network Module Mini Board
- 121.00 EGP
- ENC28J60 Ethernet LAN Network Module for Arduino 51 AVR LPC
- Read more
-
-
- Out of Stock
- Wireless
ESP-07 ESP8266 UART Serial To Wifi Module For Arduino, Raspberry Pi
- 66.00 EGP
- ESP8266 ESP-07 Serial Wi-Fi Wireless Module is a new player in this field. It’s tiny (25mm x 15mm), with simple pin connections, using serial TX/RX to send and receive Ethernet buffers, and similarly, using serial commands to query and change configurations of the Wi-Fi module. This is quite convenient as it only requires two wires (TX/RX) to communicate between a…
- Read more
-
-
- Sale!
- Wireless
ESP8266 ESP-01S WiFi Serial Transceiver Module
- Original price was: 150.00 EGP.125.00 EGPCurrent price is: 125.00 EGP.
- WiFi ESP8266 Serial TTL Module ESP-01S is a compact and powerful WiFi module that integrates the popular ESP8266EX chip. Designed for IoT (Internet of Things) projects, this module enables wireless communication with ease, offering a simple and cost-effective solution for connecting your devices to a WiFi network.
- Add to cart
-
- Out of Stock
- Wireless
ESP8266 ESP-04 Wifi Transceiver Wireless Module
- 66.00 EGP
- ESP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor.
- Read more
-
-
- Out of Stock
- Wireless
ESP8266 ESP-12F Wifi Transceiver Wireless Module
- 170.00 EGP
- The Latest ESP-12F ESP8266 Wi-Fi Module AP & Station Remote Serial Wireless IoT Board is an integrated chip designed for the needs of a new connected world. It can handle all the necessary overhead for communicating with your network, such as TCP/IP stack and communicating with your 802.11 networks. It is completely addressable over SPI and UART protocols allowing you…
- Read more
-
-
- Wireless
ESP8266 WiFi 5V 1 Channel Relay Module
- 220.00 EGP
- The ESP8266 WiFi 5V 1-Channel Relay Module combines an ESP-01S WiFi module with a 5V relay, enabling wireless control of high-voltage devices (up to 250V AC/30V DC) via WiFi (TCP/IP). Perfect for smart home automation, IoT projects, and remote switching, this compact module allows you to control lights, appliances, motors, and more from anywhere using a smartphone, web browser, or voice assistant (Alexa/Google Home). With easy Arduino/NodeMCU programming and low-power operation, this module…
- Add to cart
-
- Out of Stock
- Wireless
ESP8266 Wifi Transceiver Module ESP03
- 66.00 EGP
- ESP8266 Small transceiver module Wi-Fi-based chip, compatible with standard 802.11 b / g / n 2.4 GHz, has SPI interface, 7 GPIO, TCP / IP stack and antenna ceramic PCB. Ideal for wireless sensor networks, home automation, building automation, and custom applications. Power: 3.3 Vdc, dimensions (mm): 17.4 x 12.2.
- Read more
-
-
- Sale!
- Wireless
ESP8266-12E WiFi Serial TTL Module
- Original price was: 160.00 EGP.140.00 EGPCurrent price is: 140.00 EGP.
- The ESP8266-12E WiFi Serial TTL Module is a compact and cost-effective solution for IoT, smart home, and wireless communication projects. Built around the powerful ESP8266EX SoC, this module combines a 32-bit microcontroller, integrated Wi-Fi (802.11 b/g/n), and a full TCP/IP stack in one small board.
- Add to cart
-
- Wireless
FST/CZS 433Mhz Wireless Transmitter Module
- 40.00 EGP
- The HC-12 FST/CZS is a reliable 433MHz wireless serial communication module designed for long-range, low-power wireless data transmission. It supports transparent serial communication, making it easy to integrate with microcontrollers such as Arduino, Raspberry Pi, and other embedded systems for wireless data exchange. Ideal for IoT projects, remote controls, and telemetry applications, the HC-12 module can achieve communication distances up…
- Add to cart
-
- Out of Stock
- Converters
FT232Rl FTDI
- 105.00 EGP
- FT232Rl FTDI
- Read more
-
-
- Out of Stock
- Modules Accessories
GPS Antenna
- 154.00 EGP
- GPS Antenna
- Read more
-
-
- Out of Stock
- Modules, Other Modules
Grove reader Recognition Fingerprint Module R307
- 900.00 EGP
- Grove R307 Fingerprint Module – high-accuracy biometric recognition sensor for Arduino, Raspberry Pi, and IoT projects. Ideal for access control, smart locks, and attendance systems.
- Read more
-
-
- Other Modules
GY-271 HMC5883L Compass Magnetometer Module
- 145.00 EGP
- The GY-271 is a compact, high-performance 3-axis digital compass module based on the HMC5883L magnetometer chip from Honeywell. Designed to measure magnetic fields along the X, Y, and Z axes, this module provides accurate heading information, making it ideal for use in robotics, navigation systems, drones, and mobile devices. With its I2C communication interface and easy integration with microcontrollers such…
- Add to cart
-
- Out of Stock
- Other Modules
GY-291 ADXL345 3-Axis Accelerometer
- 60.50 EGP
- GY-291 ADXL345 3-Axis is a small and efficient sensor with a high resolution (13-bit) that can measure an acceleration of up to ± 16g. The module can be accessed via the I2C or SPI protocol and can be supplied with a voltage between 3V and 5V.
- Read more
-
-
- Other Modules
GY-45 MMA845 3-Axis Accelerometer Module
- 100.00 EGP
- The MMA8452 is a smart low-power, three-axis accelerometer with 12 bits of resolution. This accelerometer is packed with embedded functions with flexible user programmable options, configurable to two interrupt pins. The MMA8452 has user selectable full scales of ±2g/±4g/±8g. The device can be configured to generate inertial wake-up interrupt signals allowing the MMA8452 to monitor events and remain in a…
- Add to cart
-
- Sale!
- Other Modules
GY-521 MPU6050 Triple 3-Axis Accelerometer Gyroscope I2C
- Original price was: 150.00 EGP.125.00 EGPCurrent price is: 125.00 EGP.
- The GY-521 module is a compact and powerful sensor board based on the MPU6050 chip, which combines a 3-axis accelerometer and a 3-axis gyroscope in a single package. This module is ideal for motion tracking, gesture detection, and stabilization in a wide range of applications including robotics, drones, gaming, and wearable tech.
- Add to cart
-
- Out of Stock
- Other Modules
GY-61 DXL335 3-Axis Accelerometer Module
- 180.00 EGP
- GY-61 ADXL335 Module is a small, thin, low-power, complete 3-axis accelerometer with signal conditioned voltage outputs. The ADXL335 Module 3-axis Analog Output Accelerometer measures acceleration with a minimum full-scale range of ±3 g. It can measure the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion, shock, or vibration. This breakout board comes with…
- Read more
-
-
- Out of Stock
- Other Modules
GY-65 BMP085 Atmospheric Pressure Altimeter Module
- 72.00 EGP
- GY-65 BMP085 is a high precision, ultra-low power consumption pressure sensors, can be applied to mobile devices. Its performance, the absolute accuracy of the minimum can reach 0.03hPa, and very low power consumption, only 3A. BMP085 powerful 8-pin ceramic-lead chip carrier (LCC) ultra-thin package, through the I2C bus can be connected directly with a variety of microprocessor.
- Read more
-
-
- Out of Stock
- Other Modules
GY-88 IMU 10DOF MPU6050 + HMC5883L + BMP085
- 220.00 EGP
- This IMU 10DOF is a motion tracking module. Its design is based on the sensor MPU6050,HMC5883L and BMP085. The sensor MPU6050 which is the world’s first integrated 6-axis Motion Tracking device, that combines a 3-axis gyroscope, 3-axis accelerometer, and a Digital Motion Processor (DMP). The Honeywell’s HMC5883L which is a 3-axis digital compass. The BMP085 is a high-accuracy chip to…
- Read more
-
-
- Out of Stock
- Converters
Hi Link AC-DC Module 220Vac to 12Vdc “HLK-PM12”
- 88.00 EGP
- HLK-PM12 is a ultra-compact power module. It is designed to meet the requirements of EMC and Safety Test. It can use in IOT project, Smart home and so on.
- Read more
-
-
- Out of Stock
- Converters
Hi Link AC-DC Module 220Vac to 3.3Vdc “HLK-PM03”
- 88.00 EGP
- Hi Link AC-DC Module 220Vac to 3.3Vdc "HLK-PM03" AC-DC 220V To 3.3Visolating Switch Power Supply Module/ Step-Down Module Output Overload And Short Circuit Protection Low Power Consumption, Environmental Protection, No-Load Loss <0.1W The Product Is Designed to Meet the Requirements of EMC And Safety Test It can use in IOT project, Smart home and so on.
- Read more
-
-
- Out of Stock
- Converters
Hi Link AC-DC Module 220Vac to 5Vdc “HLK-PM01”
- 88.00 EGP
- HLK-PM01 is a ultra-compact power module. It is designed to meet the requirements of EMC and Safety Test. It can use in IOT project, Smart home and so on.
- Read more
-
-
- Other Modules
High-power MOSFET Trigger Switch Drive Module
- 40.00 EGP
- High-power MOSFET Trigger Switch Drive Module
- Add to cart
-
- Out of Stock
- Converters
HX711 Weighing Scale Analog to Digital Converter 24 bit
- 55.00 EGP
- The Load Cell Amplifier and ADC (Analog-to-Digital Converter) Module is a small breakout board for the HX711 IC that allows you to easily read load cells to measure weight. By connecting the module to your microcontroller you will be able to read the changes in the resistance of the load cell and with some calibration you’ll be able to get very accurate weight…
- Read more
-
-
- Other Modules
I2C Arduino Serial Module For LCD 16*2
- 40.00 EGP
- Simplify your LCD connections with this I2C serial interface module, designed specifically for standard 16x2 character LCD displays. This compact adapter converts the LCD's parallel interface into a simple I2C (I²C) 4-wire connection, drastically reducing wiring complexity and saving precious GPIO pins on your microcontroller.
- Add to cart
-
- Out of Stock
- Other Modules
IRF520 MOSFET Driver Module
- 27.50 EGP
- IRF520 MOSFET Driver Module
- Read more
-
-
- Out of Stock
- Audio
ISD1820 Recording And Playback Module 10 Seconds
- 83.00 EGP
- This ISD1820 Voice Recorder/Playback Module reproduces high-quality, natural voice and audio from the recorded audio by Mic or driven through Microcontroller. Because of its dual operation mode (Standalone and Microcontroller driven), we can easily use this as per requirement and with a slight change of the onboard resistor, we can get flexibility in the sampling frequency of the recording duration…
- Read more
-
-
- Other Modules
Joystick Module X-Y For Arduino
- 28.00 EGP
- Lots of robotic projects need a joystick. This module offers an affordable solution to that. The Joystick module is similar to analog joysticks found in gamepads. It is made by mounting two potentiometers at a 90 degrees angle. The potentiometers are connected to a short stick centered by springs.
- Add to cart
-
- Out of Stock
- Other Modules
Lipo Battery Voltage Tester / Low Voltage Buzzer Alarm
- 55.00 EGP
- LIPO Battery Voltage Tester and low voltage buzzer alarm combo is easy to use. Li-Po Battery Voltage Buzzer Indicator: directly plug it into your operating battery, it will monitor the conditions of your battery all the time, so your batteries shall remain within safe operating voltage range at all times.
- Read more
-
-
- Out of Stock
- Converters
LM2577 2.5A DC-DC Step UP LED Voltmeter 3-34 to 4-35V Adjustable Boost Converter module
- 77.00 EGP
- The LM2577 2.5A DC-DC Step UP LED Voltmeter 3-34 to 4-35V Adjustable Boost Converter module is a 150 KHz fixed frequency PWM buck (step-down) DC/DC module. Requiring a minimum number of external components, these regulators are cost-effective, and simple to use.
- Read more
-
-
- Out of Stock
- Converters
LM2577 DC – DC Converter Step-Up 2.5A
- 80.00 EGP
- LM2577 DC - DC Converter Step-Up 2.5A
- Read more
-
-
- Converters
LM2596S DC-DC Step-Down Adjustable Converter 3A
- 65.00 EGP
- LM2596S DC-DC 4.5-40V adjustable Step-Down Power Supply Module
- Add to cart
-
- Converters
LM317 DC-DC Step Down Converter Module
- 30.00 EGP
- The LM317 DC-DC Step Down Converter Module is a versatile adjustable linear voltage regulator that converts higher DC input voltages (4V-40V) into a stable, lower output voltage (1.25V-37V) with a maximum current of 1.5A. Unlike switching buck converters, the LM317 provides low-noise, ripple-free output, making it ideal for sensitive analog circuits, audio amplifiers, and precision electronics where clean power is essential.
- Add to cart
-
- Audio
LM386 Audio Amplifier Module (200 Times Gain Audio Amplifier)
- 40.00 EGP
- The LM386 Audio Amplifier Module is a compact, high-performance amplifier board designed to boost low-power audio signals with up to 200x gain. Based on the popular LM386 IC, this module is perfect for DIY audio projects, portable speakers, intercoms, and other sound amplification applications. With its simple design and easy-to-use interface, this amplifier module delivers clear, distortion-free sound while operating on a low-voltage power…
- Add to cart
-
- Out of Stock
- Converters
Logic Level Converter Bi-Directional
- 45.00 EGP
- I2C Logic Level Converter Bi-Directional Module 5V to 3.3V
- Read more
-
-
- Converters
MAX485 TTL To RS485 Converter Module
- 60.00 EGP
- 5V MAX485 TTL To RS485 Converter Module Board For Arduino
- Add to cart
-
- Out of Stock
- Other Modules
MAX6675 Module for Thermocouple K Type
- 110.00 EGP
- Read more
-
-
- Other Modules
MCP2515 CAN Bus Module Board TJA1050 Receiver SPI For 51 MCU
- 210.00 EGP
- The MCP2515 Module adopts CAN controller MCP2515, and TJA1050 high-speed CAN transceiver. Microchip MCP2515 independent CAN protocol controller, support CAN V2.0B regulation. The connection between MCP2515 and MCU is through SPI.
- Add to cart
-
- Sale!
- Other Modules
MCR12 Barcode Reader / Scanner Module
- Original price was: 1,000.00 EGP.700.00 EGPCurrent price is: 700.00 EGP.
- Decode nearly any kind of 1D (striped) barcode in your project using this adorable compact barcode scanner. We've looked all over for a small, light, low-power module that can be easily integrated. This OEM scanner has a little camera inside that takes 100 photos per second, instead of using a 'scanning mirror' assembly. This means its less likely to get…
- Add to cart
-
- Out of Stock
- Other Modules
Micro SD Card Module
- 50.00 EGP
- Micro SD card mini TF card reader module SPI interfaces with level converter chip
- Read more
-
-
- Audio
Mini MP3 Player Module ( MP3-TF-16P ) original ICs
- 165.00 EGP
- The MP3-TF-16P Mini MP3 Player Module is a compact, high-quality audio playback solution designed for embedded systems, DIY projects, and commercial applications. Built with original ICs for reliable performance, this module supports MP3/WAV/WMA playback from microSD cards with simple serial control.
- Add to cart
-
- Converters
MT3608 2A DC-DC Step Up Boost Converter Module
- 40.00 EGP
- The MT3608 Step-Up Converter Module is a compact and efficient DC-DC boost module designed to step up lower DC voltages to higher levels with high efficiency. Powered by the MT3608 IC, this module is perfect for portable electronics, DIY power supplies, and battery-powered projects.
- Add to cart
-
- Other Modules
NE555 Adjustable Frequency Pulse Generator Module
- 30.00 EGP
- This NE555-based pulse generator module is a versatile and easy-to-use signal source capable of producing adjustable-frequency square waves for timing, PWM, tone generation, and motor control. With onboard potentiometers for fine-tuning, it’s perfect for prototyping, testing, and educational projects.
- Add to cart
-
- Out of Stock
- Wireless
NRF24L01 + 2.4G Wireless with 3.3V Voltage Regulator Breakout Adapter
- NRF24L01 2.4G Wireless with 3.3V Voltage Regulator Breakout Adapter
- Read more
-
-
- Wireless
Nrf24L01+Pa+Lna 1KM Distance Wireless Transceiver (2DB Antenna)
- 350.00 EGP
- The nRF24L01+ PA + LNA is an enhanced wireless transceiver module based on the popular nRF24L01+ chipset, designed to provide long-range, reliable wireless communication up to 1 kilometer in open areas. Equipped with a Power Amplifier (PA) and Low Noise Amplifier (LNA) along with a 2dB antenna, this module delivers superior transmission power and reception sensitivity compared to the standard…
- Add to cart
-
- Wireless
NRF905 Wireless Transmission Module with Antenna
- 250.00 EGP
- The NRF905 is a high-performance RF module operating at 433MHz, designed for low-power, long-range wireless communication between microcontrollers (Arduino, STM32, ESP8266). With SPI interface and configurable channels, it’s ideal for remote sensors, IoT, and wireless control systems.
- Add to cart
-
- Out of Stock
- Converters
OTG Type-C to USB 2.0 Converter
- 25.00 EGP
- Read more
-
-
- Audio
PAM8403 5V Two-channel Stereo Mini Class-D 3W+3W Audio Amplifier
- 20.00 EGP
- The PAM8403 is a high-efficiency, low-noise, and compact Class-D audio amplifier module capable of delivering 3W + 3W stereo output power. It operates on a 5V DC power supply and is ideal for DIY audio projects, portable speaker systems, and embedded electronics applications where space and power efficiency are critical.
- Add to cart
-
- Other Modules
Photosenstive Diode Module
- 27.50 EGP
- Photosenstive diode module is the most sensitive for environmental light intensity, generally used for detecting the ambient brightness and intensity. In most of the cases with photosenstive resistance sensor module universal, it is difference that is the photosensitive diode module directional well and can sense the fixed direction of light source
- Add to cart
-
- Converters
PL2303 USB TTL Converter Module
- 55.00 EGP
- The PL2303 USB to TTL Converter Module is a high-performance USB-to-serial adapter designed for debugging, programming, and communication between computers and microcontrollers or embedded systems. It is widely used for Arduino, Raspberry Pi, ESP8266, STM32, and other microcontroller projects.
- Add to cart
-
- Modules Accessories
Plastic RFID Tag (13.56 Mhz)
- 10.00 EGP
- Plastic RFID Tag (13.56 MHz) — durable, customizable HF/NFC tag for access control, asset tracking, attendance, and contactless applications. Multiple chip types and printing options available.
- Add to cart
-
- Sale!
- Wireless
Radio TLG10UA03 WiFi To TTL-UART Module
- Original price was: 220.00 EGP.200.00 EGPCurrent price is: 200.00 EGP.
- The TLG10UA03 is a compact and efficient WiFi to TTL-UART bridge module, designed for seamless wireless communication between microcontrollers (like Arduino, ESP, STM32) and WiFi networks. It enables bidirectional data transmission over WiFi, making it ideal for IoT, smart home automation, remote monitoring, and wireless control applications.
- Add to cart
-
- Out of Stock
- Wireless
Ralink RT3070 USB Wifi Module 150M
- 350.00 EGP
- Ralink RT3070 USB Wifi Module 150M
- Read more
-
-
- Wireless
RDM6300 RFID Reader Module – 125KHZ
- 175.00 EGP
- The RDM6300 is a compact 125kHz RFID reader module designed for contactless identification of EM4100, TK4100, and FDX-B compatible tags. With UART (TTL) output, it’s perfect for access control, attendance tracking, and DIY security systems.
- Add to cart
-
- Clock & Timer Module
Real Time Clock Module (RTC) DS1307
- 45.00 EGP
- The DS1307 RTC Module is a widely used real-time clock module that provides timekeeping functions including seconds, minutes, hours, day, date, month, and year – all via a simple I2C interface. It's ideal for Arduino, Raspberry Pi, and other microcontroller projects that need accurate time tracking, even when the main system is powered off. With a backup CR2032 battery (not…
- Add to cart
-
- Other Modules
Reed Switch Module
- 35.00 EGP
- Reed switch is a kind of passive electronic switching component with contacts with a simple structure, small size and easy to control. It consists of a sealed glass envelope where there are two ferrous elastic reeds and is filled with inert gas called rhodium
- Add to cart
-
- Sale!
- Other Modules
Relay Module (5V-10A) 1Channel Low level trigger
- Original price was: 35.00 EGP.30.00 EGPCurrent price is: 30.00 EGP.
- This 5V 10A Relay Module is a simple yet powerful solution for controlling high-voltage devices with low-voltage microcontroller signals. Featuring a single channel relay with low-level trigger input, it allows you to switch loads up to 10A safely and efficiently.
- Add to cart
-
- Out of Stock
- Other Modules
Relay Module 16 Channel 5V
- 231.00 EGP
- Relay Module 16 Channel 5V
- Read more
-
-
- Out of Stock
- Other Modules
Relay Module 2 Channel 5V (high/low) level trigger
- 80.00 EGP
- This versatile 2-Channel 5V Relay Module allows you to control two independent high-voltage devices using low-voltage signals from microcontrollers like Arduino, Raspberry Pi, ESP32, and more. It supports both high-level and low-level trigger modes, making it compatible with a wide range of control circuits.
- Read more
-
-
- Other Modules
Relay Module 8 Channel 5V
- 240.00 EGP
- The 8-Channel 5V Relay Module is a versatile switching board that allows microcontrollers (like Arduino, ESP8266, or Raspberry Pi) to control high-voltage/high-current devices (up to 10A 250V AC or 10A 30V DC per channel). It’s ideal for home automation, industrial control, and IoT projects requiring multiple electrical load controls.
- Add to cart
-
- Out of Stock
- Wireless
RF4432Se Si4432 433Mhz Wireless Rf Transceiver Module
- 132.00 EGP
- This LoRa (Long Range) Module uses the Silicon Labs' Si4432 wireless transceiver chip. It is a complete, compact, low-power wireless transceiver module. Silicon Labs' EZRadioPRO Series SI44322009 works in the range of 433MHZ band, and the maximum output power up to 20 DBm which can reach a range of kilometers. The module integrates all RF related functions and devices and offers reliable…
- Read more
-
-
- Out of Stock
- Modules Accessories
RFID Card 13.56MHz
- 16.50 EGP
- RFID Card 13.56MHz
- Read more
-
-
- Out of Stock
- Modules, Other Modules
Rgb Led Module
- 10.00 EGP
- RGB LED is a light emitting diode that displays just about any color by manipulating the intensities of either the Red, the Green or the Blue LED.
- Read more
-
-
- Sale!
- Wireless
RN-XV Wifly Bee RN-171 XV Wire Antenna
- Original price was: 450.00 EGP.300.00 EGPCurrent price is: 300.00 EGP.
- The RN-XV WiFly (RN-171-XV) is a self-contained, low-power Wi-Fi module featuring a wire antenna and UART interface, designed for wireless sensor networks, remote monitoring, and IoT applications. With 802.11 b/g compatibility and TCP/IP stack onboard, it simplifies Wi-Fi connectivity for microcontrollers.
- Add to cart
-
- Out of Stock
- Converters
RS232 to TTL Converter (Max232)
- 40.00 EGP
- The RS232 To TTL Converter Module is widely used in radio modifications, cell phone Flash, XBOX360 Flash detection, GPS, car, DVD Flash, HDD repair, set-top box upgrade.
- Read more
-
-
- Sale!
- Clock & Timer Module
RTC DS3231 I2C High Precision Real Time Clock Module
- Original price was: 145.00 EGP.125.00 EGPCurrent price is: 125.00 EGP.
- The DS3231 RTC (Real-Time Clock) Module is a highly accurate and reliable timekeeping module designed for microcontroller-based systems like Arduino, Raspberry Pi, ESP32, and more. Powered via I2C communication, this module maintains time even during power interruptions (external battery required, not included in this version). Using the DS3231 chip, it offers superior accuracy compared to other RTCs (like the DS1307),…
- Add to cart
-
- Out of Stock
- Other Modules
SD Card Module, SPI Interface
- 55.00 EGP
- This is a wonderful little Arduino to SD card interface module.Through programming, you can read and write to the SD card using your arduino.If you are feeling adventurous, this is truly an interesting board to work with and learn from.It is easily interfaced as a peripheral to your arduino sensor shield module.
- Read more
-
-
- Out of Stock
- Wireless
Sim 900 A-Mini Board
- 385.00 EGP
- Sim 900 A Mini Module is a breakout board that has feature of complete dual band GSM/GPRS module which is specially designed for small market areas for cost effective solutions. It has Quad-Band of 850/ 900/ 1800/ 1900 MHz and Dual-Band of 900/1900 MHZ. It has useful performance for voice, SMS, Data and Fax in a small form factor.
- Read more
-
-
- Out of Stock
- Wireless
SIM800L V2.2 GPRS GSM Module with MicroSIM Card Port and PCB Anttena
- 660.00 EGP
- SIM800L V2.2 GPRS GSM Module with MicroSIM Card Port and PCB Anttena
- Read more
-
-
- Sale!
- Modules, Wireless
SIM900-TE-C GSM GPRS Module
- Original price was: 800.00 EGP.500.00 EGPCurrent price is: 500.00 EGP.
- The SIM900-TE-C is a compact and versatile GSM/GPRS module designed for seamless wireless communication in IoT, M2M (Machine-to-Machine), and embedded applications. Built on the reliable SIM900 platform, this module delivers robust GSM/GPRS connectivity with low power consumption, making it ideal for remote monitoring, tracking, smart devices, and industrial automation.
- Add to cart
-
- Other Modules
Single Channel 5V DC Relay Module Solid State Low Level Trigger
- 70.00 EGP
- This Single-Channel 5V DC Solid State Relay (SSR) Module provides silent, fast-switching control for AC/DC loads using a low-level (0V) trigger signal from microcontrollers like Arduino, ESP8266, or Raspberry Pi. Unlike mechanical relays, this SSR has no moving parts, ensuring longer lifespan, zero noise, and no contact sparking. Perfect for high-speed switching applications, such as temperature controllers, LED lighting, and small appliances, this module supports DC control (5V) and AC/DC load…
- Add to cart
-
- Out of Stock
- Modules Accessories
Sma Male Straight Antenna 5cm 433MHz
- 27.50 EGP
- Sma Male Straight Antenna 5cm 433MHz
- Read more
-
-
- Converters
Sunfounder AD/DA Converter PCF8591
- 450.00 EGP
- The PCF8591 is a single-chip, single-supply and low-power 8-bit CMOS data acquisition device with four analog inputs, one analog output and a serial I2C-bus interface. Three address pins A0, A1 and A2 are used for programming the hardware address, allowing maximum of eight devices connected to the I2C-bus without additional hardware. Address, control and data to and from the device…
- Add to cart
-
- Out of Stock
- Audio
TDA7388 Power Amplifiers Four Channel 4x41W Audio DC 12V BTL PC Car AMP PCB
- 225.00 EGP
- TDA7388 Power Amplifiers
- Read more
-
-
- Out of Stock
- Audio
TDA8932 Digital Amplifier Board Mono 35W Low Power Stereo Amplifier Module
- 99.00 EGP
- The board uses a high-performance digital TDA8932 chip, high efficiency, high power, high-quality sound, without additional installation of heat sink, very suitable for the transformation of active speakers, electro-acoustic project implementation, product development and other audio applications.
- Read more
-
-
- Audio
TF/U Disk MP3 Format Decoder Board Amplifier Module
- 150.00 EGP
- TF/U Disk MP3 Format Decoder Board Amplifier Module
- Add to cart
-
- Sale!
- Wireless
Uart Wifi Module With Ceramic Antenna Hlk-Rm04
- Original price was: 300.00 EGP.200.00 EGPCurrent price is: 200.00 EGP.
- The HLK-RM04 is an embedded UART-to-WiFi module that enables wireless serial communication (TCP/IP) for IoT, smart home, and industrial automation projects. It features a built-in ceramic antenna, supports 802.11 b/g/n (2.4GHz), and operates in AP, STA, or AP+STA modes, making it ideal for connecting microcontrollers (Arduino, STM32) to WiFi networks. Developed by Hi-Link, this compact module is firmware-configurable via AT commands or web interface, offering a reliable wireless bridge for serial devices.
- Add to cart
-
- Wireless
Wireless Charger Module Power Supply Coil 5V 2A
- 380.00 EGP
- This 5V 2A Wireless Charger Module is a compact, Qi-compatible power transmitter designed for DIY wireless charging projects. It includes a transmitter coil and control circuit, allowing you to wirelessly charge Qi-enabled devices (smartphones, earbuds, smartwatches) with 5V/2A input power. Perfect for custom charging pads, embedded projects, or IoT devices, this module supports foreign object detection (FOD) and overcurrent/overvoltage protection for safe charging.
- Add to cart
-
- Wireless
Wireless Rf Transceiver Modules HR-1022
- 440.00 EGP
- Wireless Rf Transceiver Modules HR-1022 Wireless RF Transceiver Module with the low-power wireless transceiver data module is used as the wireless data transceiver in long range
- Add to cart
-
- Out of Stock
- Audio
WTV020-020 Audio Playback SD Module
- 77.00 EGP
- Embedding audio playback in your electronics project has never been easier. This module plays audio files from the SD card and you can control the playback using a simple serial interface.
- Read more
-
-
- Out of Stock
- Wireless
Xbee 2Mw 120M
- 330.00 EGP
- xbee XB24-Z7WIT-004 module from Digi. Series 2 improves on the power output and data protocol. Series 2 modules allow you to create complex mesh networks based on the Xbee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.…
- Read more
-
-
- Out of StockSale!
- Wireless
Xbee 5V/3.3V Adapter Board
- Original price was: 220.00 EGP.190.00 EGPCurrent price is: 190.00 EGP.
- This low cost XBee 3.3-5V Adapter Board comes in partially assembled kit form and provides a cost-effective solution for interfacing your microcontroller to any XBee or XBee Pro module (see Associated Modules below). A voltage regulator and 74LVC244A buffer is included onboard for safe interfacing to a 5 V supply, allowing for easy compatibility with any Parallax microcontroller.
- Read more
-
-
- Sale!
- Wireless
Xbee Adapter With Mini Port And USB Cable
- Original price was: 110.00 EGP.90.00 EGPCurrent price is: 90.00 EGP.
- Enhance your wireless communication projects with our XBee Adapter with Mini Port and USB Cable, a versatile and essential tool for developers, engineers, and hobbyists working with XBee modules. This adapter provides seamless connectivity between your XBee device and a computer, enabling easy configuration, programming, and debugging.
- Add to cart
-
- Out of Stock
- Chargers
XH-M603 Charging Control Module 12-24V Battery
- 137.50 EGP
- XH-M603 Charging Control Module Digital LED Display Storage Lithium Battery Charger Control Switch Protection Board 12-24V
- Read more
-
