-
- Out of Stock
- Other Modules
1.2v 12v ZB2L3 18650 Li-ion Lithium Battery Capacity Tester + Resistance Lead-acid Battery Capacity Meter Discharge Tester
- 140.00 EGP
- This circuit in order to improve the voltage measurement accuracy, specially designed DC bias, when the terminal is what all don't pick will display a small voltage, does not affect the actual measurement, if you are short connected with the input terminal (absolute 0V) will display 0. To understand the principle can consult the superposition theorem in electrical engineering.
- Read more
-
-
- Other Modules
1.75mm Filament Detection Sensor Module
- 110.00 EGP
- The 1.75mm Filament Detection Sensor Module is a mechanical end-stop switch designed for 3D printers to detect filament presence or jams. When filament runs out or breaks, the sensor triggers a low/high signal to pause printing, preventing failed prints. This module is compatible with most 3D printer boards (Creality, Prusa, RAMPS) and supports Marlin/Klipper firmware configurations.
- Add to cart
-
- Out of Stock
- Other Modules
12V Battery Level LED Indicator
- 45.00 EGP
- XD-82B 12V Battery Level Indicator Module 4 Paragraph 4 onboard Battery Indicator LED Lights. Monitor the level of your 12v battery and know when it’s running low with this small LED battery level indicator.
- Read more
-
-
- Out of Stock
- Other Modules
12V Delay Timer Switch Adjustable
- 45.00 EGP
- This 12V Delay Timer Switch Adjustable 0-10sec is one kind of popular switch module. You can use it control any devices on or off. This is a DC12V controlled 1 channel timer relay module. It has a NE555 timer chip on the board. You can adjust delay time(0-10s) by rotating the potentiometer. When this relay get powered it will delay…
- Read more
-
-
- Out of Stock
- Other Modules
16 Channel Analog Multiplexer
- 38.50 EGP
- Multiplexer Module is a micro chip that requires 1 Analog Pin and 2 to 4 Digital Pins to allow the micro controller to monitor more Analog Pins for sensor readings. The requirement of 1 Analog Pin is actually the output pin shared among all the extension Analog Pins. The module only allow 1 Analog channel or sensor value to be connected to…
- Read more
-
-
- Other Modules
2 Channel 5V DC Relay Module Solid State Low Level trigger
- 175.00 EGP
- This 2-Channel 5V DC Solid State Relay (SSR) Module provides a fast, silent, and durable switching solution for low-power DC applications. Unlike mechanical relays, this solid-state module has no moving parts, ensuring longer lifespan, noiseless operation, and faster response times. Perfect for automation, IoT projects, and electronic control systems where reliability is key.
- Add to cart
-
- Other Modules
3 Axis Digital Gyroscope Sensor Module GY-50 L3G4200
- 125.00 EGP
- The GY-50 (L3G4200D) 3-Axis Digital Gyroscope Module is a high-performance MEMS gyroscope that measures angular velocity (degrees per second) around the X, Y, and Z axes. With a selectable scale range (±250°/s to ±2000°/s) and I2C/SPI interface, it’s ideal for drones, robotics, stabilization systems, and motion tracking. This module features low noise, high stability, and built-in temperature compensation, making it suitable for both hobbyist and industrial applications.
- Add to cart
-
- Out of Stock
- Other Modules
3D Printer Mechanical End Stop Switch Module
- 35.00 EGP
- 3D Printer Mechanical End Stop Switch Module is a Mechanical End stop kit or 3D Printers or CNC machines.
- Read more
-
-
- Sale!
- Other Modules
3D Printer Optical End Stop Switch Module For RAMPS
- Original price was: 50.00 EGP.35.00 EGPCurrent price is: 35.00 EGP.
- Upgrade your 3D printer’s precision with the Optical Endstop Switch Module, a high-accuracy, non-contact limit switch designed for RAMPS 1.4, RepRap, and other 3D printer control boards. Unlike mechanical endstops, this optical sensor eliminates physical wear, providing longer lifespan and more reliable homing performance.
- Add to cart
-
- Modules, Other Modules
4 Channel 5V Relay Module Board Shield for Arduino
- 275.00 EGP
- 4 Channel 5V Relay Module Board Shield for Arduino This 5V 4 Relay Shield Module is a small current signal control power equipment commonly used electronic module Enabling high-power single-chip control devices are widely used in SCM system to make smart home project Can be directly plugged into the compatible the use of various types of motherboards, eliminating the patch…
- Add to cart
-
- Other Modules
4 Output Relay Module Works on 5V Signal
- 150.00 EGP
- This 4-Channel 5V Relay Module allows you to control high-voltage AC/DC devices (up to 250V AC / 30V DC @ 10A per channel) using a low-voltage 5V signal from microcontrollers like Arduino, ESP8266, Raspberry Pi, or PLCs. Each relay is optically isolated (optocoupler-protected), preventing back EMF damage to your control circuit. Perfect for home automation, industrial control, and IoT projects, this module supports both HIGH and LOW-level triggering (configurable via…
- Add to cart
-
- Out of Stock
- Other Modules
ADS1115 16-Bit ADC – 4 Channel with Programmable Gain Amplifier
- 95.00 EGP
- For microcontrollers without an analog-to-digital converter or when you want a higher-precision ADC, the ADS1115 provides 16-bit precision at 860 samples/second over I2C. The chip can be configured as 4 single-ended input channels, or two differential channels. As a nice bonus, it even includes a programmable gain amplifier, up to x16, to help boost up smaller single/differential signals to the…
- Read more
-
-
- Ethernet, Modules, Other Modules, Wireless
Ai-Thinker A9G GSM/GPRS+GPS/BDS Development Board
- 1,700.00 EGP
- ORIGINAL AI-THINKER A9G GSM/GPRS GPS/BDS DEVELOPMENT BOARD SMS VOICE WIRELESS DATA TRANSMISSION POSITIONING
- Add to cart
-
- Out of Stock
- Modules, Other Modules
BMP280 Barometric Pressure and Altitude Sensor I2C/SPI Module
- 60.00 EGP
- DESCRIPTION Now we’ve got a high-precision environmental sensor at even lower cost, Barometer Sensor(BMP280). It is based on their new BMP280 sensor, which is an upgraded version of the old BMP180 Barometer Sensor (BMP180). The module provides precise measurement of barometric pressure and temperature in the environment. The air pressure can be measured in a range from 300 hPa to…
- Read more
-
-
- Out of Stock
- Other Modules
CH376S U Disk Read Write Module For USB Control Transfer
- 110.00 EGP
- CH376 is common a USB bus interface chip, with 8 bit data bus and reading, writing and chip select lines and interrupt output, can easily attached to the system bus of the single chip microcomputer /DSP/MCU/MPU controller.
- Read more
-
-
- Modules, Other Modules, Wireless
ESP-01/ESP-01S Relay WiFi Smart Control Module for Arduino
- 65.00 EGP
- The ESP-01/ESP-01S Relay Module is a WiFi-based smart switch that allows you to control electrical devices remotely via your smartphone, tablet, or microcontroller (like Arduino). Designed to work seamlessly with the ESP8266 ESP-01/ESP-01S WiFi module, it enables wireless ON/OFF control of appliances over a network, making it ideal for IoT (Internet of Things) applications. This module is perfect for home…
- Add to cart
-
- Modules, Other Modules
Grove reader Recognition Fingerprint Module R307
- 900.00 EGP
- Grove R307 Fingerprint Module – high-accuracy biometric recognition sensor for Arduino, Raspberry Pi, and IoT projects. Ideal for access control, smart locks, and attendance systems.
- Add to cart
-
- Other Modules
GY-271 HMC5883L Compass Magnetometer Module
- 145.00 EGP
- The GY-271 is a compact, high-performance 3-axis digital compass module based on the HMC5883L magnetometer chip from Honeywell. Designed to measure magnetic fields along the X, Y, and Z axes, this module provides accurate heading information, making it ideal for use in robotics, navigation systems, drones, and mobile devices. With its I2C communication interface and easy integration with microcontrollers such…
- Add to cart
-
- Other Modules
GY-273 3-Axis Compass Magnetometer Sensor Module
- 250.00 EGP
- GY-273 DC 3V-5V HMC5883L Triple Axis Compass Magnetometer Sensor Module Three Axis Magnetic Field Module for Arduino
- Add to cart
-
- Out of Stock
- Other Modules
GY-291 ADXL345 3-Axis Accelerometer
- 60.50 EGP
- GY-291 ADXL345 3-Axis is a small and efficient sensor with a high resolution (13-bit) that can measure an acceleration of up to ± 16g. The module can be accessed via the I2C or SPI protocol and can be supplied with a voltage between 3V and 5V.
- Read more
-
-
- Other Modules
GY-45 MMA845 3-Axis Accelerometer Module
- 100.00 EGP
- The MMA8452 is a smart low-power, three-axis accelerometer with 12 bits of resolution. This accelerometer is packed with embedded functions with flexible user programmable options, configurable to two interrupt pins. The MMA8452 has user selectable full scales of ±2g/±4g/±8g. The device can be configured to generate inertial wake-up interrupt signals allowing the MMA8452 to monitor events and remain in a…
- Add to cart
-
- Sale!
- Other Modules
GY-521 MPU6050 Triple 3-Axis Accelerometer Gyroscope I2C
- Original price was: 150.00 EGP.125.00 EGPCurrent price is: 125.00 EGP.
- The GY-521 module is a compact and powerful sensor board based on the MPU6050 chip, which combines a 3-axis accelerometer and a 3-axis gyroscope in a single package. This module is ideal for motion tracking, gesture detection, and stabilization in a wide range of applications including robotics, drones, gaming, and wearable tech.
- Add to cart
-
- Out of Stock
- Other Modules
GY-61 DXL335 3-Axis Accelerometer Module
- 180.00 EGP
- GY-61 ADXL335 Module is a small, thin, low-power, complete 3-axis accelerometer with signal conditioned voltage outputs. The ADXL335 Module 3-axis Analog Output Accelerometer measures acceleration with a minimum full-scale range of ±3 g. It can measure the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion, shock, or vibration. This breakout board comes with…
- Read more
-
-
- Out of Stock
- Other Modules
GY-65 BMP085 Atmospheric Pressure Altimeter Module
- 72.00 EGP
- GY-65 BMP085 is a high precision, ultra-low power consumption pressure sensors, can be applied to mobile devices. Its performance, the absolute accuracy of the minimum can reach 0.03hPa, and very low power consumption, only 3A. BMP085 powerful 8-pin ceramic-lead chip carrier (LCC) ultra-thin package, through the I2C bus can be connected directly with a variety of microprocessor.
- Read more
-
-
- Out of Stock
- Other Modules
GY-88 IMU 10DOF MPU6050 + HMC5883L + BMP085
- 220.00 EGP
- This IMU 10DOF is a motion tracking module. Its design is based on the sensor MPU6050,HMC5883L and BMP085. The sensor MPU6050 which is the world’s first integrated 6-axis Motion Tracking device, that combines a 3-axis gyroscope, 3-axis accelerometer, and a Digital Motion Processor (DMP). The Honeywell’s HMC5883L which is a 3-axis digital compass. The BMP085 is a high-accuracy chip to…
- Read more
-
-
- Other Modules
High-power MOSFET Trigger Switch Drive Module
- 40.00 EGP
- High-power MOSFET Trigger Switch Drive Module
- Add to cart
-
- Other Modules
I2C Arduino Serial Module For LCD 16*2
- 40.00 EGP
- Simplify your LCD connections with this I2C serial interface module, designed specifically for standard 16x2 character LCD displays. This compact adapter converts the LCD's parallel interface into a simple I2C (I²C) 4-wire connection, drastically reducing wiring complexity and saving precious GPIO pins on your microcontroller.
- Add to cart
-
- Out of Stock
- Other Modules
IRF520 MOSFET Driver Module
- 27.50 EGP
- IRF520 MOSFET Driver Module
- Read more
-
-
- Other Modules
Joystick Module X-Y For Arduino
- 28.00 EGP
- Lots of robotic projects need a joystick. This module offers an affordable solution to that. The Joystick module is similar to analog joysticks found in gamepads. It is made by mounting two potentiometers at a 90 degrees angle. The potentiometers are connected to a short stick centered by springs.
- Add to cart
-
- Out of Stock
- Other Modules
Kingston Canvas Select Plus 32GB Micro SD Card
- 121.00 EGP
- Read more
-
-
- Medical Sensors, Modules, Other Modules, Sensors
KY039 Finger Detection Heartbeat Measuring Sensor Module
- 30.00 EGP
- The KY-039 Heartbeat Sensor Module is a photoplethysmography (PPG)-based sensor designed to detect heartbeat/pulse signals by measuring blood flow changes in fingertips or earlobes. This low-cost module uses an infrared (IR) LED and phototransistor to capture pulse waveforms, making it ideal for health monitoring, fitness tracking, and biomedical projects. With simple analog output compatibility, the KY-039 can interface with Arduino, Raspberry Pi, and other microcontrollers to visualize real-time pulse data or trigger alerts.
- Add to cart
-
- Modules, Other Modules
LASER Receiver Module
- 65.00 EGP
- This Laser Receiver Module is a high-sensitivity photoelectric sensor designed to detect laser beams (650nm red or 850nm IR) for precision alignment, security systems, and industrial automation. With a digital/analog output, it’s perfect for Arduino, PLCs, and DIY projects requiring beam-break detection.
- Add to cart
-
- Batteries & Accessories, Modules, Other Modules
LCD Dual USB 5V 1A 2.1A Mobile Power Bank Module
- 150.00 EGP
- The LCD Dual USB Power Bank Module is a smart charging control board designed for DIY power banks, portable chargers, and backup battery projects. Featuring dual USB outputs (5V/1A + 5V/2.1A), an LCD battery level display, and overcharge/discharge protection, this module efficiently converts 3.7V Li-ion/Polymer batteries into a reliable power source for smartphones, tablets, and USB devices. With real-time voltage/current monitoring and compact design, it’s perfect for hobbyists and professionals building custom power solutions.
- Add to cart
-
- Other Modules
LED Matrix 8×8 MAX7219 Module for Arduino and Microcontroller
- 150.00 EGP
- Buy the LED Matrix 8x8 MAX7219 Module for Arduino and Microcontroller. Easy-to-use LED display with SPI interface, adjustable brightness, and cascading support. Perfect for scrolling text, DIY electronics, and robotics projects.
- Add to cart
-
- Out of Stock
- Other Modules
Lipo Battery Voltage Tester / Low Voltage Buzzer Alarm
- 55.00 EGP
- LIPO Battery Voltage Tester and low voltage buzzer alarm combo is easy to use. Li-Po Battery Voltage Buzzer Indicator: directly plug it into your operating battery, it will monitor the conditions of your battery all the time, so your batteries shall remain within safe operating voltage range at all times.
- Read more
-
-
- Batteries & Accessories, Chargers, Modules, Other Modules
Lithium Battery Charger Protection Module (BMS) 3S 40A 12.6V
- 85.00 EGP
- A compact and versatile storage solution designed for organizing small electronic components, screws, beads, and craft supplies. This 10-compartment plastic box features transparent lids for easy identification and secure snap-lock closures to prevent spills.
- Add to cart
-
- Batteries & Accessories, Chargers, Lithium Batteries, Modules, Other Modules
Lithium Battery Charger Protection Module (BMS) 5S 15A 21V
- 135.00 EGP
- The 5S 15A Battery Management System (BMS) is a high-performance protection and charging module designed for 5-cell lithium-ion (Li-ion/LiPo) battery packs (18.5V/21V). With 15A continuous discharge current, overcharge/over-discharge protection, and cell balancing, this BMS ensures safe, efficient, and long-lasting battery operation for electric scooters, solar storage, power tools, and high-voltage DIY projects.
- Add to cart
-
- Out of Stock
- Other Modules
MAX6675 Module for Thermocouple K Type
- 110.00 EGP
- Read more
-
-
- Out of Stock
- Other Modules
MAX6675 Module for Thermocouple K Type
- 225.00 EGP
- This K Type Thermocouple can be used to measure temperatures up to 600 degree Celsius! Great for industrial projects, 3D Printers, DIY and hobby projects which require a high temperature to be measured.
- Read more
-
-
- Other Modules
MCP2515 CAN Bus Module Board TJA1050 Receiver SPI For 51 MCU
- 210.00 EGP
- The MCP2515 Module adopts CAN controller MCP2515, and TJA1050 high-speed CAN transceiver. Microchip MCP2515 independent CAN protocol controller, support CAN V2.0B regulation. The connection between MCP2515 and MCU is through SPI.
- Add to cart
-
- Sale!
- Other Modules
MCR12 Barcode Reader / Scanner Module
- Original price was: 1,000.00 EGP.700.00 EGPCurrent price is: 700.00 EGP.
- Decode nearly any kind of 1D (striped) barcode in your project using this adorable compact barcode scanner. We've looked all over for a small, light, low-power module that can be easily integrated. This OEM scanner has a little camera inside that takes 100 photos per second, instead of using a 'scanning mirror' assembly. This means its less likely to get…
- Add to cart
-
- Out of Stock
- Other Modules
Micro SD Card Module
- 50.00 EGP
- Micro SD card mini TF card reader module SPI interfaces with level converter chip
- Read more
-
-
- Out of Stock
- Other Modules
Micro-USB Female Breakout Module
- 15.00 EGP
- A Female MicroUSB port with breakout board so you can solder on wires or header pins and integrate into any project.
- Read more
-
-
- Modules, Other Modules
Mini 5V Traffic Light LED Display Module for Arduino Red Yellow Green 5mm LED
- 30.00 EGP
- Mini 5V Traffic Light LED Display Module with Red, Yellow, and Green 5mm LEDs. Perfect for Arduino, Raspberry Pi, and DIY projects to simulate real traffic signals. Ideal for education, robotics, and STEM learning.
- Add to cart
-
- Other Modules
NE555 Adjustable Frequency Pulse Generator Module
- 30.00 EGP
- This NE555-based pulse generator module is a versatile and easy-to-use signal source capable of producing adjustable-frequency square waves for timing, PWM, tone generation, and motor control. With onboard potentiometers for fine-tuning, it’s perfect for prototyping, testing, and educational projects.
- Add to cart
-
- Other Modules
Photosenstive Diode Module
- 27.50 EGP
- Photosenstive diode module is the most sensitive for environmental light intensity, generally used for detecting the ambient brightness and intensity. In most of the cases with photosenstive resistance sensor module universal, it is difference that is the photosensitive diode module directional well and can sense the fixed direction of light source
- Add to cart
-
- Other Modules
Reed Switch Module
- 35.00 EGP
- Reed switch is a kind of passive electronic switching component with contacts with a simple structure, small size and easy to control. It consists of a sealed glass envelope where there are two ferrous elastic reeds and is filled with inert gas called rhodium
- Add to cart
-
- Out of Stock
- Other Modules
Relay 1 channel 30A 240VAC
- 55.00 EGP
- 30A relay module, normally open interface with maximum load: AC 240V/30A, DC 30V/30A
- Read more
-
-
- Sale!
- Other Modules
Relay Module (5V-10A) 1Channel Low level trigger
- Original price was: 35.00 EGP.30.00 EGPCurrent price is: 30.00 EGP.
- This 5V 10A Relay Module is a simple yet powerful solution for controlling high-voltage devices with low-voltage microcontroller signals. Featuring a single channel relay with low-level trigger input, it allows you to switch loads up to 10A safely and efficiently.
- Add to cart
-
- Out of Stock
- Other Modules
Relay Module 16 Channel 5V
- 231.00 EGP
- Relay Module 16 Channel 5V
- Read more
-
-
- Components, Other Modules, Relays
Relay Module 2 Channel 12V (high/low) level trigger
- 75.00 EGP
- This 2-Channel 12V Relay Module allows you to control high-voltage/high-current devices (up to 250V AC / 30V DC @ 10A per channel) using a 12V control signal, making it ideal for automotive, industrial, and home automation applications. Each relay features optocoupler isolation for protection against voltage spikes and supports both HIGH and LOW-level triggering (configurable via jumper).
- Add to cart
-
- Out of Stock
- Other Modules
Relay Module 2 Channel 5V (high/low) level trigger
- 80.00 EGP
- This versatile 2-Channel 5V Relay Module allows you to control two independent high-voltage devices using low-voltage signals from microcontrollers like Arduino, Raspberry Pi, ESP32, and more. It supports both high-level and low-level trigger modes, making it compatible with a wide range of control circuits.
- Read more
-
-
- Other Modules
Relay Module 8 Channel 5V
- 240.00 EGP
- The 8-Channel 5V Relay Module is a versatile switching board that allows microcontrollers (like Arduino, ESP8266, or Raspberry Pi) to control high-voltage/high-current devices (up to 10A 250V AC or 10A 30V DC per channel). It’s ideal for home automation, industrial control, and IoT projects requiring multiple electrical load controls.
- Add to cart
-
- Out of Stock
- Modules, Other Modules
Rgb Led Module
- 10.00 EGP
- RGB LED is a light emitting diode that displays just about any color by manipulating the intensities of either the Red, the Green or the Blue LED.
- Read more
-
-
- Out of Stock
- Other Modules
SD Card Module, SPI Interface
- 55.00 EGP
- This is a wonderful little Arduino to SD card interface module.Through programming, you can read and write to the SD card using your arduino.If you are feeling adventurous, this is truly an interesting board to work with and learn from.It is easily interfaced as a peripheral to your arduino sensor shield module.
- Read more
-
-
- Out of Stock
- Other Modules
SILICON POWER USB Flash Ultima U03, 32GB, USB 2.0
- 110.00 EGP
- Elegant and stylish USB drive with luxurious diamond cut pattern and 32GB storage capacity
- Read more
-
-
- Other Modules
Single Channel 5V DC Relay Module Solid State Low Level Trigger
- 70.00 EGP
- This Single-Channel 5V DC Solid State Relay (SSR) Module provides silent, fast-switching control for AC/DC loads using a low-level (0V) trigger signal from microcontrollers like Arduino, ESP8266, or Raspberry Pi. Unlike mechanical relays, this SSR has no moving parts, ensuring longer lifespan, zero noise, and no contact sparking. Perfect for high-speed switching applications, such as temperature controllers, LED lighting, and small appliances, this module supports DC control (5V) and AC/DC load…
- Add to cart
-
- Other Modules
TEC1-12709 Thermoelectric Cooler (Peltier)
- 365.00 EGP
- The TEC1-12709 is a high-performance thermoelectric cooler based on the Peltier effect, capable of efficiently transferring heat from one side to the other when powered. It’s widely used in applications requiring compact, reliable, and silent cooling or heating solutions.
- Add to cart
-
- Modules, Other Modules, Switches
Tilt Switch Module KY020
- 35.00 EGP
- The KY-020 Tilt Switch Module is a simple ball-in-cage tilt sensor that detects orientation changes. When tilted beyond a threshold angle, it triggers a digital signal (HIGH/LOW), making it ideal for position detection, anti-theft alarms, and motion-activated projects. This module includes a comparator circuit (LM393) for clean signal output and works with 3.3V or 5V microcontrollers like Arduino, ESP8266, and Raspberry Pi.
- Add to cart
-
- Out of Stock
- Other Modules
Ublox NEO-6m GPS tested Module v2
- 450.00 EGP
- The NEO-6M GPS Module (V2) is a high-performance, low-power GPS receiver based on u-blox NEO-6M chipset, providing accurate positioning, navigation, and timing data. With a built-in ceramic antenna and external antenna support, it offers reliable satellite tracking for drones, vehicle trackers, smartwatches, and IoT devices. This module supports multiple satellite systems (GPS, GLONASS, Galileo) and features EEPROM backup for fast hot starts, making it ideal for real-time tracking and geofencing applications.
- Read more
-
