Search Results for "CONVERTER"
-
MAX6675 Module for Thermocouple K Type
This K Type Thermocouple can be used to measure temperatures up to 600 degree Celsius! Great for industrial projects, 3D Printers, DIY and hobby projects which require a high temperature to be measured.
285.00 EGPMAX6675 Module for Thermocouple K Type
285.00 EGP -
GY-273 3-Axis Compass Magnetometer Sensor Module
GY-273 DC 3V-5V HMC5883L Triple Axis Compass Magnetometer Sensor Module Three Axis Magnetic Field Module for Arduino
210.00 EGP -
Sharp Analog Distance Sensor
The Sharp GP2Y0A21 IR Infrared Distance Sensor is an analog proximity sensor with a range of 10-80cm.
200.00 EGPSharp Analog Distance Sensor
200.00 EGP -
MCP4725 I2C DAC Breakout Board
The MCP4725 is a single-channel 12-bit buffered voltage output DAC with non-volatile memory (EEPROM) that allows you to store configuration register bits (2 bits) and DAC input data (12 bits) to non-volatile EEPROM (14-bit) In memory.
50.00 EGPMCP4725 I2C DAC Breakout Board
50.00 EGP -
FTDI Module – USB to TTL (Switchable 3.3 or 5V) FT232RL
The FTDI USB to TTL serial converter module is a UART (universal asynchronous receiver-transmitter) board used for TTL serial communication. It is a breakout board for the FTDI FT232R chip with a USB interface, can use 3.3 or 5 V DC and has Tx/Rx and other breakout points.
150.00 EGP -
Makerbase MKS Gen V1.4 3D Printer MainBoard Controller
Mega 2560 and ramps1.4 set on a board, to solve complicated Ramps1.4 combination of interfaces, the problem of failure prone.
Replace the motor drive, drive and support 4988 8825 drive.
The circuit board with high-quality 4-layer, heat and made a special optimization; ramps are 2 shelves.
1,100.00 EGP -
DC-DC Adjustable Step-Down Power Supply Module -XL4005 5A 75W DSN5000
XL4005 is a 300KHz fixed frequency PWM buck (step-down) DC/DC converter, capable of driving a 5A load with high efficiency, low ripple and excellent line and load regulation. Requiring a minimum number of external components, the regulator is simple to use and include internal frequency compensation and a fixed-frequency oscillator.
48.00 EGP -
HC-06 Bluetooth Module
- The HC-06 is a class-2 slave Bluetooth module.
- It is designed to enable wireless serial communication between microcontroller (like Arduino) and other Bluetooth enabled devices.
- All data received through the serial input is immediately transmitted wirelessly by the module, when the module receives some wireless data from the master device (like a smartphone), this data is sent out through the serial interface.
- A Logic Level Converter is recommended to convert the 5v input to 3.3V.
200.00 EGPHC-06 Bluetooth Module
200.00 EGP -
Micro SD Card Module
Micro SD card mini TF card reader module SPI interfaces with level converter chip
50.00 EGPMicro SD Card Module
50.00 EGP -
AMS1117 5V to 3.3V DC-DC Step-Down Power Supply Buck Module 800mA
3.3V DC-DC Step-Down Power Supply To 5V Buck Module AMS1117 Automatic Automatic Adjustable Boost Board Start Limit Voltage11.00 EGP -
STM32 F103C8T6 Controller
STM-32 F103C8T6 Controller
300.00 EGPSTM32 F103C8T6 Controller
300.00 EGP