HC-06 Bluetooth Module
Roll over image to zoom in
145.00 EGP
- The HC-06 is a class-2 slave Bluetooth module.
- It is designed to enable wireless serial communication between microcontroller (like Arduino) and other Bluetooth enabled devices.
- All data received through the serial input is immediately transmitted wirelessly by the module, when the module receives some wireless data from the master device (like a smartphone), this data is sent out through the serial interface.
- A Logic Level Converter is recommended to convert the 5v input to 3.3V.
Email when stock available
The Bluetooth module HC-06 has 4 pins, 2 for power and 2 to establish connection.
- VCC power supply. Typically hooked up to 5V pin of the Arduino.
- GND ground. Typically hooked up to GND pin of the Arduino
- RX reception pin. Typically hooked up to transmission pin (TX) of the Arduino
- TX transmission pin. Typically hooked up to reception pin (RX) of the Arduino
HC-06 Features
- Bluetooth protocol: Bluetooth V2.0 protocol standard
- Power Level: Class2 (+6dBm)
- Band: 2.40GHz—2.48GHz, ISM Band
- Receiver sensitivity: -85dBm
- USB protocol: USB v1.1/2.0
- Modulation mode: Gauss Frequency Shift Keying
- Safety feature: Authentication and encryption
- Operating voltage range: +3.3V to +6V
- Operating temperature range: -20ºC to +55ºC
- Operating Current: 40mA
Package Included:
1 X Bluetooth module HC-06
Reviews
There are no reviews yet.