-
- Out of Stock
- Motor Drivers
10A Double Way Motor Driver
- 385.00 EGP
- 10A Double Way Motor Driver
- Read more
-
-
- Out of Stock
- Motor Drivers
10A Single Channel DC Motor Drive Board 350W
- 242.00 EGP
- 10A Single Channel DC Motor Drive Board Module Industrial Large Power MOSFET Single H Bridge w/ Braking
- Read more
-
-
- Out of Stock
- Motor Drivers
16 Channel 12-bit PWM Servo Driver – PCA9685
- 132.00 EGP
- It’s an I2C-controlled PWM driver with a built in clock. Adjustable frequency up to about 1.6 KHz. 12-bit resolution for each output for servos, that means about 4us resolution at 60Hz update rate.
- Read more
-
-
- Out of Stock
- Motor Drivers
30A Dual Motor Driver High-Power H Bridge
- 440.00 EGP
- 30A Dual Motor Driver High-Power H Bridge
- Read more
-
-
- Out of Stock
- Motor Drivers
30A ESC Brushless Motor Speed Controller
- 308.00 EGP
- 30A RC Brushless Motor Electric Speed Controller ESC Yellow for Airplane Quadcopter Drone Model Helicopter Parts
- Read more
-
-
- Motor Drivers
32 Channel USB Servo Motor Drive Shield – Arduino Compatible
- 750.00 EGP
- 32Pcs, Servo Motor Control Board Can Support PS2
- Add to cart
-
- Out of Stock
- Motor Drivers
3M660-N Microstep Driver
- 990.00 EGP
- 3M660 is a constant torque microstepping driver, voltage range from 24-58VDC, it’s suitable for various 3-phase NEMA23 & NEMA34 hybrid stepper motorWith the build-in constant current chopping circuit similar to servo driver, the motor run stable without vibration and noise in low speed.
- Read more
-
-
- Out of Stock
- Motor Drivers
4 Channels Dc Servo Stepper Motor Driver Module For Arduino L298
- 242.00 EGP
- 4 Channels Dc Servo Stepper Motor Driver Module For Arduino L298
- Read more
-
-
- Out of Stock
- Motor Drivers
4.8-6V Servo Tester CCPM Consistency Master Checker with Rev
- 55.00 EGP
- CCPM Servo Consistency Tester
- Read more
-
-
- Motor Drivers
A3967 Easy Driver Microstepping Driver
- 95.00 EGP
- The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver).
- Add to cart
-
- Out of Stock
- Motor Drivers
A4988 Stepper Motor Driver 2A
- 65.00 EGP
- A4988 Stepper Motor Driver 2A
- Read more
-
-
- Out of Stock
- Motor Drivers
Arduino L298P Motor Shield
- 198.00 EGP
- Arduino L298P Motor Shield
- Read more
-
-
- Out of Stock
- Motor Drivers
Arduino Shield “Monster Moto – Motor Driver 30A One Channelâ€
- 242.00 EGP
- Arduino Shield “Monster Moto – Motor Driver 30A One Channelâ€
- Read more
-
-
- Motor Drivers
CNC Router Single Axis 4.5A TB6600 Stepper Motor Driver
- 600.00 EGP
- CNC Router Single Axis
- Add to cart
-
- Out of Stock
- Motor Drivers
CNC Router Single Axis TB6600 Stepper Motor Driver 4A
- 420.00 EGP
- This drive is an upgraded version of TB6600, heightening segments to 32 segments, for high-use segments. Applicable stepper motor: 42,57,86 type 2-phase 4-phase (4-wire line 6 line 8)
- Read more
-
-
- Out of Stock
- Motor Drivers
Cytron 13Amp 6V-30V DC Motor Driver
- 540.00 EGP
- Cytron 13Amp
- Read more
-
-
- Out of Stock
- Motor Drivers
DM860 Stepper Motor Driver
- 1,485.00 EGP
- DM860 Microstep driver 2 phase 7.2A DC18-80V
- Read more
-
-
- Motor Drivers
DRV8825 Stepper Motor Driver (md20b)
- 120.00 EGP
- The DRV8825 stepper motor driver carrier is a breakout board for DRV8825 microstepping bipolar stepper motor driver. The module has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver board, so it can be used as a higher-performance drop-in replacement for those boards in many applications. The DRV8825 features adjustable current limiting, overcurrent…
- Add to cart
-
- Out of Stock
- Motor Drivers
Dual Monster Moto Shield VNH2SP30 DC Motor Driver 30A
- 264.00 EGP
- The Dual Monster Moto Shield VNH2SP30 DC Motor Driver 2x14A (Peak 30A) is essentially a ramped up version of our Ardumoto motor driver shield. For this Monster Moto Shield, It is replaced the L298 H-bridge with a pair of VNH2SP30 full-bridge motor drivers.
- Read more
-
-
- Out of Stock
- Motor Drivers
IBT-2 Motor Driver 43A
- 275.00 EGP
- IBT-2 43A H-Bridge Motor Driver Module the drive uses an H-bridge driver module that composed by Infineon power drive chip BTS7960, with overheating and overcurrent protection. motor driver H-bridge driver circuit, with strong drive and braking effect, use 74HC244 chip effectively isolate the microcontroller and the motor drive High Current up to 43A IBT-2 motor driver is a fully integrated…
- Read more
-
-
- Out of Stock
- Motor Drivers
L293D 4-DC Motor Driver
- 165.00 EGP
- DC Motor Driver The drive module can directly drive four DC motors, drive the car chassis is 4WD 4 choice. Driving battery big up to 1A generally smart car motor current 100-300MA only four are sufficient to meet the control requirements. The circuit stability. Can directly drive 4-way 3-16V DC motor, and provides a 5V output interface (input as little…
- Read more
-
-
- Motor Drivers
L293D Arduino Dual Motor Shield
- 100.00 EGP
- L293 Motor Driver Shield for DC motor/ stepper motor / servo motor
- Add to cart
-
- Motor Drivers
L298 Large Current Dual Dc Motor Driver Shield
- 165.00 EGP
- Large Current Dual Dc Motor Driver using ST STMicroelectronics outstanding high-power motor driver chip dedicated L298N, direct drive DC motors, two-phase, four-phase stepper motor drive current up to 2A, motor output using eight-speed Schott group as a protective diode. The circuit line wiring reasonable mount components are used in films, laminated design can be directly plugged into the use of…
- Add to cart
-
- Motor Drivers
L298 Motor driver
- 85.00 EGP
- L298 motor driver
- Add to cart
-
- Out of Stock
- Motor Drivers
L298 Original Chip Module
- 110.00 EGP
- L298 Original Chip Module
- Read more
-
-
- Out of Stock
- Motor Drivers
L9110 Dual Motor Driver (1A)
- 30.00 EGP
- There are two L9110S motor control chip onboardThis module can simultaneously drive two DC motors or a 4-wire 2-phase stepper motor
- Read more
-
-
- Out of StockSale!
- Motor Drivers
MA860H Stepper Motor Driver
- Original price was: 1,660.00 EGP.1,599.00 EGPCurrent price is: 1,599.00 EGP.
- MA860H Stepper Motor Driver is a high-performance stepper driver implemented with pure-sinusoidal current control technology. The MA860H Digital Stepper Motor Driver 50-110 VDC with 1.8-7.5A can be used to drive 2-phase or 4-phase motors (from “NEMA 17” or “NEMA 34” size) with less noise and heat. And it can provide better performances at high speed than most of the drivers…
- Read more
-
-
- Cytron, MAKER Series, Motor Drivers, Motors
Maker Pi RP2040 : Simplifying Robotics with Raspberry Pi® RP2040 MAKER-PI-RP2040
- 1,335.00 EGP
- Maker Pi RP2040 features the first microcontroller designed by Raspberry Pi - RP2040, embedded on a robot controller board. This board comes with dual channel DC motor driver, 4 servo motor ports and 7 Grove I/O connectors, ready for your next DIY robot / motion control project. Now you can build robot, while trying out the new RP2040 chip.
- Add to cart
-
- Out of Stock
- Motor Drivers
Makerbase MKS TMC2209 Stepper Motor Driver
- 185.00 EGP
- Read more
-
-
- Motor Drivers
Mini Usb 16 Servo motor Controller Board
- 550.00 EGP
- Mini Usb 16 Servo motor Controller Board
- Add to cart
-
- Motor Drivers
Stepper Motor ULN2003 Driver Module
- 35.00 EGP
- The ULN2003 stepper motor driver PCB provides a direct drive interface between your microcontroller and stepper motor. The PCB provides 4 inputs for connection to your microcontroller, power supply connection for the stepper motor voltage, and ON/OFF jumper, a direct connect stepper motor header and 4 LEDs to indicate stepping state
- Add to cart
-
- Motor Drivers
TB6560 CNC 3 AXIS STEPPER MOTOR DRIVER CONTROLLER BOARD FOR MACH3 KCAM4 EMC2 36V
- 1,200.00 EGP
- TB6560 CNC 3 AXIS STEPPER MOTOR DRIVER CONTROLLER BOARD FOR MACH3 KCAM4 EMC2 36V
- Add to cart
-
- Out of Stock
- Motor Drivers
TB6560 CNC 3-Axis Driver 3.5A
- 825.00 EGP
- TB6560 stepper motor driver can drive up to 3 stepper motors with 3.5 A peak current for each motor. It is also equipped with spindle relay output and can handle a spindle. It has micro-stepping capability up to 1/16 micro-step. The driver is integrated with break output board (so you do not need one) and can be connected directly to…
- Read more
-
-
- Motor Drivers
TB6560 Stepper Motor Driver
- 550.00 EGP
- TB6560 Stepper Motor Driver
- Add to cart
