-
- Out of Stock
- Motor Drivers
10A Double Way Motor Driver
- 385.00 EGP
- 10A Double Way Motor Driver
- Read more
-
-
- Out of Stock
- Motor Drivers
10A Single Channel DC Motor Drive Board 350W
- 242.00 EGP
- 10A Single Channel DC Motor Drive Board Module Industrial Large Power MOSFET Single H Bridge w/ Braking
- Read more
-
-
- Out of Stock
- DC Motors
12V 4000 RPM DC Motor
- 110.00 EGP
- 12V 4000 RPM DC Motor
- Read more
-
-
- Out of Stock
- Motor Drivers
16 Channel 12-bit PWM Servo Driver – PCA9685
- 132.00 EGP
- It’s an I2C-controlled PWM driver with a built in clock. Adjustable frequency up to about 1.6 KHz. 12-bit resolution for each output for servos, that means about 4us resolution at 60Hz update rate.
- Read more
-
-
- Out of Stock
- Stepper Motors
17HD40005H NEMA 17 Stepper Motor
- 275.00 EGP
- This model features high torque, low driving voltage, and minimal heat gain, making it perfect for continuous operation in 3D printers, laser engravers, CNC routers, etc.
- Read more
-
-
- Out of Stock
- Stepper Motors
28BYJ-48 Stepper Motor 5VDC
- 75.00 EGP
- Mainly used in Air Conditioner Louver , Small Cooling/Heating Fan etc.
- Read more
-
-
- Out of Stock
- Pumps
3-6V DC 370 Aquarium Mini Air Pump Motor
- 160.00 EGP
- 3-6V DC 370 Aquarium Mini Air Pump Motor
- Read more
-
-
- Out of Stock
- Motor Drivers
30A Dual Motor Driver High-Power H Bridge
- 440.00 EGP
- 30A Dual Motor Driver High-Power H Bridge
- Read more
-
-
- Out of Stock
- Motor Drivers
30A ESC Brushless Motor Speed Controller
- 308.00 EGP
- 30A RC Brushless Motor Electric Speed Controller ESC Yellow for Airplane Quadcopter Drone Model Helicopter Parts
- Read more
-
-
- Motor Drivers
32 Channel USB Servo Motor Drive Shield – Arduino Compatible
- 750.00 EGP
- 32Pcs, Servo Motor Control Board Can Support PS2
- Add to cart
-
- Out of Stock
- Motor Drivers
3M660-N Microstep Driver
- 990.00 EGP
- 3M660 is a constant torque microstepping driver, voltage range from 24-58VDC, it’s suitable for various 3-phase NEMA23 & NEMA34 hybrid stepper motorWith the build-in constant current chopping circuit similar to servo driver, the motor run stable without vibration and noise in low speed.
- Read more
-
-
- Motors Accessories
4 Blades Plastic Propeller
- 20.00 EGP
- Four Blades Plastic Propeller for DIY Toys can be matched with a 2mm dc motor.
- Add to cart
-
- Out of Stock
- Motor Drivers
4 Channels Dc Servo Stepper Motor Driver Module For Arduino L298
- 242.00 EGP
- 4 Channels Dc Servo Stepper Motor Driver Module For Arduino L298
- Read more
-
-
- Out of Stock
- Motor Drivers
4.8-6V Servo Tester CCPM Consistency Master Checker with Rev
- 55.00 EGP
- CCPM Servo Consistency Tester
- Read more
-
-
- Out of Stock
- Fan
4020 Turbine Blower Fan 12V DC
- 44.00 EGP
- 4020 Turbine Blower Fan 12V DC
- Read more
-
-
- Motor Drivers
A3967 Easy Driver Microstepping Driver
- 95.00 EGP
- The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver).
- Add to cart
-
- Out of Stock
- Motor Drivers
A4988 Stepper Motor Driver 2A
- 65.00 EGP
- A4988 Stepper Motor Driver 2A
- Read more
-
-
- Out of Stock
- Pumps
Aqua Star Reverse Osmosis Booster Pump
- 368.50 EGP
- This pump is designed for us with reverse osmosis water purification system.
- Read more
-
-
- Pumps
Arduino DC6-12V Mini Aquarium Water Pump R385
- 275.00 EGP
- Water Vacuum Pump12V DC
- Add to cart
-
- Out of Stock
- Motor Drivers
Arduino L298P Motor Shield
- 198.00 EGP
- Arduino L298P Motor Shield
- Read more
-
-
- Out of Stock
- Motor Drivers
Arduino Shield “Monster Moto – Motor Driver 30A One Channelâ€
- 242.00 EGP
- Arduino Shield “Monster Moto – Motor Driver 30A One Channelâ€
- Read more
-
-
- Pumps
Bilge Pump 1100 GPH 12V
- 850.00 EGP
- Bilge 1100 GPH 12V Electric Marine Water Submersible Pump for Yacht Boat Ship
- Add to cart
-
- Pumps
Bilge Pump 1100 GPH 24V
- 900.00 EGP
- Blige Pump 1100 GPH 24V
- Add to cart
-
- Motor Drivers
CNC Router Single Axis 4.5A TB6600 Stepper Motor Driver
- 600.00 EGP
- CNC Router Single Axis
- Add to cart
-
- Out of Stock
- Motor Drivers
CNC Router Single Axis TB6600 Stepper Motor Driver 4A
- 420.00 EGP
- This drive is an upgraded version of TB6600, heightening segments to 32 segments, for high-use segments. Applicable stepper motor: 42,57,86 type 2-phase 4-phase (4-wire line 6 line 8)
- Read more
-
-
- Out of Stock
- Fan
Computer Case Cooling Fan 12V 9*9
- 55.00 EGP
- Read more
-
-
- Out of Stock
- Fan
Cooling Fan DC 24V 12*12
- 150.00 EGP
- Read more
-
-
- Out of Stock
- Servo Motors
CYS-S0200 20Kg Digital Metal Steering Gear Servo Motor
- 550.00 EGP
- Read more
-
-
- Out of Stock
- Servo Motors
CYS-S0650 55Kg Digital Metal Steering Gear Servo Motor
- 1,210.00 EGP
- Read more
-
-
- Out of Stock
- Motor Drivers
Cytron 13Amp 6V-30V DC Motor Driver
- 540.00 EGP
- Cytron 13Amp
- Read more
-
-
- Out of Stock
- Pumps
DC 12V 26.4W High Pressure Water Self Priming Pump
- 220.00 EGP
- Read more
-
-
- Out of Stock
- DC Motors
DC 12V 80W 13000rpm 775 Motor (High Speed Motor)
- 450.00 EGP
- Read more
-
-
- Out of Stock
- Fan
DC Air Turbo Blower 12V (50X50X15mm)
- 38.50 EGP
- DC Air Turbo Blower 12V (50X50X15mm)
- Read more
-
-
- Out of Stock
- DC Motors
DC Gear Motor (176RPM At 12V 8.8Kg.cm)
- 193.00 EGP
- DC Gear Motor (176RPM At 12V 8.8Kg.cm)
- Read more
-
-
- Motor Accessories
DC Geared Motor Bracket 25mm
- 45.00 EGP
- Black 90 Degree Metal Bracket Stand for 25mm DC Speed Reducing Gear Motor
- Add to cart
-
- DC Motors
DC Geared Motor Dual Shaft 3:12VDC 450RPM
- 40.00 EGP
- Yellow Gear Motor 3V to 12V 176 RPM For Arduino
- Add to cart
-
- DC Motors
DC Motor 5V Single Shaft
- 15.00 EGP
- This Is Very Useful Motor and this motor used in RC Toys. Good RPM High Torque And Durable product for your project. Easy to use, Long life, Good Product Quality.
- Add to cart
-
- DC Motor Driver, DC Motors, Modules, PCBs
DC Motor Speed Controller High Power Module (PWM 48V 20A)
- 280.00 EGP
- This is a simple and easy-to-use DC motor speed controller of small size, elegant appearance and stable performance. It is made with high quality circuit board which ensures a longer service life.
- Add to cart
-
- DC Motors, Motors
DC Motor with Gear Box JGA25-370-12V-133RPM 20Kg.cm
- 360.00 EGP
- A 12V DC motor, almost double the power of our 6V DC motor. This easy-to-mount JGA25-370 DC gearmotor is great for building robots and it comes in a variety of configurations that suit even the most exigent designs. This motor features a D-shaped output shaft. It is a powerful motor fitted with a 75:1 metal gearbox. The gears are all…
- Add to cart
-
- Out of Stock
- DC Motors
DC-12V 400RPM Geared Motor
- 350.00 EGP
- 25GA370 Gear Motor DC 12V 400 RPM Gear Motor Metal Gear Motor.
- Read more
-
-
- Out of Stock
- Motor Drivers
DM860 Stepper Motor Driver
- 1,485.00 EGP
- DM860 Microstep driver 2 phase 7.2A DC18-80V
- Read more
-
-
- Motor Drivers
DRV8825 Stepper Motor Driver (md20b)
- 120.00 EGP
- The DRV8825 stepper motor driver carrier is a breakout board for DRV8825 microstepping bipolar stepper motor driver. The module has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver board, so it can be used as a higher-performance drop-in replacement for those boards in many applications. The DRV8825 features adjustable current limiting, overcurrent…
- Add to cart
-
- Out of Stock
- Motor Drivers
Dual Monster Moto Shield VNH2SP30 DC Motor Driver 30A
- 264.00 EGP
- The Dual Monster Moto Shield VNH2SP30 DC Motor Driver 2x14A (Peak 30A) is essentially a ramped up version of our Ardumoto motor driver shield. For this Monster Moto Shield, It is replaced the L298 H-bridge with a pair of VNH2SP30 full-bridge motor drivers.
- Read more
-
-
- Fan
Fan 12V 0.08A 4x4CM
- 50.00 EGP
- Suitable for use in small equipment (space saving) for cooling electrical equipment / LEDs / components / modules / housing CCTV / DVR heat.
- Add to cart
-
- Out of Stock
- Fan
Fan 12V 0.10A 60x60x25mm
- 90.00 EGP
- 60*60*25mm 12V brushless DC cooling fans, with good airflow, cooling & circulation performance
- Read more
-
-
- Out of Stock
- Fan
Fan 12V 3x3CM
- 22.00 EGP
- A cooling fan is widely used to extend life of your system by cooling off heat of the system that many electrical components are mounted in a very high density and dissipating heat.
- Read more
-
-
- Fan
Fan 12V 6x6CM
- 60.00 EGP
- Fan 24V 6x6CM
- Add to cart
-
- Fan
Fan 12v 8*8
- 65.00 EGP
- Add to cart
-
- Out of Stock
- Fan
Fan 220V 0.16A 12x12CM
- 83.00 EGP
- Fan 220V 0.16A 12x12CM
- Read more
-
-
- Fan
Fan 24V 6*6
- 75.00 EGP
- Fan 5V 5x5cm
- Add to cart
-
- Fan
Fan 24V 8*8
- 65.00 EGP
- Fan 12V 0.22A 8*8*2.5 CM
- Add to cart
-
- Out of Stock
- Fan
Fan 24V 9*9
- 40.00 EGP
- Fan 24V 0.06A
- Read more
-
-
- Fan
Fan 5V (5X5cm)
- 75.00 EGP
- Add to cart
-
- Fan
Fan 5V (8X8cm)
- 85.00 EGP
- Add to cart
-
- Fan
Fan 5V (9X9cm)
- 85.00 EGP
- Add to cart
-
- Out of Stock
- Fan
Fan 5V 3×3
- 35.00 EGP
- Fan 5V 3x3
- Read more
-
-
- Out of Stock
- Fan
Fan Plastic Housing + Fan
- 33.00 EGP
- Cooling fan printer parts DIY Reprap Injection Moulded. Fan Duct fan housing guard with Cooling Fan.
- Read more
-
-
- Out of Stock
- DC Motors
GA37Y3530-50 12V DC Motor 8.8kg 176 RPM
- 198.00 EGP
- Read more
-
-
- Out of Stock
- Motor Drivers
IBT-2 Motor Driver 43A
- 275.00 EGP
- IBT-2 43A H-Bridge Motor Driver Module the drive uses an H-bridge driver module that composed by Infineon power drive chip BTS7960, with overheating and overcurrent protection. motor driver H-bridge driver circuit, with strong drive and braking effect, use 74HC244 chip effectively isolate the microcontroller and the motor drive High Current up to 43A IBT-2 motor driver is a fully integrated…
- Read more
-
-
- Out of Stock
- DC Motors
JGA25-370 12V 645 RPM
- 248.00 EGP
- 25GA370 Gear Motor DC 12V 645 RPM Gear Motor Metal Gear Motor.
- Read more
-
-
- Out of Stock
- DC Motors
JGA25-370 12V DC Gearmotor 17 RPM
- 215.00 EGP
- This easy to mount JGA25-370 DC gearmotor is great for building robots and it comes in a variety of configurations that suit even the most designs.
- Read more
-
-
- Out of Stock
- DC Motors
JGA25-370 DC Gearmotor (250 RPM At 12V)
- 110.00 EGP
- JGA25-370 DC gearmotor is easy to mount, great for building robots and it comes in a variety of configurations that suit even the most exigent designs. This motor features a D-shaped output shaft.
- Read more
-
-
- Out of Stock
- DC Motors
JGA25-370 DC Gearmotor (35 RPM At 6V)
- 110.00 EGP
- This easy-to-mount JGA25-370 DC gearmotor is great for building robots and it comes in a variety of configurations that suit even the most exigent designs. This motor features a D-shaped output shaft.
- Read more
-
-
- Out of Stock
- DC Motors
JGA25-370 DC Gearmotor 126 RPM with Encoder 12V
- 650.00 EGP
- This easy to mount JGA25-370 DC gearmotor is great for building robots and it comes in a variety of configurations that suit even the most designs.
- Read more
-
-
- Out of Stock
- Motor Drivers
L293D 4-DC Motor Driver
- 165.00 EGP
- DC Motor Driver The drive module can directly drive four DC motors, drive the car chassis is 4WD 4 choice. Driving battery big up to 1A generally smart car motor current 100-300MA only four are sufficient to meet the control requirements. The circuit stability. Can directly drive 4-way 3-16V DC motor, and provides a 5V output interface (input as little…
- Read more
-
-
- Motor Drivers
L293D Arduino Dual Motor Shield
- 100.00 EGP
- L293 Motor Driver Shield for DC motor/ stepper motor / servo motor
- Add to cart
-
- Motor Drivers
L298 Large Current Dual Dc Motor Driver Shield
- 165.00 EGP
- Large Current Dual Dc Motor Driver using ST STMicroelectronics outstanding high-power motor driver chip dedicated L298N, direct drive DC motors, two-phase, four-phase stepper motor drive current up to 2A, motor output using eight-speed Schott group as a protective diode. The circuit line wiring reasonable mount components are used in films, laminated design can be directly plugged into the use of…
- Add to cart
-
- Motor Drivers
L298 Motor driver
- 85.00 EGP
- L298 motor driver
- Add to cart
-
- Out of Stock
- Motor Drivers
L298 Original Chip Module
- 110.00 EGP
- L298 Original Chip Module
- Read more
-
-
- Out of Stock
- Motor Drivers
L9110 Dual Motor Driver (1A)
- 30.00 EGP
- There are two L9110S motor control chip onboardThis module can simultaneously drive two DC motors or a 4-wire 2-phase stepper motor
- Read more
-
-
- Out of StockSale!
- Motor Drivers
MA860H Stepper Motor Driver
- Original price was: 1,660.00 EGP.1,599.00 EGPCurrent price is: 1,599.00 EGP.
- MA860H Stepper Motor Driver is a high-performance stepper driver implemented with pure-sinusoidal current control technology. The MA860H Digital Stepper Motor Driver 50-110 VDC with 1.8-7.5A can be used to drive 2-phase or 4-phase motors (from “NEMA 17” or “NEMA 34” size) with less noise and heat. And it can provide better performances at high speed than most of the drivers…
- Read more
-
-
- Out of Stock
- Motor Drivers
Makerbase MKS TMC2209 Stepper Motor Driver
- 185.00 EGP
- Read more
-
-
- Motors Accessories
Metal Servo Arm Horn Spline
- 37.50 EGP
- Metal Servo Arm Horn Spline
- Add to cart
-
- Out of Stock
- Servo Motors
MG90S Metal Gear Micro Servo Motor
- 135.00 EGP
- MG90S Metal Gear Micro Servo Motor
- Read more
-
-
- Out of Stock
- Servo Motors
Mg945 Metal Gear Servo Motor/Digital Steering Gear
- 143.00 EGP
- MG945 12KG High Speed Torque Analog Metal Gear Servo for RC Drone Car Boat Helicopter RC Parts Servo.
- Read more
-
-
- Servo Motors
Mg995 Gear Servo Motor / Digital Steering Gear 180 Degree
- 200.00 EGP
- Mg995 Metal Gear Servo Motor / Digital Steering Gear 180 Degree
- Add to cart
-
- Servo Motors
Mg995 Gear Servo Motor/Digital Steering Gear 360 Degree
- 200.00 EGP
- Mg995 Metal Gear Servo Motor/Digital Steering Gear 360 Degree
- Add to cart
-
- Servo Motors
Mg996R Metal Gear Servo Motor / Digital Steering Gear 180 Degree
- 195.00 EGP
- Mg996R Metal Gear Servo Motor / Digital Steering Gear 180 Degree
- Add to cart
-
- Out of Stock
- Motors Accessories
Mini Drill Bit Collet Micro Twist Drill Chuck Set
- 60.50 EGP
- Mini Drill Bit Collet Micro Twist Drill Chuck Set
- Read more
-
-
- Motor Drivers
Mini Usb 16 Servo motor Controller Board
- 550.00 EGP
- Mini Usb 16 Servo motor Controller Board
- Add to cart
-
- Out of Stock
- DC Motors
Mini Vibration Motor
- 33.00 EGP
- Read more
-
-
- Pumps
Mini Water Pump 3-6V DC
- 95.00 EGP
- This is a low cost, small size Submersible Pump Motor which can be operated from a 2.5 ~ 6V power supply. It can take up to 120 liters per hour with very low current consumption of 220mA. Just connect tube pipe to the motor outlet, submerge it in water and power it. Make sure that the water level is always…
- Add to cart
-
- Out of Stock
- DC Motors
MiniQ Motor Wheel Set
- 250.00 EGP
- This MiniQ motor wheel set is especially designed for education and hobbies. It features a powerful metal gear motors which provide a speedy robot. Easily for assembling to the chassis.
- Read more
-
-
- Motors Accessories
NEMA 17 Cable 1M 4Pin to 6Pin XH2.54mm
- 75.00 EGP
- New stepper motor cable for the most common NEMA 17 steppers found on 3D printers.
- Add to cart
-
- Out of Stock
- Motors Accessories
NEMA 17 STEPPER STEEL AND RUBBER VIBRATION DAMPER
- 20.00 EGP
- Read more
-
-
- Fan
Plastic Fan Housing
- 25.00 EGP
- Plastic Fan Housing
- Add to cart
-
- Out of Stock
- Pumps
Pump 12V 6.8 Bar
- 200.00 EGP
- Read more
-
-
- Out of Stock
- Servo Motors
S3003 Servo Motor
- 160.00 EGP
- This is the Futaba S3003 Standard Servo.This basic servo is used in cars, boats, or where standard servos are used.This is the replacement for the following servos, S138,S148,S22,S38 and S12.This servo can produce high-current draw from your batteries.If using NiMH or LiPo batteries, make sure they are capableof delivering sufficient amps.
- Read more
-
-
- Servo Motors
Servo Motor Micro (180) 1.6 kg.cm Plastic Gears “SG90”
- 90.00 EGP
- Sg90 Servo Motor The SG90 is a small-sized, low-cost servo motor that is commonly used in small-scale projects and hobbyist applications. It is a popular choice among students, hobbyists, and DIY enthusiasts due to its affordability and ease of use. The SG90 is a type of rotary actuator that is capable of precise angular positioning and speed control. Specifications: Operating Voltage: 4.8V - 6V DC…
- Add to cart
-
- Motors, Servo Motors
Servo Motor Micro (360) 1.6 kg.cm Plastic Gears “SG90”
- 115.00 EGP
- The SG90 – 360 degree continuous rotation servo is a micro size analog servo. PACKAGE INCLUDES: 1 SG90 360 Degree Continuous Rotation Servo motor with attached 9.5″ control cable 3 arms/horns for various interface applications Screws for mounting arms to the servo and mounting the servo
- Add to cart
-
- Out of Stock
- DC Motors
Small 12V DC Motor
- 11.00 EGP
- Small 12V DC Motor
- Read more
-
-
- Out of Stock
- DC Motors
Small 5V DC Motor
- 11.00 EGP
- Small 5V DC Motor
- Read more
-
-
- Out of Stock
- DC Motors
Small 6V DC Motor
- 5.50 EGP
- Small 6V DC Motor
- Read more
-
-
- Out of Stock
- DC Motors
Small 9V DC Motor
- 15.00 EGP
- Small 9V DC Motor
- Read more
-
-
- Stepper Motors
Stepper Motor (NEMA 17) 17HS4401 – New
- 550.00 EGP
- 17HS4401 NEMA 17 Stepper Motor For 3D Printer
- Add to cart
-
- Out of Stock
- Motors Accessories
Stepper Motor Base Mount NEMA 17 Size (42)
- 40.00 EGP
- This mount will fit NEMA-17 motor. Made of steel with welded 90-degree support triangles, its got a solid construction
- Read more
-
-
- Motors Accessories
Stepper Motor Base Mount NEMA 23 Size (57)
- 88.00 EGP
- This mount will fit NEMA-23 motor, Made of steel with welded 90-degree support triangles, its got a solid construction
- Add to cart
-
- Motor Drivers
Stepper Motor ULN2003 Driver Module
- 35.00 EGP
- The ULN2003 stepper motor driver PCB provides a direct drive interface between your microcontroller and stepper motor. The PCB provides 4 inputs for connection to your microcontroller, power supply connection for the stepper motor voltage, and ON/OFF jumper, a direct connect stepper motor header and 4 LEDs to indicate stepping state
- Add to cart
-
- Motor Drivers
TB6560 CNC 3 AXIS STEPPER MOTOR DRIVER CONTROLLER BOARD FOR MACH3 KCAM4 EMC2 36V
- 1,200.00 EGP
- TB6560 CNC 3 AXIS STEPPER MOTOR DRIVER CONTROLLER BOARD FOR MACH3 KCAM4 EMC2 36V
- Add to cart
-
- Out of Stock
- Motor Drivers
TB6560 CNC 3-Axis Driver 3.5A
- 825.00 EGP
- TB6560 stepper motor driver can drive up to 3 stepper motors with 3.5 A peak current for each motor. It is also equipped with spindle relay output and can handle a spindle. It has micro-stepping capability up to 1/16 micro-step. The driver is integrated with break output board (so you do not need one) and can be connected directly to…
- Read more
-
-
- Motor Drivers
TB6560 Stepper Motor Driver
- 550.00 EGP
- TB6560 Stepper Motor Driver
- Add to cart
-
- Pumps
Water Pump12Vdc Ultra-Quiet Brushless 240L/H
- 475.00 EGP
- This is a compact size submersible water pump(none self-prime). It's built by a brush-less motor providing smooth and quiet operation than a non-breathless water pump.
- Add to cart
