-
IBT-2 Motor Driver 43A
IBT-2 43A H-Bridge Motor Driver Module the drive uses an H-bridge driver module that composed by Infineon power drive chip BTS7960, with overheating and overcurrent protection.
motor driver H-bridge driver circuit, with strong drive and braking effect, use 74HC244 chip effectively isolate the microcontroller and the motor drive High Current up to 43A
IBT-2 motor driver is a fully integrated high current H bridge module for motor drive applications.
Interfacing to a microcontroller is made easy by the integrated driver IC which features logic level inputs, diagnosis with current sense, slew rate adjustment, dead time generation and protection against overtemperature, overvoltage, under voltage, overcurrent and short circuit.
provides a cost optimized solution for protected high current PWM motor drives with very low board space consumption.
The 43a motor driver IBT-2 H-bridge module is an inexpensive, high power motor driver based on two BTS7960 chips
This driver 43a motor driver uses two high current half bridge Infineon BTS 7960 chip for motor drive applications. Interfacing to a microcontroller is made easy using this driver which features current sensing, slew rate adjustment and protection against over temperature, overvoltage, under voltage, over current and short circuit.
This small size driver provides a cost optimized solution for protected high current PWM motor drives.
275.00 EGPIBT-2 Motor Driver 43A
275.00 EGP -
4 Channel 5V Relay Module Board Shield for Arduino
4 Channel 5V Relay Module Board Shield for Arduino
- This 5V 4 Relay Shield Module is a small current signal control power equipment commonly used electronic module
- Enabling high-power single-chip control devices are widely used in SCM system to make smart home project
- Can be directly plugged into the compatible the use of various types of motherboards, eliminating the patch cable troubles.
- This relay module is 5V active low.
- It is a 4-channel relay interface board, which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, PLC, etc.
- It is also able to control various appliances and other equipment with large current. Standard interface can be directly connected with microcontrollers.
- Red working status indicator lights are conducive to the safe use.
- Widely used for all MCU control, industrial sector, PLC control, and smart home control.
- Working voltage: 5V
- Channel: 4 channel
- Color: Blue
- Item size: approx. 7.1 x 5 x 1.3cm
- Net weight: 41.3g
275.00 EGP -
MAX6675 Module for Thermocouple K Type
This K Type Thermocouple can be used to measure temperatures up to 600 degree Celsius! Great for industrial projects, 3D Printers, DIY and hobby projects which require a high temperature to be measured.
285.00 EGPMAX6675 Module for Thermocouple K Type
285.00 EGP -
Boost Step-up Power Module High-voltage Generator DC 3V-6V to 1000KV
Boost Step-up Power Module
300.00 EGP -
Xbee 2Mw 120M
xbee XB24-Z7WIT-004 module from Digi. Series 2 improves on the power output and data protocol.
Series 2 modules allow you to create complex mesh networks based on the Xbee ZB ZigBee mesh firmware.
These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.
These are essentially the same hardware as the older Series 2.5 but have updated firmware.
They will work with Series 2.5 modules if you update the firmware through X-CTU
330.00 EGPXbee 2Mw 120M
330.00 EGP -
ESP8266 WiFi 4 channel Relay Module
DC 12V ESP8266 4 channel relay board ESP-01 WIFI module 4 channel WIFI relay module for smart home smart furniture
450.00 EGPESP8266 WiFi 4 channel Relay Module
450.00 EGP -
-
A9G Development Board Module (GPS GSM GPRS)
ORIGINAL AI-THINKER A9G GSM/GPRS+GPS/BDS DEVELOPMENT BOARD SMS VOICE WIRELESS DATA TRANSMISSION + POSITIONING
1,200.00 EGPA9G Development Board Module (GPS GSM GPRS)
1,200.00 EGP -
2.8inch TFT LCD Module + Mini V3 STM32F103RBT6 Development Board + USB Cable
-
2.8inch LCD Module + USB Cable
-
Type: TFT
-
Model Number: MINI-STM32
-
CPU: STM32F103RBT6
1,250.00 EGP -
Shop By Department
- Arduino Shields
- Audio and Sound
- Batteries & Accessories
- Cables/Wires
- Classic Control Components
- Components
- Developments Boards
- Integrated Circuits
- Light Source and Display
- Mechanical Parts
- Measuring Devices
- Modules
- Motors
- Power Sources
- Programmers
- Robotics
- Sensors
- Switches
- Tools
- Terminals & Connectors
- Inverters
- Camera
- Mobile Accessories