-
Relay Module 2 Channel 12V (high/low) level trigger
This is a HIGH/LOW Level 12V 2-channel relay interface board, and each channel needs a 20mA driver current. It can be used to control various appliances and equipment with large current. It is equipped with high-current relays that work under AC 250V 10A or DC 30V 10A. It has a standard interface that can be controlled directly by microcontroller
85.00 EGP -
Wemos NodeMCU V3 ESP8266 340G WIFI Module With Extra Memory 32M Flash
Wemos NodeMCU V3 ESP8266 340G WIFI Module With Extra Memory 32M Flash module is based on widely explored esp8266 System on Chip from Expressif.
120.00 EGP -
Lithium Battery Charging Protection Module MH-CD42 2.1A 5V
MH-CD42 DC 5V 2.1A Mobile Power Diy Board 4.2V Charge/Discharge(boost)/battery protection/indicator module 3.7V lithium 18650
65.00 EGP -
5V 2A Wireless Charger Module
5V 2A Large Current Wireless Charger Module Wireless Power Supply Module Transmitter Receiver Charging Coil Module
320.00 EGP5V 2A Wireless Charger Module
320.00 EGP -
Led Matrix 8×8 With MAX7219 Module
The MAX7219 Dot Led Matrix Module is a serial input common-cathode driver that interfaces micro-controllers to LED matrices
50.00 EGPLed Matrix 8×8 With MAX7219 Module
50.00 EGP -
Lcd Touch Module 2.8 Inch Tft Shield For Arduino Uno
Lcd Touch Module
280.00 EGP -
HW-183 Board DC-DC Step Up Power Module 2A B6287
HW-183 Board DC-DC Step Up Power Module 2A B6287
- The whole network’s smallest adjustable boost module can be easily installed in a variety of small equipment.
- The module supports Micro USB input, a USB charger or mobile power supply can easily get to it 9V, 12V, 15V, 18V, 24V, easy to use.
32.00 EGP -
ESP8266 WiFi 4 channel Relay Module
DC 12V ESP8266 4 channel relay board ESP-01 WIFI module 4 channel WIFI relay module for smart home smart furniture
450.00 EGPESP8266 WiFi 4 channel Relay Module
450.00 EGP -
Inverter Module DC 12V to AC 110V 175V 220V – 150W
150W converter DC 12V TO AC 220V inverter boost module step up board
170.00 EGP -
Mini MP1584EN DC-DC Buck Adjustable Step Down Module 4.5V-28V Input 0.8V-20V Output
The Mini MP1584 DC-DC 3A Adjustable Buck module is ultra small adjustable 0.8V to 20V output DC to DC Buck converter uses an MP1584EN high frequency switching regulator and integrated high voltage power MOSFET.
30.00 EGP -
ESP8266 ESP-12F Wifi Transceiver Wireless Module
The Latest ESP-12F ESP8266 Wi-Fi Module AP & Station Remote Serial Wireless IoT Board is an integrated chip designed for the needs of a new connected world.
It can handle all the necessary overhead for communicating with your network, such as TCP/IP stack and communicating with your 802.11 networks.
It is completely addressable over SPI and UART protocols allowing you to connect your sensors or project directly to it through its GPIO’s. ESP8266 is a low-cost Wi-Fi chip with a full TCP/IP stack and MCU (Micro Controller Unit) capability.
ESP8266 Serial Wi-Fi Wireless Transceiver Module is a self-contained SOC with an integrated TCP/IP protocol stack that can give any microcontroller access to your Wi-Fi network.
ESP8266 Serial Wifi Wireless Transceiver Module is capable of either hosting an application or offloading all Wi-Fi networking functions from another application processor.
Each ESP8266 module comes pre-programmed with an AT command set firmware, meaning, you can simply hook this up to your Arduino device and get about as much Wi-Fi-ability as a Wi-Fi Shield offers.
The ESP8266 module is an extremely cost-effective board with a huge, and ever-growing, community.
ESP8266 Serial Wi-Fi Wireless Transceiver Module has a powerful enough onboard processing and storage capability that allows it to be integrated with the sensors and other application-specific devices through its GPIOs with minimal development up-front and minimal loading during runtime.
Its high degree of on-chip integration allows for minimal external circuitry, including the front-end module, which is designed to occupy a minimal PCB area.
The ESP8266 supports APSD for VoIP applications and Bluetooth co-existence interfaces, it contains a self-calibrated RF allowing it to work under all operating conditions and requires no external RF parts.
185.00 EGP
Shop By Department
- Arduino Shields
- Audio and Sound
- Batteries & Accessories
- Cables/Wires
- Classic Control Components
- Components
- Developments Boards
- Integrated Circuits
- Light Source and Display
- Mechanical Parts
- Measuring Devices
- Modules
- Motors
- Power Sources
- Programmers
- Robotics
- Sensors
- Switches
- Tools
- Terminals & Connectors
- Inverters
- Camera
- Mobile Accessories