-
-
-
Arduino Pro Mini
The Arduino Pro Mini is a microcontroller board based on the ATmega328.
It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, an on-board resonator, a reset button, and holes for mounting pin headers. A six pin header can be connected to an FTDI cable or Sparkfun breakout board to provide USB power and communication to the board.175.00 EGPArduino Pro Mini
175.00 EGP -
Arduino Uno Case – Black Plastic
The Arduino Uno is the undisputed champion of all development boards, why would you not want to keep your board safe and sound inside this black opaque plastic enclosure? These cases protect your Arduino Uno from things like rogue wires that might short it out while still allowing full access to the board! Simply snap the Uno into the bottom half of the enclosure, then snap the two sides together.
55.00 EGPArduino Uno Case – Black Plastic
55.00 EGP -
Arduino UNO R3 Box Case Shell
Arduino CASE Transparent ACRYLIC Case Arduino Uno R3 Case Protective Shell Gloss Plastic Box Water Clear Cover Acrylic Enclosure Arduino Uno R3 Case
33.00 EGPArduino UNO R3 Box Case Shell
33.00 EGP -
Arduino Uno R3 Italy
This is the new Arduino Uno R3.
In addition to all the features of the previous board, the Uno now uses an ATmega16U2 instead of the 8U2 found on the Uno (or the FTDI found on previous generations).
This allows for faster transfer rates and more memory. No drivers needed for Linux or Mac (inf file for Windows is needed and included in the Arduino IDE), and the ability to have the Uno show up as a keyboard, mouse, joystick, etc.
The Uno R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes. The Uno R3 works with all existing shields but can adapt to new shields which use these additional pins.
Note: The Arduino Uno R3 requires the Arduino 1.0 driver’s folder in order to install properly on some computers. We have tested and confirmed that the R3 can be programmed in older versions of the IDE. However, the first time using the R3 on a new computer, you will need to have Arduino 1.0 installed on that machine.
500.00 EGPArduino Uno R3 Italy
500.00 EGP -
Arduino Uno SMD China
The Arduino Uno SMD module is a compact and lightweight microcontroller board that packs a lot of features into a small package. Here are some of its key features:
- ATmega328P Microcontroller: The heart of the Arduino Uno SMD module is the ATmega328P microcontroller, which provides 32KB of flash memory and 2KB of SRAM. This powerful chip can handle a wide range of tasks, from controlling motors and sensors to running complex algorithms.
- USB Connectivity: The Arduino Uno SMD module features a built-in USB port, which makes it easy to connect to your computer and upload code. You can also use the USB port to power the board, so you don’t need a separate power source.
- Pin Headers: The Arduino Uno SMD module has a total of 14 digital input/output pins, 6 analog inputs, and a number of other pins for power and ground. These pin headers make it easy to connect sensors, actuators, and other components to the board.
- Wide Compatibility: The Arduino Uno SMD module is compatible with a wide range of software and hardware, including the Arduino IDE, which makes it easy to program even if you’re new to microcontrollers. It also supports a variety of communication protocols, such as I2C, SPI, and UART.
350.00 EGPArduino Uno SMD China
350.00 EGP -
Arduino Yun Orginal
Arduino Yun Orginal
1,850.00 EGP1,900.00 EGPArduino Yun Orginal
1,850.00 EGP1,900.00 EGP -
125.00 EGP
Attiny85 Arduino Micro Development Board
125.00 EGP -
ATTINY85 Digispark kickstarter mini USB Development Board
The attiny85 based mini development board is similar to the Arduino, but cheaper and smaller (of course a bit less powerful)
115.00 EGP -
Beaglebone Black BB-Black
BeagleBone Black
is a low-cost, community-supported development platform for developers and hobbyists.
Boot Linux in under 10 seconds and get started on development in less than 5 minutes with just a single USB cable.
3,200.00 EGPBeaglebone Black BB-Black
3,200.00 EGP -
Cubieboard A20
The cubie A20 uses an Allwinner A20 processor which has a dual core CPU and twice GPU performance.
1,200.00 EGP1,650.00 EGPCubieboard A20
1,200.00 EGP1,650.00 EGP
Shop By Department
- Arduino Shields
- Audio and Sound
- Batteries & Accessories
- Cables/Wires
- Classic Control Components
- Components
- Developments Boards
- Integrated Circuits
- Light Source and Display
- Mechanical Parts
- Measuring Devices
- Modules
- Motors
- Power Sources
- Programmers
- Robotics
- Sensors
- Switches
- Tools
- Terminals & Connectors
- Inverters
- Camera
- Mobile Accessories