Search Results for "motor"
-
Micromake Makeboard Mini 3D Printer Control Board Support Heatbed Compatible with RAMPS 1.4
Micromakeآ® Makeboard Mini 3D Printer Control Board Support Heatbed Compatible with RAMPS 1.4
650.00 EGP715.00 EGP -
High-power MOSFET Trigger Switch Drive Module
High-power MOSFET Trigger Switch Drive Module
50.00 EGP -
5x5x25mm Flexible Movement Coupling
Connect motor shaft to anything else with a set-screw coupler. These couplers are made of machined aluminum and have a spiral cut that makes them slightly flexible so they can be fit to two shafts even if they are not perfectly co-linear and will help reduce bending effects.
The way they are cut, create a spring effect in the X Y & Z linear axis but not in the rotational axis. That means that you will not get increased backlash – so they’re suitable for precision CNC work.
This coupler will connect two shafts of 5mm diameter. Comes with two sets of double set-screws (two per side) for secure attachment. You’ll need a 2mm allen wrench to tighten/loosen the set-screws.
56.00 EGP5x5x25mm Flexible Movement Coupling
56.00 EGP -
NE555 Adjustable Frequency Pulse Generator Module
This is a square wave pulse generator module based on the ubiquitous NE555 timer IC. The module can be powered from a wide power supply range (5 to 12V) and will produce a continuous square wave output between 4Hz to 1.3KHz which can be set by on on-board multi-turn potentiometer. Module has ten-turn frequency adjustment control and power on LED. Useful for applications where an approximate frequency clock source is required such as for stepper motor step generation etc
35.00 EGP -
MEGA Arduino Sensor Shield V2.0
This sensor shield v2.0 allows you to hoop up the sensors directly to Arduino mega (1280) or (2560) or (ADK) without the use of the breadboard.
It also expands the Arduino with Bluetooth module communication interface, SD card module communication interface, APC220 radio-frequency module communication interface, RB URF v1.1 ultrasonic sensor interface and ICSP interface. easy to use for extension.
250.00 EGPMEGA Arduino Sensor Shield V2.0
250.00 EGP -
-
Tracing Car Rover 5
If you’re looking for a base for your next robot, look no further than the Rover 5. The Rover 5 uses 2 independent motors,The entire gearbox assembly can be rotated at 5 degree increments for different clearance configurations. You can even replace the tank treads with traditional wheels
770.00 EGPTracing Car Rover 5
770.00 EGP -
Six Degrees Of Freedom Mechanical Arm + 32 Way Control Board + Ps2
The robotic arm is an automated mechanical device that is more extensive applied in robot technology areas. Currently, you can see it in industrial manufacturing, medical treatment, entertainment services, teaching application, military areas and space exploration. Although everyone see often in movies or television, and want to have one belongs to oneself.
4,620.00 EGP -
Mk8 Extruder 0.4mm Nozzle Print Head 1.75 Filament For 3D Printer
This is an MK8 extruder, which features outstanding quality and better performance for 3D printers.
The feeding device of this MK8 extruder uses double “V” design which can ensure stable and constant feeding, and such design is much more convenient for you to load the filament right to the end of the barrel.
523.00 EGP -
ULN2003 (NPN Darlington Transistors 7- Array )
ULN2003 DIP
9.00 EGP -
TLP250 DIP Integrated Circuit
TLP250 DIP Integrated Circuit
The TLP250 is a photocoupler IC (integrated circuit) in a DIP (dual inline package) format. It is commonly used for isolated control and signal transmission in various electronic circuits, such as power supplies, motor control circuits, and industrial equipment.
Here are the full specifications of the TLP250 DIP IC:
- Isolation voltage: 5000 Vrms (minimum)
- Peak output current: ±2.5 A (maximum)
- Supply voltage: 10 V to 30 V
- Input current: 10 mA (maximum)
- Input voltage: 0.5 V to 1.5 V
- Switching speed: 0.5 µs (maximum)
- Operating temperature: -40°C to +100°C
- Package type: DIP-8
- Pin configuration:
- Pin 1: Anode of LED (positive)
- Pin 2: Cathode of LED (negative)
- Pin 3: Emitter of phototransistor
- Pin 4: Collector of phototransistor
- Pin 5: Not connected (NC)
- Pin 6: Vcc (positive supply voltage)
- Pin 7: Vo (output)
- Pin 8: GND (ground)
55.00 EGPTLP250 DIP Integrated Circuit
55.00 EGP -