-
Breadboard-Mini Modular 170 Tie Point Green
This solderless breadboard has 17 rows of tie points, enough for up to two 14- or 16-pin DIP ICs. Although it is difficult to see in the pictures, the rows and columns are conveniently labeled. The board features an adhesive backing and two mounting holes, and tabs allow multiple units to be connected for larger projects. This breadboard is red and will add a splash of color to your project; other colors are also available.
15.00 EGP -
Breadboard-Mini Modular 170 Tie Point Red
This solderless breadboard has 17 rows of tie points, enough for up to two 14- or 16-pin DIP ICs. Although it is difficult to see in the pictures, the rows and columns are conveniently labeled. The board features an adhesive backing and two mounting holes, and tabs allow multiple units to be connected for larger projects. This breadboard is red and will add a splash of color to your project; other colors are also available.
15.00 EGP -
Breadboard-Mini Modular 170 Tie Point Yellow
This solderless breadboard has 17 rows of tie points, enough for up to two 14- or 16-pin DIP ICs. Although it is difficult to see in the pictures, the rows and columns are conveniently labeled. The board features an adhesive backing and two mounting holes, and tabs allow multiple units to be connected for larger projects. This breadboard is red and will add a splash of color to your project; other colors are also available.
15.00 EGP -
Breadboard-Mini Modular 170 Tie Point Black
This solderless breadboard has 17 rows of tie points, enough for up to two 14- or 16-pin DIP ICs. Although it is difficult to see in the pictures, the rows and columns are conveniently labeled. The board features an adhesive backing and two mounting holes, and tabs allow multiple units to be connected for larger projects. This breadboard is red and will add a splash of color to your project; other colors are also available
15.00 EGP -
Arduino Mega 2560 Pro Embed CH340G – ATmega2560-16AU Development Board
Embedded version of Mega 2560 CH340G / ATmega2560-compatible with Arduino Mega 2560 board. Built in ATmega2560 Atmel microcontroller and CH340G USB-UART interface chip.
1,400.00 EGP -
3D Printer Filament PLA+ eSUN 1.75mm 1Kg Red
eSUN red eSilk PLA filament is a 3D printing material produced by eSUN.
It is a modified version of the standard PLA.
Compared to the original formulation, it contains a bright-effect, polyester-like additive that gives the material a silky and shiny finish 3D Printer Filament PLA
1,150.00 EGP3D Printer Filament PLA+ eSUN 1.75mm 1Kg Red
1,150.00 EGP -
3Amp 4V-16V DC Motor Driver MDD3A (2 Channels)
Looking for a motor driver for your mobile robot? Want to drive a stepper motor? Worry not! MDD3A is able to control two brushed DC motors or single bipolar/unipolar stepper motor from 4V to 16V.
With discrete MOSFETs H-Bridge design, this motor driver is able to support 3 Amp per channel continuously without any additional heatsink.
625.00 EGP -
3M660-N Microstep Driver
3M660 is a constant torque microstepping driver, voltage range from 24-58VDC, it’s suitable for various 3-phase NEMA23 & NEMA34 hybrid stepper motorWith the build-in constant current chopping circuit similar to servo driver, the motor run stable without vibration and noise in low speed.
990.00 EGP3M660-N Microstep Driver
990.00 EGP -
1.3″ OLED 7 Pins Display – White 128X64
OLED 128×64 dot matrix display module. The characteristics of this display module are high brightness, self-emission, high contrast ratio, slim/thin outline, wide viewing angle, wide temperature range and low power consumption.
165.00 EGP1.3″ OLED 7 Pins Display – White 128X64
165.00 EGP -
HW-069 4 Digits 7 Segment Display Module with 0.36Inch Time Clock TM1637 Driver
The module is a 12-pin display module with a 4-point common digital tube (0.36 inch) with a clock point.The driver chip is TM1637.
It only needs 2 signal lines to enable the MCU to control the 4-bit 8-segment digital tube
45.00 EGP -
Cytron Dual Channel 10A DC Motor Driver Rev 2.0 – MDD10A (10A Each Channel)
This is a dual motor driver which is designed to drive 2 DC motor with high current up to 10A continuously and 30A peak. The driver works in the voltage range from 5 to 25 V. It also includes a fast test switch for driver testing.
This driver supports locked-antiphase and sign-magnitude PWM signal. It uses full solid-state components which result in faster response time and eliminate the wear and tear of the mechanical relay Cytron Dual Channel
1,350.00 EGP
Shop By Department
- Arduino Shields
- Audio and Sound
- Batteries & Accessories
- Cables/Wires
- Classic Control Components
- Components
- Developments Boards
- Integrated Circuits
- Light Source and Display
- Mechanical Parts
- Measuring Devices
- Modules
- Motors
- Power Sources
- Programmers
- Robotics
- Sensors
- Switches
- Tools
- Terminals & Connectors
- Inverters
- Camera
- Mobile Accessories