Search Results for "PCB"
-
3S (BMS) Lithium Battery Charger Protection Module 25A 12V
3S (BMS) Lithium Battery Charger Protection Module 25A 12V
The 3S (BMS) Lithium Battery Charger Protection Module 25A 12V is a specialized module designed for the protection and charging of 3-cell lithium-ion or lithium-polymer batteries. It operates with a 12V input and has a 25A maximum current output capacity. This module ensures the safety of the battery during charging by offering protection against overcharging, over-discharging, overcurrent, and short circuits. It incorporates a Battery Management System (BMS) that actively monitors the battery’s voltage levels and temperature to prevent potential damage or hazards. Its main functions include maintaining balanced charging among cells and providing a reliable and efficient charging solution for 3-cell lithium batteries at a 12V input level.
210.00 EGP -
Joker PASTE Flux 30g Metal Can
Tin Soldering PASTE Flux 30g for Repairing Electronics, Electrical Appliances, PCs, Mobiles and Automotive.
44.00 EGPJoker PASTE Flux 30g Metal Can
44.00 EGP -
Led Matrix 8×8 With MAX7219 Module
The MAX7219 Dot Led Matrix Module is a serial input common-cathode driver that interfaces micro-controllers to LED matrices
50.00 EGPLed Matrix 8×8 With MAX7219 Module
50.00 EGP -
3D Printer Ultimaker V. 1.5.7 Pcb Compatible With Ramps Arduino Mega 2560 R3
The Ultimaker 1.5.7 board is an Arduino Mega shield, geared for the DIY 3D printer market and has some great features not found on the RAMPS compatible boards such as higher input voltage ability and power connectivity options.
Controls up to 5 stepper motors and Compatible with Pololu stepper driver boards 3D Printer Ultimaker
390.00 EGP450.00 EGP3D Printer Ultimaker V. 1.5.7 Pcb Compatible With Ramps Arduino Mega 2560 R3
390.00 EGP450.00 EGP -
Cytron 20Amp 6V-30V DC Motor Driver MD20A
The MD20A enables bidirectional control of one high-power brushed DC motor from 6V to 30V. With discrete NMOS H-Bridge design, this motor driver is able to support 20Amp continuously without any heatsink.
690.00 EGPCytron 20Amp 6V-30V DC Motor Driver MD20A
690.00 EGP -
Computer IC Chips WiFi Shield for Arduino Compatible With MICROCHIP MRF24WB0MA
Computer IC Chips WiFi Shield
280.00 EGP770.00 EGPComputer IC Chips WiFi Shield for Arduino Compatible With MICROCHIP MRF24WB0MA
280.00 EGP770.00 EGP -
-
Friendly ARM Tiny210 CPU Board
Friendly ARM Tiny210 CPU Board + SDK Board (V. 1309 and 1312) + 4.3″ Resistive LCD 1MHz Tiny210 ARM Cortex A8 Linux System.
The Tiny210 CPU board is designed and developed by FriendlyElec. It uses the Cortex embedded processing board and Samsung S5PV210 system chip (SOC).
The maximum frequency is 1 GHz. The S5PV210 integrates the Power Vr graphics engine of SGX540 hardware, which supports 3D and can drive video playback screens up to 1080P.
The Tiny210 CPU board has 2.0mm spacing double row pitch headers that allow Tiny210 to be connected to a carrier board and extend most of the CPU’s pins to work on both the Tiny210 and Tiny6410 carrier boards. The standard version integrates 512M DDR2 RAM and 512M Flash (1G Flash optional) and can run Android, Linux and WinCE6. These easily and widely used in mid-range development, Android notepad, auto electronics, industrial applications, GPS systems and multimedia systems.
6,500.00 EGPFriendly ARM Tiny210 CPU Board
6,500.00 EGP -
Friendly Arm Tiny 6410
Smart210 is a highly integrated, high-performance Cortex-A8 core board designed, manufactured and distributed by the friendly arm of Guangzhou. Both use Samsung S5PV210 as the main processor, which can run at up to 1GHz. The S5PV210 integrates PowerVR SGX540 high-performance graphics engine, supports smooth 3D graphics operation, and can play 1080P large-size HD videos.
The Smart210 core board uses 2.0mm pitch double-row pins (P1, P2, P3, P4) with a size of 74x55mm, which leads to a total of 208Pin pins. Among them, the P1 and P2 pin headers are standard welding, which already contains most of the commonly used functions; P3 and P4 air welding, which is convenient for users to expand and use. The Smart210 board integrates a network card and a sound card chip, which is very suitable for enterprise users to carry out rapid product design or project development. The core board comes standard with 512M memory and 512M high-performance SLC flash memory (another 1GB optional).
Smart210SDK is a reference design baseboard for Smart210. It comes with a variety of common standard interfaces, such as HDMI output, USB Host, SD card, DB9 serial port, RJ-45 Ethernet port, audio input and output ports, etc., and some on-board resources. Test devices such as EEPROM, buzzer, buttons, GPIO port, SDIO port, etc., so that users can comprehensively evaluate and use the core board. In terms of layout, we try to consider that LCD modules of common sizes can be fixed on the backplane, such as 3.5 “, 4.3”, 5 “, 7” LCD, etc., so that users will not stir various wires together during use. , And increase the portability of the development kit.
We also fully took advantage of the 210 support for SD card booting, and carefully developed a powerful Superboot-210, which does not require a computer connection, as long as the system ROM is copied to the SD card (supporting high-speed large-capacity cards up to 32G) You can quickly and easily install a variety of embedded systems (WindowsCE6 / Linux / Android / Ubuntu / uCos2 or bare metal programs, etc.); this is very suitable for enterprise users for mass production and field upgrades to update the system !
Keeping pace with the development of the times, we have also developed a new USB download tool MiniTools using cross-platform Qt4. With Superboot, users can brush the board like a mobile phone. It uses the world’s universal Fastboot low-level driver, so you can take almost All Windows systems (including 32 / bit-bit machines), and can support various distributions of Linux, such as Fedora, Ubuntu and other systems.
With MiniTools, no serial connection is required, as long as the USB, users can select single or multiple system image files, download and flash in one go, and truly realize one-click flashing; In addition, MiniTools also supports download to memory operation and one-click quick start function Therefore, MiniTools is also very suitable for developers to quickly debug and develop !3,300.00 EGPFriendly Arm Tiny 6410
3,300.00 EGP -
PCB Gp Double Layer 100×60 cm
PCB Gp Double Layer 100×60 cm
2,300.00 EGPPCB Gp Double Layer 100×60 cm
2,300.00 EGP -
2,298.63 EGP
EDU:BIT Training & Project Kit for micro:bit
2,298.63 EGP