-
ESP8266 5V Wifi Relay Module 1 Channel
5V WiFi relay module carried an ESP8266 WiFi module and microcontroller.It will send the serial port instructions to the cell phone APP and Implementation within the local area network (LAN) for wireless control relay.
200.00 EGPESP8266 5V Wifi Relay Module 1 Channel
200.00 EGP -
Relay Module 8 Channel 5V
This is a 5V 8-Channels Relay module, It can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM and MSP430.
8 relays are included in this module, with “NC” ports means “Normally connected to COM” and “NO” ports means “Normally open to COM”. This module also equipped with 8 LEDS to show the status of relays
195.00 EGPRelay Module 8 Channel 5V
195.00 EGP -
Nrf24L01+Pa+Lna 1KM Distance Wireless Transceiver (2DB Antenna)
This 2.4GHZ NRF24L01 Module with PA LNA SMA Antenna use 2.4 GHz transceiver from Nordic Semiconductor, the nRF24L01+PA+LNA. This transceiver IC operates in the 2.4 GHz band and has many new features. Take all the coolness of the nRF2401A and add some extra pipelines, buffers, and an auto-re-transmit feature.
193.00 EGP -
Xbee 5V/3.3V Adapter Board
This low cost XBee 3.3-5V Adapter Board comes in partially assembled kit form and provides a cost-effective solution for interfacing your microcontroller to any XBee or XBee Pro module (see Associated Modules below). A voltage regulator and 74LVC244A buffer is included onboard for safe interfacing to a 5 V supply, allowing for easy compatibility with any Parallax microcontroller.
190.00 EGP220.00 EGPXbee 5V/3.3V Adapter Board
190.00 EGP220.00 EGP -
ESP8266 ESP-12F Wifi Transceiver Wireless Module
The Latest ESP-12F ESP8266 Wi-Fi Module AP & Station Remote Serial Wireless IoT Board is an integrated chip designed for the needs of a new connected world.
It can handle all the necessary overhead for communicating with your network, such as TCP/IP stack and communicating with your 802.11 networks.
It is completely addressable over SPI and UART protocols allowing you to connect your sensors or project directly to it through its GPIO’s. ESP8266 is a low-cost Wi-Fi chip with a full TCP/IP stack and MCU (Micro Controller Unit) capability.
ESP8266 Serial Wi-Fi Wireless Transceiver Module is a self-contained SOC with an integrated TCP/IP protocol stack that can give any microcontroller access to your Wi-Fi network.
ESP8266 Serial Wifi Wireless Transceiver Module is capable of either hosting an application or offloading all Wi-Fi networking functions from another application processor.
Each ESP8266 module comes pre-programmed with an AT command set firmware, meaning, you can simply hook this up to your Arduino device and get about as much Wi-Fi-ability as a Wi-Fi Shield offers.
The ESP8266 module is an extremely cost-effective board with a huge, and ever-growing, community.
ESP8266 Serial Wi-Fi Wireless Transceiver Module has a powerful enough onboard processing and storage capability that allows it to be integrated with the sensors and other application-specific devices through its GPIOs with minimal development up-front and minimal loading during runtime.
Its high degree of on-chip integration allows for minimal external circuitry, including the front-end module, which is designed to occupy a minimal PCB area.
The ESP8266 supports APSD for VoIP applications and Bluetooth co-existence interfaces, it contains a self-calibrated RF allowing it to work under all operating conditions and requires no external RF parts.
185.00 EGP -
GY-61 DXL335 3-Axis Accelerometer Module
GY-61 ADXL335 Module is a small, thin, low-power, complete 3-axis accelerometer with signal conditioned voltage outputs.
The ADXL335 Module 3-axis Analog Output Accelerometer measures acceleration with a minimum full-scale range of ±3 g.
It can measure the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion, shock, or vibration.
This breakout board comes with an onboard voltage regulator and works at both 3.3V & 5V (3-5V).
An accelerometer is an electro-mechanical device that will measure acceleration forces.
These forces may be static, like the constant force of gravity pulling at your feet, or they could be dynamic – caused by moving or vibrating the accelerometer.
180.00 EGPGY-61 DXL335 3-Axis Accelerometer Module
180.00 EGP -
TF/U Disk MP3 Format Decoder Board Amplifier Module
TF/U Disk MP3 Format Decoder Board Amplifier Module
175.00 EGP -
RFID 125Khz
125Khz RFID module is the most popular RFID module. By connecting this RFID module to Arduino or Raspberry Pi, you are able to build projects that can be used in office/home security, personal identification, access control, anti-forgery, interactive toy and production control systems, etc.
175.00 EGPRFID 125Khz
175.00 EGP -
RFID 125Khz without Tag
RDM 125KHz card mini-module is designed for reading code from 125KHz card compatible read-only tags and read/write card . It can be applied in office/home security, personal identification, access control, anti-forgery, interactive toy and production control systems etc.
155.00 EGPRFID 125Khz without Tag
155.00 EGP -
-
3 Axis Digital Gyroscope Sensor Module GY-50 L3G4200
The L3G4200D has a full scale of +/-250 / +/-500 / +/-2000 dps and is capable of measuring rates with a user-selectable bandwidth.These work great in gaming and virtual reality input devices, GPS navigation systems and robotics.With the given Arduino library, you can easliy setup your project as you get this product.
150.00 EGP
Shop By Department
- Arduino Shields
- Audio and Sound
- Batteries & Accessories
- Cables/Wires
- Classic Control Components
- Components
- Developments Boards
- Integrated Circuits
- Light Source and Display
- Mechanical Parts
- Measuring Devices
- Modules
- Motors
- Power Sources
- Programmers
- Robotics
- Sensors
- Switches
- Tools
- Terminals & Connectors
- Inverters
- Camera
- Mobile Accessories