-
- Out of Stock
- Converters
DC-DC Adjustable Step-Down Power Supply Module -XL4005 5A 75W DSN5000
- 48.00 EGP
- XL4005 is a 300KHz fixed frequency PWM buck (step-down) DC/DC converter, capable of driving a 5A load with high efficiency, low ripple and excellent line and load regulation. Requiring a minimum number of external components, the regulator is simple to use and include internal frequency compensation and a fixed-frequency oscillator.
- Read more
-
-
- Sale!
- Bluetooth
Bluetooth Module HC-05 Pinout, AT Commands & Arduino Programming
- Original price was: 235.00 EGP.200.00 EGPCurrent price is: 200.00 EGP.
- Very simple Bluetooth module to connect it with your microcontroller, Arduino, Raspberry Pi, or any MCU board using the TTL UART interface This serial bluetooth module can work as either master or slave. This module also includes the base board, not only the core board, most functions are pre-set, so only the serial port communication is available but it’s more easy to…
- Add to cart
-
- Sale!
- Other Modules
Relay Module (5V-10A) 1Channel Low level trigger
- Original price was: 35.00 EGP.30.00 EGPCurrent price is: 30.00 EGP.
- This 5V 10A Relay Module is a simple yet powerful solution for controlling high-voltage devices with low-voltage microcontroller signals. Featuring a single channel relay with low-level trigger input, it allows you to switch loads up to 10A safely and efficiently.
- Add to cart
-
- Converters
PL2303 USB TTL Converter Module
- 55.00 EGP
- The PL2303 USB to TTL Converter Module is a high-performance USB-to-serial adapter designed for debugging, programming, and communication between computers and microcontrollers or embedded systems. It is widely used for Arduino, Raspberry Pi, ESP8266, STM32, and other microcontroller projects.
- Add to cart
-
- Other Modules
High-power MOSFET Trigger Switch Drive Module
- 40.00 EGP
- High-power MOSFET Trigger Switch Drive Module
- Add to cart
-
- Converters
CP2102 USB 2.0 to TTL UART Serial Converter Module With DTR Pin
- 120.00 EGP
- The CP2102 USB to TTL Serial Converter Module is a compact and powerful interface designed for seamless USB-to-serial communication. Featuring the Silicon Labs CP2102 chipset, this module is ideal for flashing, debugging, and communicating with microcontrollers and other serial devices. Equipped with a DTR (Data Terminal Ready) pin, it supports automatic reset during programming, making it especially useful for flashing…
- Add to cart
-
- Other Modules
I2C Arduino Serial Module For LCD 16*2
- 40.00 EGP
- Simplify your LCD connections with this I2C serial interface module, designed specifically for standard 16x2 character LCD displays. This compact adapter converts the LCD's parallel interface into a simple I2C (I²C) 4-wire connection, drastically reducing wiring complexity and saving precious GPIO pins on your microcontroller.
- Add to cart
-
- Converters
MAX485 TTL To RS485 Converter Module
- 60.00 EGP
- 5V MAX485 TTL To RS485 Converter Module Board For Arduino
- Add to cart
-
- Other Modules
Joystick Module X-Y For Arduino
- 28.00 EGP
- Lots of robotic projects need a joystick. This module offers an affordable solution to that. The Joystick module is similar to analog joysticks found in gamepads. It is made by mounting two potentiometers at a 90 degrees angle. The potentiometers are connected to a short stick centered by springs.
- Add to cart
-
- Out of Stock
- Wireless
ESP8266 ESP-12F Wifi Transceiver Wireless Module
- 170.00 EGP
- The Latest ESP-12F ESP8266 Wi-Fi Module AP & Station Remote Serial Wireless IoT Board is an integrated chip designed for the needs of a new connected world. It can handle all the necessary overhead for communicating with your network, such as TCP/IP stack and communicating with your 802.11 networks. It is completely addressable over SPI and UART protocols allowing you…
- Read more
-
-
- Sale!
- Other Modules
GY-521 MPU6050 Triple 3-Axis Accelerometer Gyroscope I2C
- Original price was: 150.00 EGP.125.00 EGPCurrent price is: 125.00 EGP.
- The GY-521 module is a compact and powerful sensor board based on the MPU6050 chip, which combines a 3-axis accelerometer and a 3-axis gyroscope in a single package. This module is ideal for motion tracking, gesture detection, and stabilization in a wide range of applications including robotics, drones, gaming, and wearable tech.
- Add to cart
-
- Converters
MT3608 2A DC-DC Step Up Boost Converter Module
- 40.00 EGP
- The MT3608 Step-Up Converter Module is a compact and efficient DC-DC boost module designed to step up lower DC voltages to higher levels with high efficiency. Powered by the MT3608 IC, this module is perfect for portable electronics, DIY power supplies, and battery-powered projects.
- Add to cart
