“NTC Thermistor Temperature Sensor Module 3 Pin” has been added to your cart. View cart
-
- Out of Stock
- Temperature Sensors
18B20 Digital Temperature Sensor
- 38.50 EGP
- 18B20 Digital Temperature Sensor
- Read more
-
-
- Environment Sensors
4 Pin Photo-resistor LDR Light Detection Resistance Sensor Module
- 30.00 EGP
- A versatile light-sensitive module that detects ambient light intensity using an LDR (Light Dependent Resistor), perfect for automatic lighting systems, weather stations, and smart home applications.
- Add to cart
-
- Sensors
5 Channel Analog Digital Flame Sensor Module
- 120.00 EGP
- 🚨 The 5 Channel Flame Sensor Module is a high-sensitivity, multi-directional fire detection solution capable of identifying flames or light sources in the 760 nm to 1100 nm wavelength range 🌈.Equipped with five independent flame detection units 📡, it ensures wide-area coverage and fast response ⚡ — making it perfect for safety-critical systems 🛡️ and robotics applications 🤖.
- Add to cart
-
- Out of Stock
- Infrared Sensors
5 Channel Line Tracking Sensor Module (BFD-1000)
- 143.00 EGP
- 5 Channel Line Tracking Sensor Module (BFD-1000)
- Read more
-
-
- Infrared Sensors
5V (3 Channel) Infrared Line Tracking Sensor Module
- 150.00 EGP
- Triple Position Reflectance Sensor Module
- Add to cart
-
- Touch Sensors
A38 Touch Switch Sensor Module
- 50.00 EGP
- The A38 Touch Switch Sensor Module is a compact, reliable, and easy-to-use capacitive touch switch. It’s designed for use in touch-sensitive applications where traditional mechanical buttons are either not practical or desired. The module detects the presence of a finger or conductive object on its touchpad and provides a digital output signal, making it ideal for embedded systems, home automation,…
- Add to cart
-
- Out of Stock
- Voltage Sensors
AC Voltage Sensor Module ZMPT101B
- 100.00 EGP
- ZMPT101B a voltage transform ideal to measure the AC voltage. It has high accuracy, good consistency for voltage and power measurement up to 250V AC. Easy to use and comes with a multi turn trim potentiometer for adjusting the ADC output.
- Read more
-
-
- Current Sensors, Sensors
AC/DC 5A Current Sensor Module ACS712-5A
- 100.00 EGP
- The ACS712-5A Current Sensor Module is a high-precision, Hall-effect-based sensor designed to measure both AC and DC currents up to ±5 Amps. Based on the ACS712ELC-05B chip from Allegro MicroSystems, this module provides an analog voltage output that is proportional to the current flowing through the onboard conductor. It is widely used in projects requiring current monitoring, such as power…
- Add to cart
-
- Sale!
- Sensors
Adafruit Absolute Orientation Sensor (BNO055) – 9-Axis IMU
- Original price was: 3,650.00 EGP.3,350.00 EGPCurrent price is: 3,350.00 EGP.
- Adafruit BNO055 9-DOF IMU with built-in Bosch fusion processor for accurate motion, orientation, and navigation sensing. Plug-and-play via I2C for Arduino, Raspberry Pi, and more. Outputs Euler angles, quaternions, acceleration, and gyroscope data at up to 100Hz.
- Add to cart
-
- Out of Stock
- Environment Sensors
Air Quality and Dust Sensor GP2Y10
- 400.00 EGP
- The Sharp GP2Y1010AU0F sensor is an optical sensor that allows to determine the quality of air, by detecting the level of particles in the air. Its operation is based on an infrared emitting diode and a photo-transistor are positioned inside the device to detect light reflected by dust or particles in the air.
- Read more
-
-
- Out of Stock
- Sensors
Arduino Uno Sensor Shield V4.0
- 66.00 EGP
- Arduino Uno Sensor This shield is compatible with most types of Arduino boards that support the standard header layout including Uno, Leonardo, and Mega. It provides a convenient way to connect various sensor modules, servo's, or I2C LCD displays without the need for soldering. Please note: I2C interface compatible with Uno only. When connecting multiple servos please check power requirements of…
- Read more
-
-
- Out of Stock
- Environment Sensors
Atomizer Air Humidifier 1.7MHZ piezo atomization transducer
- 44.00 EGP
- 20mm 1.7 MHz Ultrasonic Atomizer Air Humidifier Piezoelectric Transduce
- Read more
-
-
- Environment Sensors
BMP180 Barometric Pressure Sensor Module (GY-68) -5pin
- 115.00 EGP
- The GY-68 BMP180 is a high-precision, low-power digital barometric pressure sensor module designed to measure atmospheric pressure and temperature with exceptional accuracy. Based on the Bosch BMP180 sensor, this compact 5-pin module is widely used in weather stations, altitude tracking, indoor navigation, and IoT applications. It communicates via I2C interface, making it easy to integrate with microcontrollers like Arduino, ESP8266, ESP32, and Raspberry Pi.
- Add to cart
-
- Sensors
BMP180 GY-68 Barometric Pressure Sensor
- 125.00 EGP
- The BMP180 (GY-68) is a high-precision, low-power digital barometric pressure and temperature sensor, ideal for weather stations, altitude tracking, and IoT projects. With I2C interface and easy Arduino/Raspberry Pi compatibility, it’s perfect for measuring environmental data with high accuracy.
- Add to cart
-
- Environment Sensors
C43 Water Level Sensor & Liquid Water Droplet Depth Detection
- 20.00 EGP
- Water detection sensor is used to detect water leak, water level or rains. This is obtained by having a series of parallel wires exposed traces. The sensor traces have a weak pull-up resistor of 1 MΩ. The resistor will pull the sensor trace value high until a drop of water shorts the sensor trace to the grounded trace.
- Add to cart
-
- Out of StockSale!
- Environment Sensors
CJMCU-MICS-6814 (Air Quality Co, NH3, Nitrogen Oxide Gas Sensor)
- Original price was: 1,061.50 EGP.999.00 EGPCurrent price is: 999.00 EGP.
- The MiCS-6814 is a 3 sensor device suitable for gas leak detection and outdoor air quality monitoring. MiCS-6814 can detect many unhealthful gases, and three gases can be measured simultaneously due to its multi channels, so it can help you to monitor the concentration of gases where you expect the existence of more than one gas.
- Read more
-
-
- Sensors
Current Sensor Module ACS712 20A
- 110.00 EGP
- The ACS712 20A Current Sensor Module is a precise and compact solution for measuring both AC and DC currents up to ±20 Amperes. Based on the Allegro ACS712ELC-20A Hall-effect sensor IC, this module outputs a voltage proportional to the current passing through it, making it ideal for current monitoring and protection in various electronic and electrical systems. It is widely…
- Add to cart
-
- Current Sensors
Current Sensor Module ACS712 30A
- 110.00 EGP
- The ACS712 30A Current Sensor Module is a compact and accurate module for measuring both AC and DC currents up to ±30 Amperes. It is based on the Allegro ACS712ELC-30A Hall-effect sensor IC, which provides electrical isolation and a linear analog voltage output proportional to the current. This module is ideal for current sensing in microcontroller-based projects such as Arduino,…
- Add to cart
-
- Out of Stock
- Voltage Sensors
DC Voltage Detection Sensor Module 0-25V
- 30.00 EGP
- DC Voltage Detection Sensor Module 0-25V
- Read more
-
-
- Touch Sensors
DC3V-30V Touch Key Switch Sensing Module Bistable Light Touch Switch Jog/Latch For LED light band 4 wires
- 100.00 EGP
- The Capacitive Touch Sensor Switch Module is a versatile and compact touch-activated switch designed for a wide range of DIY electronics and automation projects. It supports DC input from 3V to 30V and can handle up to 2A current, making it suitable for controlling lights, small motors, and other low-power devices. This module replaces traditional mechanical switches with a modern…
- Add to cart
-
- Weather Sensors
DHT11 Digital Temperature And Humidity Sensor Module
- 50.00 EGP
- A reliable, low-cost environmental sensor that provides digital output for real-time temperature and humidity monitoring, perfect for weather stations, smart home systems, and IoT applications.
- Add to cart
-
- Weather Sensors
DHT22 digital temperature and humidity sensor AM2302 replaces SHT11 SHT15
- 93.50 EGP
- DHT22 Digital Temperature and Humidity Sensor AM2302. This is the most commonly used digital temperature and humidity sensor.
- Add to cart
-
- Weather Sensors
DHT22 Precision Digital Temperature and Humidity Sensor Module
- 210.00 EGP
- The DHT22 Precision Digital Temperature and Humidity Sensor Module is an excellent balance of accuracy, reliability, and ease of use. Whether you’re a hobbyist creating a DIY project, a student working on academic experiments, or an engineer developing IoT and industrial solutions, this sensor provides precise climate data you can depend on. With its digital interface, low power consumption, and…
- Add to cart
-
- Temperature Sensors
Digital Thermometer Sensor LCD Display-Waterproof Probe
- 75.00 EGP
- This Digital Thermometer features a high-precision waterproof probe and a clear LCD display, making it perfect for cooking, brewing, aquariums, labs, and industrial use. Get fast, reliable readings in Celsius (°C) or Fahrenheit (°F) with ±0.5°C accuracy!
- Add to cart
