-
16 Channel 12-bit PWM Servo Driver – PCA9685
It’s an I2C-controlled PWM driver with a built in clock. Adjustable frequency up to about 1.6 KHz. 12-bit resolution for each output for servos, that means about 4us resolution at 60Hz update rate.
132.00 EGP16 Channel 12-bit PWM Servo Driver – PCA9685
132.00 EGP -
3Amp 4V-16V DC Motor Driver MDD3A (2 Channels)
Looking for a motor driver for your mobile robot? Want to drive a stepper motor? Worry not! MDD3A is able to control two brushed DC motors or single bipolar/unipolar stepper motor from 4V to 16V.
With discrete MOSFETs H-Bridge design, this motor driver is able to support 3 Amp per channel continuously without any additional heatsink.
625.00 EGP -
3M660-N Microstep Driver
3M660 is a constant torque microstepping driver, voltage range from 24-58VDC, it’s suitable for various 3-phase NEMA23 & NEMA34 hybrid stepper motorWith the build-in constant current chopping circuit similar to servo driver, the motor run stable without vibration and noise in low speed.
990.00 EGP3M660-N Microstep Driver
990.00 EGP -
Cytron Dual Channel 10A DC Motor Driver Rev 2.0 – MDD10A (10A Each Channel)
This is a dual motor driver which is designed to drive 2 DC motor with high current up to 10A continuously and 30A peak. The driver works in the voltage range from 5 to 25 V. It also includes a fast test switch for driver testing.
This driver supports locked-antiphase and sign-magnitude PWM signal. It uses full solid-state components which result in faster response time and eliminate the wear and tear of the mechanical relay Cytron Dual Channel
1,350.00 EGP -
4.8-6V Servo Tester CCPM Consistency Master Checker with Rev
CCPM Servo Consistency Tester
55.00 EGP -
CNC Router Single Axis TB6600 Stepper Motor Driver 4A
This drive is an upgraded version of TB6600, heightening segments to 32 segments, for high-use segments. Applicable stepper motor: 42,57,86 type 2-phase 4-phase (4-wire line 6 line 8)
420.00 EGP -
CNC Router Single Axis 4.5A TB6600 Stepper Motor Driver
CNC Router Single Axis
600.00 EGP -
Cytron 20Amp 6V-30V DC Motor Driver MD20A
The MD20A enables bidirectional control of one high-power brushed DC motor from 6V to 30V. With discrete NMOS H-Bridge design, this motor driver is able to support 20Amp continuously without any heatsink.
690.00 EGPCytron 20Amp 6V-30V DC Motor Driver MD20A
690.00 EGP -
MA860H Stepper Motor Driver
MA860H Stepper Motor Driver is a high-performance stepper driver implemented with pure-sinusoidal current control technology. The MA860H Digital Stepper Motor Driver 50-110 VDC with 1.8-7.5A can be used to drive 2-phase or 4-phase motors (from “NEMA 17” or “NEMA 34” size) with less noise and heat. And it can provide better performances at high speed than most of the drivers in the markets.
It works with 36-110VDC/24-80VAC voltage and can provide max 7.2A peak current. You can set the DIP switches to get the current and micro steps you need.
1,599.00 EGP1,660.00 EGPMA860H Stepper Motor Driver
1,599.00 EGP1,660.00 EGP -
DM860 Stepper Motor Driver
DM860 Microstep driver 2 phase 7.2A DC18-80V
1,485.00 EGPDM860 Stepper Motor Driver
1,485.00 EGP -
TB6560 CNC 3-Axis Driver 3.5A
TB6560 stepper motor driver can drive up to 3 stepper motors with 3.5 A peak current for each motor. It is also equipped with spindle relay output and can handle a spindle. It has micro-stepping capability up to 1/16 micro-step.
The driver is integrated with break output board (so you do not need one) and can be connected directly to the parallel port. In addition, it has a manual control port interface for manual control of your motors.
The 3-axis driver uses Toshiba TB6560AHQ chip and equipped with optical isolation with dc-dc power supply isolation for full protection. Finally, this driver is compatible with most parallel software MACH3, KCAM4 etc.!
825.00 EGPTB6560 CNC 3-Axis Driver 3.5A
825.00 EGP
Shop By Department
- Arduino Shields
- Audio and Sound
- Batteries & Accessories
- Cables/Wires
- Classic Control Components
- Components
- Developments Boards
- Integrated Circuits
- Light Source and Display
- Mechanical Parts
- Measuring Devices
- Modules
- Motors
- Power Sources
- Programmers
- Robotics
- Sensors
- Switches
- Tools
- Terminals & Connectors
- Inverters
- Camera
- Mobile Accessories