-
16 Channel 12-bit PWM Servo Driver – PCA9685
It’s an I2C-controlled PWM driver with a built in clock. Adjustable frequency up to about 1.6 KHz. 12-bit resolution for each output for servos, that means about 4us resolution at 60Hz update rate.
132.00 EGP16 Channel 12-bit PWM Servo Driver – PCA9685
132.00 EGP -
3Amp 4V-16V DC Motor Driver MDD3A (2 Channels)
Looking for a motor driver for your mobile robot? Want to drive a stepper motor? Worry not! MDD3A is able to control two brushed DC motors or single bipolar/unipolar stepper motor from 4V to 16V.
With discrete MOSFETs H-Bridge design, this motor driver is able to support 3 Amp per channel continuously without any additional heatsink.
625.00 EGP -
3M660-N Microstep Driver
3M660 is a constant torque microstepping driver, voltage range from 24-58VDC, it’s suitable for various 3-phase NEMA23 & NEMA34 hybrid stepper motorWith the build-in constant current chopping circuit similar to servo driver, the motor run stable without vibration and noise in low speed.
990.00 EGP3M660-N Microstep Driver
990.00 EGP -
Cytron Dual Channel 10A DC Motor Driver Rev 2.0 – MDD10A (10A Each Channel)
This is a dual motor driver which is designed to drive 2 DC motor with high current up to 10A continuously and 30A peak. The driver works in the voltage range from 5 to 25 V. It also includes a fast test switch for driver testing.
This driver supports locked-antiphase and sign-magnitude PWM signal. It uses full solid-state components which result in faster response time and eliminate the wear and tear of the mechanical relay Cytron Dual Channel
1,350.00 EGP -
CNC Router Single Axis TB6600 Stepper Motor Driver 4A
This drive is an upgraded version of TB6600, heightening segments to 32 segments, for high-use segments. Applicable stepper motor: 42,57,86 type 2-phase 4-phase (4-wire line 6 line 8)
420.00 EGP -
4.8-6V Servo Tester CCPM Consistency Master Checker with Rev
CCPM Servo Consistency Tester
55.00 EGP -
CNC Router Single Axis 4.5A TB6600 Stepper Motor Driver
CNC Router Single Axis
600.00 EGP -
Cytron 20Amp 6V-30V DC Motor Driver MD20A
The MD20A enables bidirectional control of one high-power brushed DC motor from 6V to 30V. With discrete NMOS H-Bridge design, this motor driver is able to support 20Amp continuously without any heatsink.
690.00 EGPCytron 20Amp 6V-30V DC Motor Driver MD20A
690.00 EGP -
L9110 Dual Motor Driver (1A)
There are two L9110S motor control chip onboard
This module can simultaneously drive two DC motors or a 4-wire 2-phase stepper motor30.00 EGPL9110 Dual Motor Driver (1A)
30.00 EGP -
Stepper Motor ULN2003 Driver Module
The ULN2003 stepper motor driver PCB provides a direct drive interface between your microcontroller and stepper motor. The PCB provides 4 inputs for connection to your microcontroller, power supply connection for the stepper motor voltage, and ON/OFF jumper, a direct connect stepper motor header and 4 LEDs to indicate stepping state
35.00 EGPStepper Motor ULN2003 Driver Module
35.00 EGP -
65.00 EGP
75.00 EGPMini Motor Drive Shield Expansion Board L293D Module
65.00 EGP75.00 EGP
Shop By Department
- Arduino Shields
- Audio and Sound
- Batteries & Accessories
- Cables/Wires
- Classic Control Components
- Components
- Developments Boards
- Integrated Circuits
- Light Source and Display
- Mechanical Parts
- Measuring Devices
- Modules
- Motors
- Power Sources
- Programmers
- Robotics
- Sensors
- Switches
- Tools
- Terminals & Connectors
- Inverters
- Camera
- Mobile Accessories