Search Results for "board"
-
TCRT5000 Infrared Reflective Switch Line Tracking Sensor
TCRT5000 infrared sensor emits infrared emitting diode continuously when no infrared rays emitted or reflected back is reflected back but the strength is not large enough, the phototransistor has been in the off state, and the output terminal of the module is high, indicating that the diode has been in the off state; in the object to be detected within the detection range, and the intensity of the reflected infrared rays is large enough, phototransistor saturated, and the output terminal of the module is low, the indicator LED is lit.
35.00 EGP -
Arduino Uno R3 Italy
This is the new Arduino Uno R3.
In addition to all the features of the previous board, the Uno now uses an ATmega16U2 instead of the 8U2 found on the Uno (or the FTDI found on previous generations).
This allows for faster transfer rates and more memory. No drivers needed for Linux or Mac (inf file for Windows is needed and included in the Arduino IDE), and the ability to have the Uno show up as a keyboard, mouse, joystick, etc.
The Uno R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes. The Uno R3 works with all existing shields but can adapt to new shields which use these additional pins.
Note: The Arduino Uno R3 requires the Arduino 1.0 driver’s folder in order to install properly on some computers. We have tested and confirmed that the R3 can be programmed in older versions of the IDE. However, the first time using the R3 on a new computer, you will need to have Arduino 1.0 installed on that machine.
500.00 EGPArduino Uno R3 Italy
500.00 EGP -
Arduino Yun Orginal
Arduino Yun Orginal
1,850.00 EGP1,900.00 EGPArduino Yun Orginal
1,850.00 EGP1,900.00 EGP -
Infrared Flame Sensor Module
This module is sensitive to the flame and radiation. It also can detect ordinary light source in the range of of a wavelength 760nm-1100 nm. It can be used as a flame alarm or in fire fighting robots.
45.00 EGPInfrared Flame Sensor Module
45.00 EGP -
Ky-031 Knock Sensor Module
The knock sensor, detects the knocks and the taps. It can work like a switch. The sensor sends data momentarily to the board. To keep the LED on, the button state change codes should be used. So the sensor will work as a switch.
45.00 EGPKy-031 Knock Sensor Module
45.00 EGP -
Arduino Pro Mini
The Arduino Pro Mini is a microcontroller board based on the ATmega328.
It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, an on-board resonator, a reset button, and holes for mounting pin headers. A six pin header can be connected to an FTDI cable or Sparkfun breakout board to provide USB power and communication to the board.175.00 EGPArduino Pro Mini
175.00 EGP -
Robot Chassis (2 Gear Motors + 2 Wheels + Caster Wheel) Random color Chassis
Robot Platform (2 Gear Motors + 2 Wheels + Caster)
215.00 EGP -
Arduino Uno SMD China
The Arduino Uno SMD module is a compact and lightweight microcontroller board that packs a lot of features into a small package. Here are some of its key features:
- ATmega328P Microcontroller: The heart of the Arduino Uno SMD module is the ATmega328P microcontroller, which provides 32KB of flash memory and 2KB of SRAM. This powerful chip can handle a wide range of tasks, from controlling motors and sensors to running complex algorithms.
- USB Connectivity: The Arduino Uno SMD module features a built-in USB port, which makes it easy to connect to your computer and upload code. You can also use the USB port to power the board, so you don’t need a separate power source.
- Pin Headers: The Arduino Uno SMD module has a total of 14 digital input/output pins, 6 analog inputs, and a number of other pins for power and ground. These pin headers make it easy to connect sensors, actuators, and other components to the board.
- Wide Compatibility: The Arduino Uno SMD module is compatible with a wide range of software and hardware, including the Arduino IDE, which makes it easy to program even if you’re new to microcontrollers. It also supports a variety of communication protocols, such as I2C, SPI, and UART.
350.00 EGPArduino Uno SMD China
350.00 EGP -
Arduino Duemilanove
The Arduino Duemilanove is a microcontroller board based on the ATmega168 or ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller, simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
110.00 EGPArduino Duemilanove
110.00 EGP -
Arduino Esplora
The Arduino Esplora is a feature-packed development board that offers a range of benefits, including:
- Versatility: The Esplora is designed for a wide range of applications, from electronics and robotics to art and design.
- User-Friendly Design: The compact design and easy-to-use features of the Esplora make it an ideal choice for beginners and advanced users alike.
- Sensors: The Esplora features a variety of sensors that allow you to detect and respond to changes in light, sound, touch, rotation, acceleration, magnetic fields, temperature, and humidity.
- LCD Screen: The 2.5-inch LCD screen allows you to display data and interact with your project in real-time.
- Control Buttons: The control buttons on the Esplora allow you to interact with your project and control its behavior.
- USB Port: The USB port on the Esplora allows you to connect it to your computer and program it using the Arduino IDE.
- Speaker: The built-in speaker on the Esplora allows you to add sound to your project.
- SD Card Slot: The SD card slot on the Esplora allows you to store data and access it quickly and easily.
1,200.00 EGPArduino Esplora
1,200.00 EGP -
Arduino Leonardo China
The Arduino Leonardo is a microcontroller board based on the ATmega32u4.
It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro-USB connection, a power jack, an ICSP header, and a reset button.
It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.
231.00 EGPArduino Leonardo China
231.00 EGP -
Arduino Leonardo Italy
The Arduino Leonardo is a microcontroller board based on the ATmega32u4.
It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro-USB connection, a power jack, an ICSP header, and a reset button.
It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.
385.00 EGPArduino Leonardo Italy
385.00 EGP