Search Results for "arduino"
-
Relay Module 8 Channel 5V
This is a 5V 8-Channels Relay module, It can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM and MSP430.
8 relays are included in this module, with “NC” ports means “Normally connected to COM” and “NO” ports means “Normally open to COM”. This module also equipped with 8 LEDS to show the status of relays
195.00 EGPRelay Module 8 Channel 5V
195.00 EGP -
Relay Module 1 Channel 5V
The Single Channel Relay Module is a convenient board that can be used to control high voltage, high current loads such as motor, solenoid valves, lamps, and AC load.
It is designed to interface with microcontrollers such as Arduino, PIC and etc.
The relays terminal (COM, NO, and NC) is being brought out with a screw terminal. It also comes with a LED to indicate the status of the relay.
50.00 EGPRelay Module 1 Channel 5V
50.00 EGP -
LCD Touch Module 3.5 Inch Tft
- 3.5 inch 480×320 TFT LCD Touch Screen Module ILI9486 LCD Display for Arduino UNO MEGA2560 Board
280.00 EGPLCD Touch Module 3.5 Inch Tft
280.00 EGP -
GY-45 MMA845 3-Axis Accelerometer Module
The MMA8452 is a smart low-power, three-axis accelerometer with 12 bits of resolution.
This accelerometer is packed with embedded functions with flexible user programmable options, configurable to two interrupt pins.
The MMA8452 has user selectable full scales of ±2g/±4g/±8g. The device can be configured to generate inertial wake-up interrupt signals allowing the MMA8452 to monitor events and remain in a low power mode during periods of inactivity.
This board breaks out the ground, power, I2C and two external interrupt pins.
100.00 EGPGY-45 MMA845 3-Axis Accelerometer Module
100.00 EGP -
GY-521 MPU6050 Triple 3-Axis Accelerometer Gyroscope I2C
The MPU6050 contains both a 3-Axis Gyroscope and a 3-Axis accelerometer allowing measurements of both independently, but all based around the same axes, thus eliminating the problems of cross-axis errors when using separate devices.
150.00 EGP -
ENC28J60 Ethernet Network Module Mini Board
ENC28J60 Ethernet LAN Network Module for Arduino 51 AVR LPC
121.00 EGPENC28J60 Ethernet Network Module Mini Board
121.00 EGP -
ENC28J60 Ethernet Network Module
ENC28J60 Ethernet Network Module
121.00 EGPENC28J60 Ethernet Network Module
121.00 EGP -
RFID 13.56 Mhz Card Reader “MFRC522 RFID Reader/Writer”
RFID 13.56 Mhz Card Reader “MFRC522 RFID Reader/Writer”
This is a 13.56MHz RFID read and write module. It can be used for almost all kinds of 13.56MHz passive ID cards and tags. It is ISO14443A compatible The module is easy to use and It can be used with Arduino and microcontroller through SPI moe.
150.00 EGP -
MQ-3 Alcohol, Ethanol Sensor Module
MQ-3 Gas Sensor with high sensitivity to Alcohol, Gasoline can resist, Smoke, Water vapor interference.
75.00 EGPMQ-3 Alcohol, Ethanol Sensor Module
75.00 EGP -
18B20 Digital Temperature Sensor
18B20 Digital Temperature Sensor
38.50 EGP18B20 Digital Temperature Sensor
38.50 EGP -
Heart Pulse Rate Sensor With Accessories
Heart Pulse Rate Sensor With Accessories
125.00 EGPHeart Pulse Rate Sensor With Accessories
125.00 EGP -
ATMega328PU – With Bootloader made in Taiwan (Original)
ATMega328PU – With Bootloader made in Taiwan (Original)
The ATMega328PU is a microcontroller unit manufactured by Microchip Technology, widely known for its versatile use in various embedded systems and DIY electronics projects. Here are the specifications and a description for the ATMega328PU, particularly the version with a bootloader made in Taiwan, presumed to be an original product:
Specifications:
- Microcontroller: ATMega328PU
- Manufacturer: Microchip Technology
- Operating Voltage: 1.8V to 5.5V
- CPU Speed: 20 MHz maximum
- Flash Memory: 32 KB (of which 0.5 KB is used by the bootloader)
- SRAM: 2 KB
- EEPROM: 1 KB
- Digital I/O Pins: 23
- Analog Input Pins: 6
- Communication Interfaces: UART, SPI, I2C/TWI
300.00 EGP