-
JGA25-370 DC Gearmotor (35 RPM At 6V)
This easy-to-mount JGA25-370 DC gearmotor is great for building robots and it comes in a variety of configurations that suit even the most exigent designs.
This motor features a D-shaped output shaft.
110.00 EGPJGA25-370 DC Gearmotor (35 RPM At 6V)
110.00 EGP -
JGA25-370 DC Gearmotor (250 RPM At 12V)
JGA25-370 DC gearmotor is easy to mount, great for building robots and it comes in a variety of configurations that suit even the most exigent designs.
This motor features a D-shaped output shaft.
110.00 EGPJGA25-370 DC Gearmotor (250 RPM At 12V)
110.00 EGP -
DC Gear Motor (176RPM At 12V 8.8Kg.cm)
DC Gear Motor (176RPM At 12V 8.8Kg.cm)
193.00 EGPDC Gear Motor (176RPM At 12V 8.8Kg.cm)
193.00 EGP -
IBT-2 Motor Driver 43A
IBT-2 43A H-Bridge Motor Driver Module the drive uses an H-bridge driver module that composed by Infineon power drive chip BTS7960, with overheating and overcurrent protection.
motor driver H-bridge driver circuit, with strong drive and braking effect, use 74HC244 chip effectively isolate the microcontroller and the motor drive High Current up to 43A
IBT-2 motor driver is a fully integrated high current H bridge module for motor drive applications.
Interfacing to a microcontroller is made easy by the integrated driver IC which features logic level inputs, diagnosis with current sense, slew rate adjustment, dead time generation and protection against overtemperature, overvoltage, under voltage, overcurrent and short circuit.
provides a cost optimized solution for protected high current PWM motor drives with very low board space consumption.
The 43a motor driver IBT-2 H-bridge module is an inexpensive, high power motor driver based on two BTS7960 chips
This driver 43a motor driver uses two high current half bridge Infineon BTS 7960 chip for motor drive applications. Interfacing to a microcontroller is made easy using this driver which features current sensing, slew rate adjustment and protection against over temperature, overvoltage, under voltage, over current and short circuit.
This small size driver provides a cost optimized solution for protected high current PWM motor drives.
275.00 EGPIBT-2 Motor Driver 43A
275.00 EGP -
A3967 Easy Driver Microstepping Driver
The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver).
95.00 EGPA3967 Easy Driver Microstepping Driver
95.00 EGP -
30A Dual Motor Driver High-Power H Bridge
30A Dual Motor Driver High-Power H Bridge
440.00 EGP30A Dual Motor Driver High-Power H Bridge
440.00 EGP -
28BYJ-48 Stepper Motor 5VDC
Mainly used in Air Conditioner Louver , Small Cooling/Heating Fan etc.
75.00 EGP28BYJ-48 Stepper Motor 5VDC
75.00 EGP -
-
10A Single Channel DC Motor Drive Board 350W
10A Single Channel DC Motor Drive Board Module Industrial Large Power MOSFET Single H Bridge w/ Braking
242.00 EGP10A Single Channel DC Motor Drive Board 350W
242.00 EGP -
10A Double Way Motor Driver
10A Double Way Motor Driver
385.00 EGP10A Double Way Motor Driver
385.00 EGP -
DRV8825 Stepper Motor Driver (md20b)
The DRV8825 stepper motor driver carrier is a breakout board for DRV8825 microstepping bipolar stepper motor driver. The module has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver board, so it can be used as a higher-performance drop-in replacement for those boards in many applications. The DRV8825 features adjustable current limiting, overcurrent and overtemperature protection, and six microstep resolutions (down to 1/32-step). It operates from 8.2 – 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (rated for up to 2.2 A per coil with sufficient additional cooling).
120.00 EGPDRV8825 Stepper Motor Driver (md20b)
120.00 EGP -
A4988 Stepper Motor Driver 2A
A4988 Stepper Motor Driver 2A
85.00 EGPA4988 Stepper Motor Driver 2A
85.00 EGP
Shop By Department
- Arduino Shields
- Audio and Sound
- Batteries & Accessories
- Cables/Wires
- Classic Control Components
- Components
- Developments Boards
- Integrated Circuits
- Light Source and Display
- Mechanical Parts
- Measuring Devices
- Modules
- Motors
- Power Sources
- Programmers
- Robotics
- Sensors
- Switches
- Tools
- Terminals & Connectors
- Inverters
- Camera
- Mobile Accessories