-
Wemos NodeMCU V3 ESP8266 340G WIFI Module With Extra Memory 32M Flash
Wemos NodeMCU V3 ESP8266 340G WIFI Module With Extra Memory 32M Flash module is based on widely explored esp8266 System on Chip from Expressif.
120.00 EGP -
5V 2A Wireless Charger Module
5V 2A Large Current Wireless Charger Module Wireless Power Supply Module Transmitter Receiver Charging Coil Module
320.00 EGP5V 2A Wireless Charger Module
320.00 EGP -
ESP8266 WiFi 4 channel Relay Module
DC 12V ESP8266 4 channel relay board ESP-01 WIFI module 4 channel WIFI relay module for smart home smart furniture
450.00 EGPESP8266 WiFi 4 channel Relay Module
450.00 EGP -
ESP8266 ESP-12F Wifi Transceiver Wireless Module
The Latest ESP-12F ESP8266 Wi-Fi Module AP & Station Remote Serial Wireless IoT Board is an integrated chip designed for the needs of a new connected world.
It can handle all the necessary overhead for communicating with your network, such as TCP/IP stack and communicating with your 802.11 networks.
It is completely addressable over SPI and UART protocols allowing you to connect your sensors or project directly to it through its GPIO’s. ESP8266 is a low-cost Wi-Fi chip with a full TCP/IP stack and MCU (Micro Controller Unit) capability.
ESP8266 Serial Wi-Fi Wireless Transceiver Module is a self-contained SOC with an integrated TCP/IP protocol stack that can give any microcontroller access to your Wi-Fi network.
ESP8266 Serial Wifi Wireless Transceiver Module is capable of either hosting an application or offloading all Wi-Fi networking functions from another application processor.
Each ESP8266 module comes pre-programmed with an AT command set firmware, meaning, you can simply hook this up to your Arduino device and get about as much Wi-Fi-ability as a Wi-Fi Shield offers.
The ESP8266 module is an extremely cost-effective board with a huge, and ever-growing, community.
ESP8266 Serial Wi-Fi Wireless Transceiver Module has a powerful enough onboard processing and storage capability that allows it to be integrated with the sensors and other application-specific devices through its GPIOs with minimal development up-front and minimal loading during runtime.
Its high degree of on-chip integration allows for minimal external circuitry, including the front-end module, which is designed to occupy a minimal PCB area.
The ESP8266 supports APSD for VoIP applications and Bluetooth co-existence interfaces, it contains a self-calibrated RF allowing it to work under all operating conditions and requires no external RF parts.
185.00 EGP -
WiFi ESP8266 Serial TTL Module ESP-01S
WiFi ESP8266 Serial TTL Module ESP-01S
140.00 EGPWiFi ESP8266 Serial TTL Module ESP-01S
140.00 EGP -
ESP32 Development Board (WIFI and Bluetooth) with Ch340 USB Type-C
The ESP32 Dev Board CH340 – USB-C is an exceptional development board meticulously designed to cater to a wide array of IoT (Internet of Things) applications. Powered by the robust ESP32 microcontroller, it offers a versatile range of connectivity options, making it suitable for a multitude of IoT projects. This board boasts a USB-C interface coupled with a reliable CH340 USB-to-Serial converter, ensuring seamless and dependable connectivity for programming and debugging purposes.
Key Features:
- Microcontroller:
- The ESP32 Dev Board is built around the powerful ESP32 dual-core 32-bit microcontroller.
- It operates at clock frequencies of up to 240 MHz, ensuring smooth and efficient performance.
- Connectivity:
- Equipped with Wi-Fi 802.11 b/g/n (2.4 GHz) for wireless communication, it facilitates seamless data transfer.
- Bluetooth 4.2/BLE (Bluetooth Low Energy) is integrated, enabling easy and energy-efficient IoT device connections.
- USB-C Interface:
- The USB-C port serves dual purposes – power supply and data communication.
- Featuring the CH340 USB-to-Serial converter, it guarantees a stable connection to your computer.
- GPIO Pins:
- With 38 GPIO pins at your disposal, you have the flexibility for hardware interfacing.
- These pins support a wide range of functionalities, including PWM, I2C, SPI, UART, and more.
- Memory:
- The board offers 520KB of SRAM for data storage.
- It comes with 16MB of Flash memory for program storage, providing ample space for your applications.
- Power Supply:
- The ESP32 Dev Board operates at an optimal voltage of 3.3V.
- The USB-C interface can be used for both power supply and data transfer, simplifying the setup.
- Integrated Peripherals:
- A built-in temperature sensor adds environmental sensing capabilities to your projects.
- A Hall effect sensor is included for magnetic field detection.
- An ultra-low-power co-processor is at your disposal for handling energy-efficient operations.
- Development Environment:
- The board is compatible with the Arduino IDE, making development and programming accessible even to beginners.
- It also supports MicroPython and other popular development platforms, catering to a wide range of preferences.
- Form Factor:
- Designed with a compact form factor and standard mounting holes, it easily integrates into various projects.
- The board’s dimensions are [Specify dimensions] for precise fitment.
- LED Indicators:
- On-board LEDs are available for power and status indication, simplifying troubleshooting and debugging.
- Operating Temperature:
- The ESP32 Dev Board is built to withstand a variety of environmental conditions, making it suitable for both indoor and outdoor applications.
- Certification:
- This board complies with CE, FCC, and RoHS regulations, ensuring safety and environmental compatibility.
- Software Development:
- Benefit from extensive open-source community support with a wealth of libraries and resources, facilitating rapid development and prototyping.
Applications:
- IoT Prototyping and Development: This board is ideal for experimenting with IoT concepts and creating functional prototypes.
- Home Automation Projects: Automate and control various devices and systems within your home.
- Sensor Monitoring and Data Logging: Utilize the board for collecting and analyzing data from various sensors.
- Wearable Devices: Create wearable technology with wireless connectivity and sensors.
- Industrial Automation and Control Systems: Implement IoT solutions for monitoring and managing industrial processes.
- Robotics and Remote Control Applications: Build remote-controlled robots and gadgets for education and hobbyist projects.
Package Contents:
- ESP32 Dev Board CH340 – USB-C.
- USB-C cable for power and data connection.
430.00 EGP - Microcontroller:
-
85.6kbps SIM800L GSM GPRS Module
The SIM800L module supports quad-band GSM/GPRS network, available for GPRS and SMS message data remote transmission. The SIM800L communicates with microcontroller via UART port, supports command including 3GPP TS 27.007, 27.005 and SIMCOM enhanced AT Commands. It also has built-in level translation, so it can work with microcontroller of higher voltage than 2.8V default. Besides, the board also supports A-GPS technique which is called mobile positioning and gets position by mobile network. This features make it can also be a tracker module.
330.00 EGP85.6kbps SIM800L GSM GPRS Module
330.00 EGP -
SIM800L V2.0 5V Wireless Quad Band GSM GPRS Module PCB Antenna
Wireless Quad Band GSM GPRS Module
This module power supply for 5 v, computer debug USB to TTL serial port. Power supply can output current of 800 mA, TTL serial interface is compatible with 3.3 V and 5 V single chip microcomputer.
400.00 EGP -
-
ESP8266 ESP-01 with USB adapter WiFi module
This module is a USB programmer for ESP8266 modules of type ESP-01.
175.00 EGPESP8266 ESP-01 with USB adapter WiFi module
175.00 EGP -
RFID 13.56 Mhz Card Reader “MFRC522 RFID Reader/Writer”
RFID 13.56 Mhz Card Reader “MFRC522 RFID Reader/Writer”
This is a 13.56MHz RFID read and write module. It can be used for almost all kinds of 13.56MHz passive ID cards and tags. It is ISO14443A compatible The module is easy to use and It can be used with Arduino and microcontroller through SPI moe.
150.00 EGP
Shop By Department
- Arduino Shields
- Audio and Sound
- Batteries & Accessories
- Cables/Wires
- Classic Control Components
- Components
- Developments Boards
- Integrated Circuits
- Light Source and Display
- Mechanical Parts
- Measuring Devices
- Modules
- Motors
- Power Sources
- Programmers
- Robotics
- Sensors
- Switches
- Tools
- Terminals & Connectors
- Inverters
- Camera
- Mobile Accessories