-
- Other Modules
TEC1-12709 Thermoelectric Cooler (Peltier)
- 365.00 EGP
- The TEC1-12709 is a high-performance thermoelectric cooler based on the Peltier effect, capable of efficiently transferring heat from one side to the other when powered. It’s widely used in applications requiring compact, reliable, and silent cooling or heating solutions.
- Add to cart
-
- Components, Other Modules, Relays
Relay Module 2 Channel 12V (high/low) level trigger
- 75.00 EGP
- This 2-Channel 12V Relay Module allows you to control high-voltage/high-current devices (up to 250V AC / 30V DC @ 10A per channel) using a 12V control signal, making it ideal for automotive, industrial, and home automation applications. Each relay features optocoupler isolation for protection against voltage spikes and supports both HIGH and LOW-level triggering (configurable via jumper).
- Add to cart
-
- Batteries & Accessories, Chargers, Modules, Other Modules
Lithium Battery Charger Protection Module (BMS) 3S 40A 12.6V
- 85.00 EGP
- A compact and versatile storage solution designed for organizing small electronic components, screws, beads, and craft supplies. This 10-compartment plastic box features transparent lids for easy identification and secure snap-lock closures to prevent spills.
- Add to cart
-
- Out of Stock
- Modules, Other Modules
BMP280 Barometric Pressure and Altitude Sensor I2C/SPI Module
- 60.00 EGP
- DESCRIPTION Now we’ve got a high-precision environmental sensor at even lower cost, Barometer Sensor(BMP280). It is based on their new BMP280 sensor, which is an upgraded version of the old BMP180 Barometer Sensor (BMP180). The module provides precise measurement of barometric pressure and temperature in the environment. The air pressure can be measured in a range from 300 hPa to…
- Read more
-
-
- Modules, Other Modules, Wireless
ESP-01/ESP-01S Relay WiFi Smart Control Module for Arduino
- 65.00 EGP
- The ESP-01/ESP-01S Relay Module is a WiFi-based smart switch that allows you to control electrical devices remotely via your smartphone, tablet, or microcontroller (like Arduino). Designed to work seamlessly with the ESP8266 ESP-01/ESP-01S WiFi module, it enables wireless ON/OFF control of appliances over a network, making it ideal for IoT (Internet of Things) applications. This module is perfect for home…
- Add to cart
-
- Modules, Other Modules
LASER Receiver Module
- 65.00 EGP
- This Laser Receiver Module is a high-sensitivity photoelectric sensor designed to detect laser beams (650nm red or 850nm IR) for precision alignment, security systems, and industrial automation. With a digital/analog output, it’s perfect for Arduino, PLCs, and DIY projects requiring beam-break detection.
- Add to cart
-
- Batteries & Accessories, Modules, Other Modules
LCD Dual USB 5V 1A 2.1A Mobile Power Bank Module
- 150.00 EGP
- The LCD Dual USB Power Bank Module is a smart charging control board designed for DIY power banks, portable chargers, and backup battery projects. Featuring dual USB outputs (5V/1A + 5V/2.1A), an LCD battery level display, and overcharge/discharge protection, this module efficiently converts 3.7V Li-ion/Polymer batteries into a reliable power source for smartphones, tablets, and USB devices. With real-time voltage/current monitoring and compact design, it’s perfect for hobbyists and professionals building custom power solutions.
- Add to cart
-
- Batteries & Accessories, Chargers, Lithium Batteries, Modules, Other Modules
Lithium Battery Charger Protection Module (BMS) 5S 15A 21V
- 135.00 EGP
- The 5S 15A Battery Management System (BMS) is a high-performance protection and charging module designed for 5-cell lithium-ion (Li-ion/LiPo) battery packs (18.5V/21V). With 15A continuous discharge current, overcharge/over-discharge protection, and cell balancing, this BMS ensures safe, efficient, and long-lasting battery operation for electric scooters, solar storage, power tools, and high-voltage DIY projects.
- Add to cart
-
- Modules, Other Modules, Switches
Tilt Switch Module KY020
- 35.00 EGP
- The KY-020 Tilt Switch Module is a simple ball-in-cage tilt sensor that detects orientation changes. When tilted beyond a threshold angle, it triggers a digital signal (HIGH/LOW), making it ideal for position detection, anti-theft alarms, and motion-activated projects. This module includes a comparator circuit (LM393) for clean signal output and works with 3.3V or 5V microcontrollers like Arduino, ESP8266, and Raspberry Pi.
- Add to cart
-
- Modules, Other Modules
4 Channel 5V Relay Module Board Shield for Arduino
- 275.00 EGP
- 4 Channel 5V Relay Module Board Shield for Arduino This 5V 4 Relay Shield Module is a small current signal control power equipment commonly used electronic module Enabling high-power single-chip control devices are widely used in SCM system to make smart home project Can be directly plugged into the compatible the use of various types of motherboards, eliminating the patch…
- Add to cart
-
- Medical Sensors, Modules, Other Modules, Sensors
KY039 Finger Detection Heartbeat Measuring Sensor Module
- 30.00 EGP
- The KY-039 Heartbeat Sensor Module is a photoplethysmography (PPG)-based sensor designed to detect heartbeat/pulse signals by measuring blood flow changes in fingertips or earlobes. This low-cost module uses an infrared (IR) LED and phototransistor to capture pulse waveforms, making it ideal for health monitoring, fitness tracking, and biomedical projects. With simple analog output compatibility, the KY-039 can interface with Arduino, Raspberry Pi, and other microcontrollers to visualize real-time pulse data or trigger alerts.
- Add to cart
-
- Ethernet, Modules, Other Modules, Wireless
Ai-Thinker A9G GSM/GPRS+GPS/BDS Development Board
- 1,700.00 EGP
- ORIGINAL AI-THINKER A9G GSM/GPRS GPS/BDS DEVELOPMENT BOARD SMS VOICE WIRELESS DATA TRANSMISSION POSITIONING
- Add to cart
-
- Modules, Other Modules
Mini 5V Traffic Light LED Display Module for Arduino Red Yellow Green 5mm LED
- 30.00 EGP
- Mini 5V Traffic Light LED Display Module with Red, Yellow, and Green 5mm LEDs. Perfect for Arduino, Raspberry Pi, and DIY projects to simulate real traffic signals. Ideal for education, robotics, and STEM learning.
- Add to cart
-
- Out of Stock
- Other Modules
3D Printer Mechanical End Stop Switch Module
- 35.00 EGP
- 3D Printer Mechanical End Stop Switch Module is a Mechanical End stop kit or 3D Printers or CNC machines.
- Read more
-
-
- Out of Stock
- Other Modules
Kingston Canvas Select Plus 32GB Micro SD Card
- 121.00 EGP
- Read more
-
-
- Out of Stock
- Other Modules
Micro-USB Female Breakout Module
- 15.00 EGP
- A Female MicroUSB port with breakout board so you can solder on wires or header pins and integrate into any project.
- Read more
-
-
- Other Modules
LED Matrix 8×8 MAX7219 Module for Arduino and Microcontroller
- 150.00 EGP
- Buy the LED Matrix 8x8 MAX7219 Module for Arduino and Microcontroller. Easy-to-use LED display with SPI interface, adjustable brightness, and cascading support. Perfect for scrolling text, DIY electronics, and robotics projects.
- Add to cart
-
- Out of Stock
- Other Modules
MAX6675 Module for Thermocouple K Type
- 225.00 EGP
- This K Type Thermocouple can be used to measure temperatures up to 600 degree Celsius! Great for industrial projects, 3D Printers, DIY and hobby projects which require a high temperature to be measured.
- Read more
-
-
- Other Modules
GY-273 3-Axis Compass Magnetometer Sensor Module
- 250.00 EGP
- GY-273 DC 3V-5V HMC5883L Triple Axis Compass Magnetometer Sensor Module Three Axis Magnetic Field Module for Arduino
- Add to cart
-
- Out of Stock
- Other Modules
SILICON POWER USB Flash Ultima U03, 32GB, USB 2.0
- 110.00 EGP
- Elegant and stylish USB drive with luxurious diamond cut pattern and 32GB storage capacity
- Read more
-
-
- Out of Stock
- Other Modules
16 Channel Analog Multiplexer
- 38.50 EGP
- Multiplexer Module is a micro chip that requires 1 Analog Pin and 2 to 4 Digital Pins to allow the micro controller to monitor more Analog Pins for sensor readings. The requirement of 1 Analog Pin is actually the output pin shared among all the extension Analog Pins. The module only allow 1 Analog channel or sensor value to be connected to…
- Read more
-
-
- Out of Stock
- Other Modules
CH376S U Disk Read Write Module For USB Control Transfer
- 110.00 EGP
- CH376 is common a USB bus interface chip, with 8 bit data bus and reading, writing and chip select lines and interrupt output, can easily attached to the system bus of the single chip microcomputer /DSP/MCU/MPU controller.
- Read more
-
-
- Out of Stock
- Other Modules
Lipo Battery Voltage Tester / Low Voltage Buzzer Alarm
- 55.00 EGP
- LIPO Battery Voltage Tester and low voltage buzzer alarm combo is easy to use. Li-Po Battery Voltage Buzzer Indicator: directly plug it into your operating battery, it will monitor the conditions of your battery all the time, so your batteries shall remain within safe operating voltage range at all times.
- Read more
-
