-
Mini DC-DC Boost Step Up Converter 3.7V to 5V / 8V/ 9V / 12V
Mini DC-DC Boost Step Up Converter with an output voltage greater than the source voltage.
The output current is lower than the source current.
This is a high voltage step-up power supply module, which is commonly used in electronics experiments and demonstrations.
The high-voltage module uses the principle of the Tesla coil.
The voltage boost converter module provides 3.7V DC stable voltage output at various input ranges between 3.7V to 12V.
This small, tiny circuit boosts the voltage level and provides the amplified stabilized 5V/ 8V/ 9V 12V output.
For the different input ranges, it consumes a different amount of current to produce a balanced output.
75.00 EGP -
LM2577 2.5A DC-DC Step UP LED Voltmeter 3-34 to 4-35V Adjustable Boost Converter module
The LM2577 2.5A DC-DC Step UP LED Voltmeter 3-34 to 4-35V Adjustable Boost Converter module is a 150 KHz fixed frequency PWM buck (step-down) DC/DC module. Requiring a minimum number of external components, these regulators are cost-effective, and simple to use.
77.00 EGP -
LM2577 DC – DC Converter Step-Up 2.5A
LM2577 DC – DC Converter Step-Up 2.5A
80.00 EGPLM2577 DC – DC Converter Step-Up 2.5A
80.00 EGP -
LM2596S DC-DC Step-Down Adjustable Converter 3A
LM2596S DC-DC 4.5-40V adjustable Step-Down Power Supply Module
80.00 EGP -
DC-DC Boost Converter Voltage Step Up Module 150W 6A
It is a very suitable Voltage Booster/Regulator for projects that require high power. The board can boost 10V-32V input voltage to regulated 12V-35V adjustable output voltage. The input current of the board is up to 6A and output current is up to 10A. The board has 100W output power without cooler. With proper cooling the output power can be as high as 150W.
83.00 EGP -
CP2102 Chip USB to TTL (Serial) Converter
CP2102 is silab developed USB to serial chip, small size, may not require any peripheral components to reach into a simple USB-UART scheme, communication speed up to 1Mbps.
85.00 EGP -
Hi Link AC-DC Module 220Vac to 12Vdc “HLK-PM12”
HLK-PM12 is a ultra-compact power module. It is designed to meet the requirements of EMC and Safety Test. It can use in IOT project, Smart home and so on.88.00 EGP -
Hi Link AC-DC Module 220Vac to 5Vdc “HLK-PM01”
HLK-PM01 is a ultra-compact power module. It is designed to meet the requirements of EMC and Safety Test. It can use in IOT project, Smart home and so on.88.00 EGP -
Hi Link AC-DC Module 220Vac to 3.3Vdc “HLK-PM03”
Hi Link AC-DC Module 220Vac to 3.3Vdc “HLK-PM03”
-
AC-DC 220V To 3.3Visolating Switch Power Supply Module/ Step-Down Module
-
Output Overload And Short Circuit Protection
-
Low Power Consumption, Environmental Protection, No-Load Loss <0.1W
-
The Product Is Designed to Meet the Requirements of EMC And Safety Test
-
It can use in IOT project, Smart home and so on.
88.00 EGP -
-
XL4015 5A DC Buck Step Down Voltage Converter
This module combines the high efficiency XMLSEMI XL4015 DC-DC buck converter IC with a TI LM358 Op-Amp for stable current regulation. This module offers much higher efficiency than LM2596 based modules which means less heat and more available power for your device.
90.00 EGP
Shop By Department
- Arduino Shields
- Audio and Sound
- Batteries & Accessories
- Cables/Wires
- Classic Control Components
- Components
- Developments Boards
- Integrated Circuits
- Light Source and Display
- Mechanical Parts
- Measuring Devices
- Modules
- Motors
- Power Sources
- Programmers
- Robotics
- Sensors
- Switches
- Tools
- Terminals & Connectors
- Inverters
- Camera
- Mobile Accessories