-
- Sale!
- ESP
FireBeetle 2 ESP32-S3 Development Board (Wi-Fi/Bluetooth, Camera, External Antenna Support)
- Original price was: 2,400.00 EGP.2,250.00 EGPCurrent price is: 2,250.00 EGP.
- FireBeetle 2 ESP32-S3 is a powerful IoT development board from DFRobot, featuring an ESP32-S3 Wi-Fi/Bluetooth dual-mode chip, an integrated camera, and support for an external antenna. Designed for AIoT, smart devices, and wireless imaging applications, this board delivers enhanced processing power, connectivity, and versatility for advanced projects.
- Add to cart
-
- Out of StockSale!
- Raspberry Pi Accessories
flexible flat cable (FFC) adapter converts the 22-pin 0.5mm pitch camera port on the Raspberry Pi 5 to a standard 15-pin 1.0mm pitch interface, enabling compatibility with Raspberry Pi Camera Modules (v1/v2/HD) and third-party MIPI CSI cameras.
- Original price was: 500.00 EGP.250.00 EGPCurrent price is: 250.00 EGP.
- flexible flat cable (FFC) adapter converts the 22-pin 0.5mm pitch camera port on the Raspberry Pi 5 to a standard 15-pin 1.0mm pitch interface, enabling compatibility with Raspberry Pi Camera Modules (v1/v2/HD) and third-party MIPI CSI cameras.
- Read more
-
-
- Out of Stock
- Controllers
Fluid Level Controller
- 319.00 EGP
- The device connected to an electrical pump through an electrical cable ,is used for the auto-control and no-water protection of the water tower and water pool
- Read more
-
-
- Out of Stock
- Programmers
FPGA Altera Cyslonell EP2C5T144 board + FPGA programmer
- 1,017.50 EGP
- This FPGA Development board uses ALTERA CysloneII EP2C5T144 chip. The FPGA Board can easily be embedded into user’s application. It can be used for a variety of tasks, ranging from simple logic control, data acquisition, signal processing, mathematical calculations and more. All the I/Os are routed to standard header pins which can be used to connect peripherals, memories and other…
- Read more
-
-
- Out of Stock
- ARM Boards
Friendly Arm Tiny 6410
- 3,300.00 EGP
- Smart210 is a highly integrated, high-performance Cortex-A8 core board designed, manufactured and distributed by the friendly arm of Guangzhou. Both use Samsung S5PV210 as the main processor, which can run at up to 1GHz. The S5PV210 integrates PowerVR SGX540 high-performance graphics engine, supports smooth 3D graphics operation, and can play 1080P large-size HD videos. The Smart210 core board uses 2.0mm pitch double-row…
- Read more
-
-
- ARM Boards
Friendly ARM Tiny210 CPU Board
- 6,500.00 EGP
- Friendly ARM Tiny210 CPU Board SDK Board (V. 1309 and 1312) 4.3" Resistive LCD 1MHz Tiny210 ARM Cortex A8 Linux System. The Tiny210 CPU board is designed and developed by FriendlyElec. It uses the Cortex embedded processing board and Samsung S5PV210 system chip (SOC). The maximum frequency is 1 GHz. The S5PV210 integrates the Power Vr graphics engine of SGX540 hardware, which…
- Add to cart
-
- Out of Stock
- Arduino Boards
GPS Shield
- 495.00 EGP
- Arduino GPS shield is a GPS module breakout board for Arduino. It can make your Arduino as a GPS receiver with SD storage, it is easy to use for recording the position data into SD card by Arduino It's based on EB-365 GPS module, and the footprints is compatible with Arduino/MEGA boards. The regular GPS pins (RX, TX) can be…
- Read more
-
-
- Out of Stock
- Raspberry Pi Accessories
Heat Sink Set for Raspberry Pi (Blue)
- 30.00 EGP
- This is the heat sink specially made for Raspberry Pi 4B . It contain 3 piece. They will provide better heat dissipation for Raspberry Pi so that your Raspberry Pi may work better and longer.
- Read more
-
-
- Raspberry Pi Accessories
Heat Sink Set for Raspberry Pi 4B Board White 3 PCS
- 30.00 EGP
- This 3-piece aluminum heat sink set is designed specifically for the Raspberry Pi 4B, providing efficient passive cooling for the CPU, RAM, and USB controller chips. The sleek white anodized finish offers both performance and aesthetics, making it perfect for media centers, retro gaming consoles, and embedded projects.
- Add to cart
-
- Controllers
Infrared IR Wireless Remote Control Module HX1838
- 65.00 EGP
- The HX1838 Infrared (IR) Receiver Module is a compact 38kHz demodulator designed to decode signals from TV remotes, IR controllers, and other infrared transmitters. Based on the HS0038/VS1838 sensor, this module provides reliable remote control signal reception for Arduino, Raspberry Pi, and microcontroller projects, enabling wireless automation for smart home devices, robotics, and DIY electronics. With strong anti-interference capability and low power consumption, the HX1838 is ideal for projects requiring wireless remote control without Bluetooth/WiFi.
- Add to cart
-
- Sale!
- Other Boards
IOIO Board – Microcontroller Interface for Android & PC
- Original price was: 800.00 EGP.400.00 EGPCurrent price is: 400.00 EGP.
- The IOIO Board (pronounced "yo-yo") is a versatile development platform that enables easy interfacing between Android devices or PCs and external electronic circuits. Designed for engineers, hobbyists, and educators, the IOIO allows you to control motors, LEDs, sensors, and more using a smartphone or computer, without complex USB or Bluetooth coding.
- Add to cart
-
- Out of Stock
- Controllers
IR General Purpose Remote Control
- 22.00 EGP
- This remote control is a complete module which is the super set of all smaller modules under IR controls like single channel and multi-channel IR remotes. Fitted with microcontroller 89C51 at both the transmitter and receiver’s unit, which makes it programmable at both the ends. can control a robot or other project from across the room. It has 21 buttons…
- Read more
-
-
- Sale!
- Controllers, Programmers
K-TAG Automatic Truck & Car ECU Programming Chip Tuning Tool V7.020
- Original price was: 6,200.00 EGP.5,570.00 EGPCurrent price is: 5,570.00 EGP.
- K-TAG V7.020 – Advanced truck & car ECU and TCU programmer. Read, write, and tune vehicle control units for optimal performance, fuel efficiency, and diagnostics.
- Add to cart
-
- LCD, Raspberry Pi Accessories
LCD HDMI 7 inch Capacitive Touch Screen 1024×600 resolution
- 3,950.00 EGP
- Buy the 7 inch HDMI Touch Display with 1024×600 resolution and capacitive multi-touch. Perfect for Raspberry Pi, PC monitors, and DIY electronic projects. 7 Inch HDMI Touch Display – Capacitive LCD Screen 1024×600
- Add to cart
-
- Developments Boards
LGT8F328P HT42B534 LQFP32 IC Replaces Arduino NANO V3.0
- 215.00 EGP
- The LGT8F328P + HT42B534 (LQFP32) is a powerful, cost-effective drop-in replacement for the Arduino Nano V3.0, offering enhanced performance, lower power consumption, and full compatibility with the Arduino ecosystem. This chipset combines the LGT8F328P MCU (an ATmega328P alternative) with the HT42B534 USB-to-UART converter, ensuring seamless programming and communication.
- Add to cart
-
- Out of Stock
- Lilypad
Lilypad Board
- 121.00 EGP
- Lilypad Board
- Read more
-
-
- Lilypad Accessories
Lilypad Buzzer
- 27.50 EGP
- Lilypad Buzzer
- Add to cart
-
- Lilypad Accessories
Lilypad Coin Cell Battery Holder Cr2032
- 60.50 EGP
- Sure, your flashing, chip-tune playing T-shirt is really cool at the party… but at some point you need to turn it off. And yes, you could just pull the battery, or maybe you’ve even sewn a LilyPad slide switch in-line. Wouldn’t it be nice if there was just a switch on the battery? Well, look no further.
- Add to cart
-
- Lilypad Accessories
Lilypad Led Green
- 20.00 EGP
- These modules are ideally suited to adding a slightly different light display to your project.
- Add to cart
-
- Lilypad Accessories
Lilypad Led Red
- 20.00 EGP
- These modules are ideally suited to adding a slightly different light display to your project
- Add to cart
-
- Lilypad Accessories
Lilypad Led Yellow
- 20.00 EGP
- These modules are ideally suited to adding a slightly different light display to your project
- Add to cart
-
- Lilypad Accessories
Lilypad Pixel Board
- 55.00 EGP
- This LilyPad board will light up in whatever colour you like, you can even chain several together to form a display or an addressable string
- Add to cart
-
- Lilypad Accessories
Lilypad Power Supply Aaa Battery
- 125.00 EGP
- Small inconspicous power supply for the LilyPad Arduino electronics system. AAA battery clip, accepts from 1.2V to 1.5V
- Add to cart
-
- Lilypad Accessories
Lilypad Push Button
- 16.50 EGP
- Lilypad Push Button
- Add to cart
