Search Results for "memory"
-
Cutter Yth-109
Cutter Yth-109
Suitable for cutting wire, electronic feet, trimming plastic products, cutting small metal wire, repairing of electronics industry, jewelry processing, model making and so on.
65.00 EGPCutter Yth-109
65.00 EGP -
WiFi ESP8266 Serial TTL Module ESP-01S
WiFi ESP8266 Serial TTL Module ESP-01S
140.00 EGPWiFi ESP8266 Serial TTL Module ESP-01S
140.00 EGP -
ESP8266 WiFi 4 channel Relay Module
DC 12V ESP8266 4 channel relay board ESP-01 WIFI module 4 channel WIFI relay module for smart home smart furniture
450.00 EGPESP8266 WiFi 4 channel Relay Module
450.00 EGP -
Arduino Uno R3 Italy
This is the new Arduino Uno R3.
In addition to all the features of the previous board, the Uno now uses an ATmega16U2 instead of the 8U2 found on the Uno (or the FTDI found on previous generations).
This allows for faster transfer rates and more memory. No drivers needed for Linux or Mac (inf file for Windows is needed and included in the Arduino IDE), and the ability to have the Uno show up as a keyboard, mouse, joystick, etc.
The Uno R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes. The Uno R3 works with all existing shields but can adapt to new shields which use these additional pins.
Note: The Arduino Uno R3 requires the Arduino 1.0 driver’s folder in order to install properly on some computers. We have tested and confirmed that the R3 can be programmed in older versions of the IDE. However, the first time using the R3 on a new computer, you will need to have Arduino 1.0 installed on that machine.
500.00 EGPArduino Uno R3 Italy
500.00 EGP -
-
Arduino Pro Mini
The Arduino Pro Mini is a microcontroller board based on the ATmega328.
It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, an on-board resonator, a reset button, and holes for mounting pin headers. A six pin header can be connected to an FTDI cable or Sparkfun breakout board to provide USB power and communication to the board.175.00 EGPArduino Pro Mini
175.00 EGP -
ATMega328PU – With Bootloader made in Taiwan (Original)
ATMega328PU – With Bootloader made in Taiwan (Original)
The ATMega328PU is a microcontroller unit manufactured by Microchip Technology, widely known for its versatile use in various embedded systems and DIY electronics projects. Here are the specifications and a description for the ATMega328PU, particularly the version with a bootloader made in Taiwan, presumed to be an original product:
Specifications:
- Microcontroller: ATMega328PU
- Manufacturer: Microchip Technology
- Operating Voltage: 1.8V to 5.5V
- CPU Speed: 20 MHz maximum
- Flash Memory: 32 KB (of which 0.5 KB is used by the bootloader)
- SRAM: 2 KB
- EEPROM: 1 KB
- Digital I/O Pins: 23
- Analog Input Pins: 6
- Communication Interfaces: UART, SPI, I2C/TWI
300.00 EGP -
Arduino Uno SMD China
The Arduino Uno SMD module is a compact and lightweight microcontroller board that packs a lot of features into a small package. Here are some of its key features:
- ATmega328P Microcontroller: The heart of the Arduino Uno SMD module is the ATmega328P microcontroller, which provides 32KB of flash memory and 2KB of SRAM. This powerful chip can handle a wide range of tasks, from controlling motors and sensors to running complex algorithms.
- USB Connectivity: The Arduino Uno SMD module features a built-in USB port, which makes it easy to connect to your computer and upload code. You can also use the USB port to power the board, so you don’t need a separate power source.
- Pin Headers: The Arduino Uno SMD module has a total of 14 digital input/output pins, 6 analog inputs, and a number of other pins for power and ground. These pin headers make it easy to connect sensors, actuators, and other components to the board.
- Wide Compatibility: The Arduino Uno SMD module is compatible with a wide range of software and hardware, including the Arduino IDE, which makes it easy to program even if you’re new to microcontrollers. It also supports a variety of communication protocols, such as I2C, SPI, and UART.
350.00 EGPArduino Uno SMD China
350.00 EGP -
Arduino Duemilanove
The Arduino Duemilanove is a microcontroller board based on the ATmega168 or ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller, simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
110.00 EGPArduino Duemilanove
110.00 EGP -
Arduino Mega 1280
The Arduino Mega 1280 is a microcontroller board based on the ATmega1280. It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button.
220.00 EGPArduino Mega 1280
220.00 EGP -
Arduino Mega ADK 2560
The Arduino MEGA ADK is a microcontroller board based on the ATmega2560. It has a USB host interface to connect with Android based phones, based on the MAX3421e IC. It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs(hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button.
726.00 EGPArduino Mega ADK 2560
726.00 EGP