Search Results for "AC voltage"
-
3Amp 4V-16V DC Motor Driver MDD3A (2 Channels)
Looking for a motor driver for your mobile robot? Want to drive a stepper motor? Worry not! MDD3A is able to control two brushed DC motors or single bipolar/unipolar stepper motor from 4V to 16V.
With discrete MOSFETs H-Bridge design, this motor driver is able to support 3 Amp per channel continuously without any additional heatsink.
625.00 EGP -
3M660-N Microstep Driver
3M660 is a constant torque microstepping driver, voltage range from 24-58VDC, it’s suitable for various 3-phase NEMA23 & NEMA34 hybrid stepper motorWith the build-in constant current chopping circuit similar to servo driver, the motor run stable without vibration and noise in low speed.
990.00 EGP3M660-N Microstep Driver
990.00 EGP -
1.3″ OLED 7 Pins Display – White 128X64
OLED 128×64 dot matrix display module. The characteristics of this display module are high brightness, self-emission, high contrast ratio, slim/thin outline, wide viewing angle, wide temperature range and low power consumption.
165.00 EGP1.3″ OLED 7 Pins Display – White 128X64
165.00 EGP -
Cytron Dual Channel 10A DC Motor Driver Rev 2.0 – MDD10A (10A Each Channel)
This is a dual motor driver which is designed to drive 2 DC motor with high current up to 10A continuously and 30A peak. The driver works in the voltage range from 5 to 25 V. It also includes a fast test switch for driver testing.
This driver supports locked-antiphase and sign-magnitude PWM signal. It uses full solid-state components which result in faster response time and eliminate the wear and tear of the mechanical relay Cytron Dual Channel
1,350.00 EGP -
T8000AC LED RGB Pixel Controller
Led RGB full color controller is the type of point controller,so it can addressable under IC and program control ,it’s very popular in led advertising and decoration project.
598.00 EGP1,199.00 EGPT8000AC LED RGB Pixel Controller
598.00 EGP1,199.00 EGP -
4.8-6V Servo Tester CCPM Consistency Master Checker with Rev
CCPM Servo Consistency Tester
55.00 EGP -
CNC Router Single Axis 4.5A TB6600 Stepper Motor Driver
CNC Router Single Axis
600.00 EGP -
Dual Monster Moto Shield VNH2SP30 DC Motor Driver 30A
The Dual Monster Moto Shield VNH2SP30 DC Motor Driver 2x14A (Peak 30A) is essentially a ramped up version of our Ardumoto motor driver shield. For this Monster Moto Shield, It is replaced the L298 H-bridge with a pair of VNH2SP30 full-bridge motor drivers.
264.00 EGP -
Servo Motor Micro (180) 1.6 kg.cm Plastic Gears “SG90”
Sg90 Servo Motor
The SG90 is a small-sized, low-cost servo motor that is commonly used in small-scale projects and hobbyist applications. It is a popular choice among students, hobbyists, and DIY enthusiasts due to its affordability and ease of use. The SG90 is a type of rotary actuator that is capable of precise angular positioning and speed control.
Specifications:
- Operating Voltage: 4.8V – 6V DC
- Stall Torque: 1.8 kg-cm (4.8V); 2.2 kg-cm (6V)
- Operating Speed: 0.1 s/60° (4.8V); 0.08 s/60° (6V)
- Rotational Range: 180°
- Dimensions: 22.2 x 11.8 x 31 mm
- Weight: 9g
Usage:
The SG90 servo motor can be used in a variety of applications, including robotics, model making, remote control vehicles, and other small-scale projects. Its compact size and low cost make it an ideal choice for hobbyists and students who are just starting out with electronics and programming.The SG90 servo motor can be controlled using a microcontroller or a dedicated servo controller. Most microcontrollers have a built-in pulse-width modulation (PWM) feature that can be used to control the servo motor’s position and speed. The SG90 servo motor uses a standard three-pin connector, with the pinout being VCC, GND, and Signal.
To control the SG90 servo motor, you need to send it a pulse signal with a frequency of 50 Hz and a pulse width between 1 ms to 2 ms. The pulse width determines the position of the servo motor, with 1 ms corresponding to the minimum position and 2 ms corresponding to the maximum position. The pulse signal should be sent continuously to maintain the position of the servo motor.
The SG90 servo motor is a popular choice among hobbyists and students due to its affordability and ease of use. It is a versatile motor that can be used in a variety of applications, including robotics, model making, and remote control vehicles. With its compact size and low cost, the SG90 servo motor is an ideal choice for beginners who are just starting out with electronics and programming.
110.00 EGP -
3D Printer Ultimaker V. 1.5.7 Pcb Compatible With Ramps Arduino Mega 2560 R3
The Ultimaker 1.5.7 board is an Arduino Mega shield, geared for the DIY 3D printer market and has some great features not found on the RAMPS compatible boards such as higher input voltage ability and power connectivity options.
Controls up to 5 stepper motors and Compatible with Pololu stepper driver boards 3D Printer Ultimaker
390.00 EGP450.00 EGP3D Printer Ultimaker V. 1.5.7 Pcb Compatible With Ramps Arduino Mega 2560 R3
390.00 EGP450.00 EGP -
L293D Arduino Dual Motor Shield
L293 Motor Driver Shield for DC motor/ stepper motor / servo motor
115.00 EGPL293D Arduino Dual Motor Shield
115.00 EGP