Search Results for "PCB"
-
3D Printer 3mm Mk3 Aluminium Heatbed
3D Printer 3mm Mk3 Aluminium Heatbed
220.00 EGP3D Printer 3mm Mk3 Aluminium Heatbed
220.00 EGP -
Soil Moisture Detection Humidity Sensor
This is a simple and easy moisture sensor can be used for the detection of soil moisture, when soil water shortage, the module outputs a high level, whereas the output low level. Using the sensor produces a watering device automatically, let you don’t choose and employ persons to manage the plants in the garden.
65.00 EGPSoil Moisture Detection Humidity Sensor
65.00 EGP -
Relay Module 4 Channel – 5V DC
Relay Module 5Vdc – 4 Relay For Arduino & MCU H/L Trigger
150.00 EGPRelay Module 4 Channel – 5V DC
150.00 EGP -
Reed Switch Module
Reed switch is a kind of passive electronic switching component with contacts with a simple structure, small size and easy to control. It consists of a sealed glass envelope where there are two ferrous elastic reeds and is filled with inert gas called rhodium
35.00 EGPReed Switch Module
35.00 EGP -
ESP8266 Wifi Transceiver Module ESP03
ESP8266 Small transceiver module Wi-Fi-based chip, compatible with standard 802.11 b / g / n 2.4 GHz, has SPI interface, 7 GPIO, TCP / IP stack and antenna ceramic PCB.
Ideal for wireless sensor networks, home automation, building automation, and custom applications. Power: 3.3 Vdc, dimensions (mm): 17.4 x 12.2.
66.00 EGPESP8266 Wifi Transceiver Module ESP03
66.00 EGP -
ESP-07 ESP8266 UART Serial To Wifi Module For Arduino, Raspberry Pi
ESP8266 ESP-07 Serial Wi-Fi Wireless Module is a new player in this field.
It’s tiny (25mm x 15mm), with simple pin connections, using serial TX/RX to send and receive Ethernet buffers, and similarly, using serial commands to query and change configurations of the Wi-Fi module.
This is quite convenient as it only requires two wires (TX/RX) to communicate between a micro-controller and Wi-Fi, but more importantly, it offloads Wi-Fi-related tasks to the module, allowing the micro-controller code to be very light-weighted.
66.00 EGP -
Photosenstive Diode Module
Photosenstive diode module is the most sensitive for environmental light intensity, generally used for detecting the ambient brightness and intensity.
In most of the cases with photosenstive resistance sensor module universal, it is difference that is the photosensitive diode module directional well and can sense the fixed direction of light source
27.50 EGPPhotosenstive Diode Module
27.50 EGP -
FC-51 Infrared Obstacle Avoidance Proximity Sensor Module
FC-51 Infrared Obstacle Avoidance Proximity Sensor Module
30.00 EGP -
TCRT5000 Infrared Reflective Switch Line Tracking Sensor
TCRT5000 infrared sensor emits infrared emitting diode continuously when no infrared rays emitted or reflected back is reflected back but the strength is not large enough, the phototransistor has been in the off state, and the output terminal of the module is high, indicating that the diode has been in the off state; in the object to be detected within the detection range, and the intensity of the reflected infrared rays is large enough, phototransistor saturated, and the output terminal of the module is low, the indicator LED is lit.
35.00 EGP -
LV25-P LEM Voltage Transducer
A PCB mounting voltage transducer based on the Hall effect. The unit provides galvanic isolation between primary and secondary circuits. To enable a voltage to be measured a current proportional to the measured voltage must be collected through an external resistor, selected by the user, in series with the primary circuit of the unit.
1,188.00 EGPLV25-P LEM Voltage Transducer
1,188.00 EGP -
Arduino Yun Orginal
Arduino Yun Orginal
1,850.00 EGP1,900.00 EGPArduino Yun Orginal
1,850.00 EGP1,900.00 EGP -
HR202 Humidity Sensor Module
HR202 is a new kind of humidity-sensitive resistor made from organic macromolecule materials, it can be used in occasions like: hospitals, storage, workshop, textile industry, tobaccos, pharmaceutical field, meteorology, etc.
38.50 EGPHR202 Humidity Sensor Module
38.50 EGP