Search Results for "PCB"
-
-
Flexible LED Strip 5M 12V Rgb
5050 72W 12V 300 Diodes 16.4ft Roll IP65 Silicon covering waterproof RGB Led Strip Light . It is 5050 60leds/m, total is 300 leds per 5m roll. it is waterproof with silicone glue covering , and with 3M adhesive tape on the back.It can work directly by the remote controller and power supply. We also can customize according to your request. 5050 RGB led strip light. Welcome OEM and ODM.
250.00 EGPFlexible LED Strip 5M 12V Rgb
250.00 EGP -
Stepper Motor ULN2003 Driver Module
The ULN2003 stepper motor driver PCB provides a direct drive interface between your microcontroller and stepper motor. The PCB provides 4 inputs for connection to your microcontroller, power supply connection for the stepper motor voltage, and ON/OFF jumper, a direct connect stepper motor header and 4 LEDs to indicate stepping state
35.00 EGPStepper Motor ULN2003 Driver Module
35.00 EGP -
3800W Voltage Regulator, Dimmer, Speed, Temperature Adjustment
3800W Voltage Regulator, Dimmer, Speed, Temperature Adjustment
210.00 EGP -
-
ESP8266 ESP-12F Wifi Transceiver Wireless Module
The Latest ESP-12F ESP8266 Wi-Fi Module AP & Station Remote Serial Wireless IoT Board is an integrated chip designed for the needs of a new connected world.
It can handle all the necessary overhead for communicating with your network, such as TCP/IP stack and communicating with your 802.11 networks.
It is completely addressable over SPI and UART protocols allowing you to connect your sensors or project directly to it through its GPIO’s. ESP8266 is a low-cost Wi-Fi chip with a full TCP/IP stack and MCU (Micro Controller Unit) capability.
ESP8266 Serial Wi-Fi Wireless Transceiver Module is a self-contained SOC with an integrated TCP/IP protocol stack that can give any microcontroller access to your Wi-Fi network.
ESP8266 Serial Wifi Wireless Transceiver Module is capable of either hosting an application or offloading all Wi-Fi networking functions from another application processor.
Each ESP8266 module comes pre-programmed with an AT command set firmware, meaning, you can simply hook this up to your Arduino device and get about as much Wi-Fi-ability as a Wi-Fi Shield offers.
The ESP8266 module is an extremely cost-effective board with a huge, and ever-growing, community.
ESP8266 Serial Wi-Fi Wireless Transceiver Module has a powerful enough onboard processing and storage capability that allows it to be integrated with the sensors and other application-specific devices through its GPIOs with minimal development up-front and minimal loading during runtime.
Its high degree of on-chip integration allows for minimal external circuitry, including the front-end module, which is designed to occupy a minimal PCB area.
The ESP8266 supports APSD for VoIP applications and Bluetooth co-existence interfaces, it contains a self-calibrated RF allowing it to work under all operating conditions and requires no external RF parts.
185.00 EGP -
Arduino L9110 Motor Driver Module
Double L9110S chip motor drive,
Module Supply Voltage: 2.5~12V,
Suitable Motor: the motor operating voltage between 2.5V~12V,
the maximum operating current of 0.8A,
Can drive two DC motors, or a 4-wire 2-phase stepping motor;
PCB board size: 2.8cm x 2.1cm,
compact size,
easy for assembly,
Provides with a fixed mounting hole,
diameter: 3mm;
Module interface specification:
The 6-pin black curved pin description:
VCC: external 2.5V~12V voltage,
GND: external GND,
The IA1: external microcontroller IO port,
The IB1: external microcontroller IO port,
IA2: external in microcontroller IO port,
IB2: external microcontroller IO port,
4-Pin Green Terminal Description:
OA1 / OB1 connect to DC motor 2-pin,
no direction;
OA2 / OB2 connects to DC motor 2-pin,
no direction,
Module for use: VCC and GND module power indicator light is on,
IA1 input high, IA1 input low,
(OA1 OB1) motor is transferred,
IA1 input low,IA1 high level input,
(OA1 OB1) motor reversal,
IA2 input high, IA2 input low,
(OA2 Ob2) motor is transferred,
IA2 input low,IA2 input high,
(OA2 Ob2) of motor reversal.
-
Tweezer Eagle Ts-15
Tweezer Eagle Ts-15
* Ideal for assembly work such as soldering PCBs or replacing parts.
* Eagle-beak tweezers with 45° bent tip.
10.00 EGPTweezer Eagle Ts-15
10.00 EGP -
5V 60A Power Supply
5V 60A 300W Universal Regulated Switching Power Supply
-
Output voltage can be adjusted 15%. Three sets of output Channel. (Indoor use only!)
-
High-quality raw materials- Pure Copper Inductors, High-performance Transformers, Dual-capacity Electrolytic Capacitors is The Guarantee of High-quality 5V 60A Switching Power Supply.
Multiple reprotection – With Over-voltage Protection, Overload Protection, Overheating Protection and Prevent Short Circuit.
-
Widely used – High quality Switch Power Supply it is perfect for all 5V power supply 60a projects, such as WS2811 2801 WS2812B WS2813 LED Strip Pixel light, CCTV Camera, Security System, Computer Project, etc.
-
Enough 300W output power and 5V stable output voltage will protect your electronic products from destruction, and it comes with cooling fan and many holes on the metal case, which makes heat dissipation more efficient.
500.00 EGP5V 60A Power Supply
500.00 EGP -
-
MG16129-B Multifunctional LED Helping Third
MG16129-B Multifunctional LED Helping Third
205.00 EGPMG16129-B Multifunctional LED Helping Third
205.00 EGP -
DRV8825 Stepper Motor Driver (md20b)
The DRV8825 stepper motor driver carrier is a breakout board for DRV8825 microstepping bipolar stepper motor driver. The module has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver board, so it can be used as a higher-performance drop-in replacement for those boards in many applications. The DRV8825 features adjustable current limiting, overcurrent and overtemperature protection, and six microstep resolutions (down to 1/32-step). It operates from 8.2 – 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (rated for up to 2.2 A per coil with sufficient additional cooling).
120.00 EGPDRV8825 Stepper Motor Driver (md20b)
120.00 EGP -
Fan 12V 3x3CM
A cooling fan is widely used to extend life of your system by cooling off heat of the system that many electrical components are mounted in a very high density and dissipating heat.
22.00 EGPFan 12V 3x3CM
22.00 EGP