Stepper Motor Drive Simple Controller – PWM & Pulse Generator
In Stock
Categories: Motor Drivers
Description
Stepper Motor Drive Simple Controller – PWM & Pulse Generator
Product Description
The Stepper Motor Drive Simple Controller is a compact pulse and PWM signal generator designed to control compatible external stepper motor drivers. It provides adjustable pulse-frequency output for controlling motor speed, along with forward and reverse direction selection. This allows users to operate a stepper motor system without requiring a microcontroller or writing control software.
The controller generates the step pulses required by an external stepper motor driver. Motor speed is adjusted using the onboard potentiometer, which changes the output pulse frequency. Dedicated buttons provide clockwise (CW) and counterclockwise (CCW) direction control, while the selectable frequency ranges allow the output to be matched to different motor-speed requirements.
The board offers three selectable frequency ranges: low, medium, and high. These ranges are selected using onboard jumpers, providing flexibility for applications that require slow positioning or higher-speed motor operation. The output frequency can also be monitored through the PUL and GND measurement connections.
The controller supports both common-anode and common-cathode wiring configurations, allowing it to interface with compatible stepper motor drivers that use STEP/PUL, DIR, and ENA control inputs. The enable connection can be used for start/stop control when connected according to the selected wiring configuration.
Two power-input options are listed for this controller family: a low-voltage DC input and a higher-voltage input. The applicable input terminals and voltage limits depend on the specific board version, so only one power-input group should be connected at a time. Check the board markings and wiring diagram before applying power.
This module is suitable for CNC projects, stepper motor testing, automation systems, and laboratory prototypes. It generates control signals rather than driving the motor directly, so a compatible stepper motor driver, motor, and power supply are required for operation.
Features
Pulse and PWM signal generation
Adjustable motor speed through an onboard potentiometer
Forward and reverse direction control
Three selectable frequency ranges
Jumper-based frequency selection
Common-anode and common-cathode connections
Start/stop control through compatible ENA connections
PUL and GND frequency measurement terminals
Compatible with external stepper motor drivers
Compact controller board
Specifications
Parameter | Specification |
|---|---|
Product Type | Stepper Motor Pulse / PWM Controller |
Main Function | Pulse and PWM Signal Generation |
Motor Control | Through External Stepper Driver |
Direction Control | CW / CCW |
Speed Adjustment | Onboard Potentiometer |
Frequency Selection | 3 Ranges via Jumpers |
Low Frequency | 82Hz–2.3kHz |
Medium Frequency | 590Hz–15.8kHz |
High Frequency | 5.8kHz–127kHz |
Connection Modes | Common Anode / Common Cathode |
Enable Control | ENA Connection |
Frequency Measurement | PUL / GND |
Power Input | DC 12V or DC 15–80V, depending on input terminals* |
Dimensions | Approx. 73 × 51 × 37mm |
Weight | Approx. 44g |
Power-input specifications vary between listings and board revisions. Verify the input-terminal markings and the supplied board's documentation before connecting a power source.
Applications
Stepper motor speed control
CNC machine control and testing
3D printer stepper driver testing
Stepper motor driver evaluation
Industrial automation prototypes
Motion-control experiments
Laboratory motor testing
Educational electronics projects
DIY robotics
Pulse and PWM signal generation
Frequently Bought Together
Related Products
Stepper Motor Drive Simple Controller – PWM & Pulse Generator
335.00 EGP