Arduino Shield “Monster Moto – Motor Driver 30A” (1 channel)
In Stock
Categories: Motor Drivers
Overview
Description
Arduino Monster Moto Motor Driver 30A – Single Channel VNH2SP30
Product Description
The Arduino Monster Moto Motor Driver 30A – Single Channel is a high-current motor driver board based on the VNH2SP30 full-bridge motor driver IC. It is designed to control one brushed DC motor in robotics, automation, and microcontroller-based projects that require higher motor current than standard low-power driver modules can provide.
The board uses an H-bridge output stage to control motor direction, allowing forward and reverse operation. Motor speed can be adjusted using a PWM signal generated by an Arduino or another compatible microcontroller. The driver supports PWM frequencies up to 20kHz, providing flexibility when configuring motor-control applications.
The module is advertised with a maximum current rating of 30A peak, while its practical continuous current capability is approximately 14A under suitable operating conditions. Actual current handling depends on the motor load, wiring, PCB design, and thermal conditions. Additional cooling may be required when operating under demanding loads.
An integrated current-sensing output allows motor current to be monitored through an Arduino analog input. This can be useful when developing motor-control systems that require current feedback or load monitoring. The driver also includes thermal shutdown and undervoltage and overvoltage protection to help protect the circuit during abnormal operating conditions.
This version is designed for one brushed DC motor and is a single-channel alternative to the original dual-channel SparkFun Monster Moto Shield. Unlike the original stackable Arduino shield, this compact clone version does not pass Arduino UNO pins through the board. It can instead be connected to an Arduino or another controller using its available wiring connections.
With its high-current output, PWM speed control, direction control, and current-sensing capability, the Monster Moto VNH2SP30 is suitable for mobile robots, DC motor projects, and other compatible low-voltage motor-control applications.
Features
VNH2SP30 full-bridge motor driver IC
Single-channel control for one brushed DC motor
30A maximum peak current rating
Approximately 14A practical continuous current
Forward and reverse motor control
PWM speed control up to 20kHz
Current-sensing output for Arduino analog input
Integrated thermal shutdown
Undervoltage and overvoltage protection
Compatible with Arduino and other microcontrollers
Specifications
Parameter | Specification |
|---|---|
Product Type | DC Motor Driver Board |
Driver IC | VNH2SP30 |
Driver Architecture | Full H-Bridge |
Number of Channels | 1 |
Supported Motor | Brushed DC Motor |
Maximum Supply Voltage | 16V |
Peak Current Rating | 30A |
Practical Continuous Current | Approx. 14A |
PWM Frequency | Up to 20kHz |
Speed Control | PWM |
Direction Control | Forward / Reverse |
Current Sensing | Analog Output |
Thermal Protection | Yes |
Undervoltage Protection | Yes |
Overvoltage Protection | Yes |
Controller Compatibility | Arduino and compatible microcontrollers |
Board Type | Single-channel Monster Moto variant |
Applications
Arduino DC motor-control projects
Mobile robotics
High-current brushed DC motor applications
DIY robotic vehicles
Automated mechanical systems
PWM motor-speed control
Bidirectional motor-control projects
Microcontroller-based automation
Educational electronics and robotics projects
Frequently Bought Together
Related Products
Arduino Shield “Monster Moto – Motor Driver 30A” (1 channel)
310.00 EGP