ADC0809 A/D Converter
Roll over image to zoom in
55.00 EGP
ADC0809CCN Features
- Easy interface to all microprocessors
- Operates ratiometrically or with 5 VDC or analog span adjusted voltage reference
- No zero or full-scale adjust required
- 8-channel multiplexer with address logic
- 0V to 5V input range with single 5V power supply
- Outputs meet TTL voltage level specifications
- Standard hermetic or molded 28-pin DIP package
- 28-pin molded chip carrier package
ADC0809CCN Pin Configuration
Pin Number | Pin Name | Description |
---|---|---|
1 | IN3 | Analog Input 3 |
2 | IN4 | Analog Input 4 |
3 | IN5 | Analog Input 5 |
4 | IN6 | Analog Input 6 |
5 | IN7 | Analog Input 7 |
6 | START | Start Conversion |
7 | EOC | End of Conversion |
8 | 2(-5) | Tri-State Output Bit 5 |
9 | OUT EN | Output Enable |
10 | CLK | Clock |
11 | Vcc | Positive Supply |
12 | Vref+ | Positive Voltage Reference Input |
13 | GND | Ground |
14 | 2(-7) | Tri-State Output Bit 7 |
15 | 2(-6) | Tri-State Output Bit 6 |
16 | Vref- | Voltage Reference Negative Input |
17 | 2(-8) | Tri-State Output Bit 8 |
18 | 2(-4) | Tri-State Output Bit 4 |
19 | 2(-3) | Tri-State Output Bit 3 |
20 | 2(-2) | Tri-State Output Bit 2 |
21 | 2(-1) | Tri-State Output Bit 1 |
22 | ALE | Address Latch Enable |
23 | ADD C | Address Input C |
24 | ADD B | Address Input B |
25 | ADD A | Address Input A |
26 | IN0 | Analog Input 0 |
27 | IN1 | Analog Input 1 |
28 | IN2 | Analog Input 2 |