-
Arduino Mega 2560 China R3
The Arduino Mega is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHzcrystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila.
1,500.00 EGPArduino Mega 2560 China R3
1,500.00 EGP -
HW-183 Board DC-DC Step Up Power Module 2A B6287
HW-183 Board DC-DC Step Up Power Module 2A B6287
- The whole network’s smallest adjustable boost module can be easily installed in a variety of small equipment.
- The module supports Micro USB input, a USB charger or mobile power supply can easily get to it 9V, 12V, 15V, 18V, 24V, easy to use.
32.00 EGP -
-
Arduino UNO R3 Box Case Shell
Arduino CASE Transparent ACRYLIC Case Arduino Uno R3 Case Protective Shell Gloss Plastic Box Water Clear Cover Acrylic Enclosure Arduino Uno R3 Case
33.00 EGPArduino UNO R3 Box Case Shell
33.00 EGP -
125.00 EGP
Attiny85 Arduino Micro Development Board
125.00 EGP -
Arduino Yun Orginal
Arduino Yun Orginal
1,850.00 EGP1,900.00 EGPArduino Yun Orginal
1,850.00 EGP1,900.00 EGP -
Arduino Uno R3 Italy
This is the new Arduino Uno R3.
In addition to all the features of the previous board, the Uno now uses an ATmega16U2 instead of the 8U2 found on the Uno (or the FTDI found on previous generations).
This allows for faster transfer rates and more memory. No drivers needed for Linux or Mac (inf file for Windows is needed and included in the Arduino IDE), and the ability to have the Uno show up as a keyboard, mouse, joystick, etc.
The Uno R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes. The Uno R3 works with all existing shields but can adapt to new shields which use these additional pins.
Note: The Arduino Uno R3 requires the Arduino 1.0 driver’s folder in order to install properly on some computers. We have tested and confirmed that the R3 can be programmed in older versions of the IDE. However, the first time using the R3 on a new computer, you will need to have Arduino 1.0 installed on that machine.
500.00 EGPArduino Uno R3 Italy
500.00 EGP -
Arduino Uno SMD China
The Arduino Uno SMD module is a compact and lightweight microcontroller board that packs a lot of features into a small package. Here are some of its key features:
- ATmega328P Microcontroller: The heart of the Arduino Uno SMD module is the ATmega328P microcontroller, which provides 32KB of flash memory and 2KB of SRAM. This powerful chip can handle a wide range of tasks, from controlling motors and sensors to running complex algorithms.
- USB Connectivity: The Arduino Uno SMD module features a built-in USB port, which makes it easy to connect to your computer and upload code. You can also use the USB port to power the board, so you don’t need a separate power source.
- Pin Headers: The Arduino Uno SMD module has a total of 14 digital input/output pins, 6 analog inputs, and a number of other pins for power and ground. These pin headers make it easy to connect sensors, actuators, and other components to the board.
- Wide Compatibility: The Arduino Uno SMD module is compatible with a wide range of software and hardware, including the Arduino IDE, which makes it easy to program even if you’re new to microcontrollers. It also supports a variety of communication protocols, such as I2C, SPI, and UART.
350.00 EGPArduino Uno SMD China
350.00 EGP -
Arduino Pro Mini
The Arduino Pro Mini is a microcontroller board based on the ATmega328.
It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, an on-board resonator, a reset button, and holes for mounting pin headers. A six pin header can be connected to an FTDI cable or Sparkfun breakout board to provide USB power and communication to the board.175.00 EGPArduino Pro Mini
175.00 EGP -
-
Arduino Mega ADK 2560
The Arduino MEGA ADK is a microcontroller board based on the ATmega2560. It has a USB host interface to connect with Android based phones, based on the MAX3421e IC. It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs(hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button.
726.00 EGPArduino Mega ADK 2560
726.00 EGP -
Arduino Mega 2560 Italy R3
The Arduino Mega 2560 is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega 2560 board is compatible with most shields designed for the Uno and the former boards Duemilanove or Diecimila.
The Mega 2560 is an update to the Arduino Mega, which it replaces.
1,320.00 EGPArduino Mega 2560 Italy R3
1,320.00 EGP
Shop By Department
- Arduino Shields
- Audio and Sound
- Batteries & Accessories
- Cables/Wires
- Classic Control Components
- Components
- Developments Boards
- Integrated Circuits
- Light Source and Display
- Mechanical Parts
- Measuring Devices
- Modules
- Motors
- Power Sources
- Programmers
- Robotics
- Sensors
- Switches
- Tools
- Terminals & Connectors
- Inverters
- Camera
- Mobile Accessories