-
ESP32 Development Board (WIFI and Bluetooth)
ESP32 Development Board (WIFI and Bluetooth)
400.00 EGPESP32 Development Board (WIFI and Bluetooth)
400.00 EGP -
DC 6V-90V 15A PWM DC Motor Speed Governor Controller PLC
This DC Motor Speed Regulator controls the speed of a DC motor by adjusting Pulse-Width-Modulated (PWM).
It’s perfect for applications like fans, etc. providing a nice adjustment of motor speed.
187.00 EGP -
44-Key RGB LED Controller with IR Remote (12VDC)
44-Key RGB LED Controller with IR Remote (12VDC)
55.00 EGP -
12V 24-Key LED Strip IR Remote Controller with Controller Box
12V 24-Key LED Strip IR Remote Controller with Controller Box for 3528 5050 SMD RGB LED Strip Lights
24.00 EGP -
IR Control Module Receive HX1838
Infra-Red remote and Receiver module
emits a modulated IR signal (38 kHz carrier frequency, 940 nm wavelength).
It has 21 buttons, including directional and number entry buttons, and it uses the NEC encoding type and sends address bytes 0x00 and 0xBF followed by a data code between 0 and 26 (it skips 3, 7, 11, 15, 19 and 23).
65.00 EGPIR Control Module Receive HX1838
65.00 EGP -
USB ASP AVR Programming Device for ATMEL Processors
USBASP AVR USB Programmer
160.00 EGP -
Ql1201 Universal Programming Module For ICD2 And Pickit2
This is an easy to use Universal Programming Module for ICD2,MCD2,ICD2.5,PICKIT2,PICKIT3,ICD3,QL200,QL200B
490.00 EGP -
Arduino Yun Orginal
Arduino Yun Orginal
1,850.00 EGP1,900.00 EGPArduino Yun Orginal
1,850.00 EGP1,900.00 EGP -
Arduino Uno R3 Italy
This is the new Arduino Uno R3.
In addition to all the features of the previous board, the Uno now uses an ATmega16U2 instead of the 8U2 found on the Uno (or the FTDI found on previous generations).
This allows for faster transfer rates and more memory. No drivers needed for Linux or Mac (inf file for Windows is needed and included in the Arduino IDE), and the ability to have the Uno show up as a keyboard, mouse, joystick, etc.
The Uno R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes. The Uno R3 works with all existing shields but can adapt to new shields which use these additional pins.
Note: The Arduino Uno R3 requires the Arduino 1.0 driver’s folder in order to install properly on some computers. We have tested and confirmed that the R3 can be programmed in older versions of the IDE. However, the first time using the R3 on a new computer, you will need to have Arduino 1.0 installed on that machine.
500.00 EGPArduino Uno R3 Italy
500.00 EGP -
Arduino Uno SMD China
The Arduino Uno SMD module is a compact and lightweight microcontroller board that packs a lot of features into a small package. Here are some of its key features:
- ATmega328P Microcontroller: The heart of the Arduino Uno SMD module is the ATmega328P microcontroller, which provides 32KB of flash memory and 2KB of SRAM. This powerful chip can handle a wide range of tasks, from controlling motors and sensors to running complex algorithms.
- USB Connectivity: The Arduino Uno SMD module features a built-in USB port, which makes it easy to connect to your computer and upload code. You can also use the USB port to power the board, so you don’t need a separate power source.
- Pin Headers: The Arduino Uno SMD module has a total of 14 digital input/output pins, 6 analog inputs, and a number of other pins for power and ground. These pin headers make it easy to connect sensors, actuators, and other components to the board.
- Wide Compatibility: The Arduino Uno SMD module is compatible with a wide range of software and hardware, including the Arduino IDE, which makes it easy to program even if you’re new to microcontrollers. It also supports a variety of communication protocols, such as I2C, SPI, and UART.
350.00 EGPArduino Uno SMD China
350.00 EGP -
Arduino Pro Mini
The Arduino Pro Mini is a microcontroller board based on the ATmega328.
It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, an on-board resonator, a reset button, and holes for mounting pin headers. A six pin header can be connected to an FTDI cable or Sparkfun breakout board to provide USB power and communication to the board.175.00 EGPArduino Pro Mini
175.00 EGP -
Shop By Department
- Arduino Shields
- Audio and Sound
- Batteries & Accessories
- Cables/Wires
- Classic Control Components
- Components
- Developments Boards
- Integrated Circuits
- Light Source and Display
- Mechanical Parts
- Measuring Devices
- Modules
- Motors
- Power Sources
- Programmers
- Robotics
- Sensors
- Switches
- Tools
- Terminals & Connectors
- Inverters
- Camera
- Mobile Accessories