Search Results for "linear"
-
-
Rotary Potentiometer (20 KOhm)
20K Ohm Potentiometer
6.00 EGPRotary Potentiometer (20 KOhm)
6.00 EGP -
-
Rotary Potentiometer (100 KOhm)
100K Ohm Potentiometer
6.00 EGPRotary Potentiometer (100 KOhm)
6.00 EGP -
-
5V 2A Power Supply
5V 2A – 10W– DC Power Supply
A switched-mode power supply is an electronic power supply that incorporates a switching regulator to convert electrical power efficiently. Like other power supplies, an SMPS transfers power from a DC or AC source (often mains power) to DC loads, such as a personal computer, while converting voltage and current characteristics. Unlike a linear power supply, the pass transistor of a switching-mode supply continually switches between low-dissipation, full-on and full-off states, and spends very little time in the high dissipation transitions, which minimizes wasted energy.
150.00 EGP5V 2A Power Supply
150.00 EGP -
WiFi ESP8266 Serial TTL Module ESP-01S
WiFi ESP8266 Serial TTL Module ESP-01S
140.00 EGPWiFi ESP8266 Serial TTL Module ESP-01S
140.00 EGP -
GY-61 DXL335 3-Axis Accelerometer Module
GY-61 ADXL335 Module is a small, thin, low-power, complete 3-axis accelerometer with signal conditioned voltage outputs.
The ADXL335 Module 3-axis Analog Output Accelerometer measures acceleration with a minimum full-scale range of ±3 g.
It can measure the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion, shock, or vibration.
This breakout board comes with an onboard voltage regulator and works at both 3.3V & 5V (3-5V).
An accelerometer is an electro-mechanical device that will measure acceleration forces.
These forces may be static, like the constant force of gravity pulling at your feet, or they could be dynamic – caused by moving or vibrating the accelerometer.
180.00 EGPGY-61 DXL335 3-Axis Accelerometer Module
180.00 EGP -
GY-65 BMP085 Atmospheric Pressure Altimeter Module
GY-65 BMP085 is a high precision, ultra-low power consumption pressure sensors, can be applied to mobile devices. Its performance, the absolute accuracy of the minimum can reach 0.03hPa, and very low power consumption, only 3A.
BMP085 powerful 8-pin ceramic-lead chip carrier (LCC) ultra-thin package, through the I2C bus can be connected directly with a variety of microprocessor.
72.00 EGP -
-
LA55-P LEM Current Transducer
This current transducer is used for the electronic measurement of currents (DC, AC, pulsed, mixed) with galvanic separation between the primary circuit and the secondary circuit. _x000D__x000D_
440.00 EGPLA55-P LEM Current Transducer
440.00 EGP -
LV25-P LEM Voltage Transducer
A PCB mounting voltage transducer based on the Hall effect. The unit provides galvanic isolation between primary and secondary circuits. To enable a voltage to be measured a current proportional to the measured voltage must be collected through an external resistor, selected by the user, in series with the primary circuit of the unit.
1,188.00 EGPLV25-P LEM Voltage Transducer
1,188.00 EGP