Search Results for "linear"
-
1000mm Ball Screw With Nut for SFU1605
1000mm Ball Screw With Nut for SFU1605
1,320.00 EGP1000mm Ball Screw With Nut for SFU1605
1,320.00 EGP -
350mm Ball Screw With Nut for SFU1605
350mm Ball Screw With Nut for SFU1605
880.00 EGP350mm Ball Screw With Nut for SFU1605
880.00 EGP -
200mm Ball Screw With Nut for SFU1605
200mm Ball Screw With Nut for SFU1605
850.00 EGP200mm Ball Screw With Nut for SFU1605
850.00 EGP -
1M Industrial V slot Aluminum Rail Profile 2040 Silver Color
1M Industrial V slot Aluminum Rail Profile 2040 Silver Color
220.00 EGP -
12mm KFL001 Pillow Self-Aligning Flange Bearing
This 12mm Inner Diameter Zinc Alloy Pillow Block Flange Bearing KFL001 is a quality flanged ball bearing end mount, widely used in CNC and 3D printing applications. Made from a zinc-aluminum alloy, which supports linear shafts, leadscrews or ball screws. Secured using two grub screws, this bearing mount is a convenient option for your project or CNC machine.
55.00 EGP -
AMS1117 5V to 3.3V DC-DC Step-Down Power Supply Buck Module 800mA
3.3V DC-DC Step-Down Power Supply To 5V Buck Module AMS1117 Automatic Automatic Adjustable Boost Board Start Limit Voltage11.00 EGP -
Water Depth and Water Pressure Sensor
This is an amazing digital pressure sensor from Intersema has wide range applications.The MS5540C pressure sensor measures Absolute water or air pressure. It also measure temperature at the same time. So you can use it for measuring water depth in sea or water level in tank. It can be also be used with different fluids measurements such as oil. You might use it also with air for measuring altitude (barometer) and temperature.
800.00 EGPWater Depth and Water Pressure Sensor
800.00 EGP -
GT2 6MM Timing Belt (1M) Black
For 3D Printing applications, it gives better smoothness and accuracy of positioning, resulting in better printing quality. GT2 timing belt system especially suited for linear movement and positioning applications.
40.00 EGPGT2 6MM Timing Belt (1M) Black
40.00 EGP -
5x5x25mm Flexible Movement Coupling
Connect motor shaft to anything else with a set-screw coupler. These couplers are made of machined aluminum and have a spiral cut that makes them slightly flexible so they can be fit to two shafts even if they are not perfectly co-linear and will help reduce bending effects.
The way they are cut, create a spring effect in the X Y & Z linear axis but not in the rotational axis. That means that you will not get increased backlash – so they’re suitable for precision CNC work.
This coupler will connect two shafts of 5mm diameter. Comes with two sets of double set-screws (two per side) for secure attachment. You’ll need a 2mm allen wrench to tighten/loosen the set-screws.
56.00 EGP5x5x25mm Flexible Movement Coupling
56.00 EGP -
7805 Positive Voltage Regulator 5V
The 7805 is a fixed voltage linear regulator that outputs 5V at up to 1A current with an input voltage range of 7 – 35V.
7.00 EGP7805 Positive Voltage Regulator 5V
7.00 EGP -
-
Rotary Potentiometer (50 KOhm)
50K Ohm Potentiometer
6.00 EGPRotary Potentiometer (50 KOhm)
6.00 EGP