Search Results for "module"
-
44-Key RGB LED Controller with IR Remote (12VDC)
44-Key RGB LED Controller with IR Remote (12VDC)
55.00 EGP -
-
DRV8825 Stepper Motor Driver (md20b)
The DRV8825 stepper motor driver carrier is a breakout board for DRV8825 microstepping bipolar stepper motor driver. The module has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver board, so it can be used as a higher-performance drop-in replacement for those boards in many applications. The DRV8825 features adjustable current limiting, overcurrent and overtemperature protection, and six microstep resolutions (down to 1/32-step). It operates from 8.2 – 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (rated for up to 2.2 A per coil with sufficient additional cooling).
120.00 EGPDRV8825 Stepper Motor Driver (md20b)
120.00 EGP -
Fan 12V 0.08A 4x4CM
Suitable for use in small equipment (space saving) for cooling electrical equipment / LEDs / components / modules / housing CCTV / DVR heat.
50.00 EGPFan 12V 0.08A 4x4CM
50.00 EGP -
Sunfounder AD/DA Converter PCF8591
The PCF8591 is a single-chip, single-supply and low-power 8-bit CMOS data acquisition device with four analog inputs, one analog output and a serial I2C-bus interface. Three address pins A0, A1 and A2 are used for programming the hardware address, allowing maximum of eight devices connected to the I2C-bus without additional hardware. Address, control and data to and from the device are transferred serially via the two-line bidirectional I2C-bus.
450.00 EGPSunfounder AD/DA Converter PCF8591
450.00 EGP -
Ultrasonic Distance Sensor – HC-SR04
Distance measurement sensor is a low-cost full functionality solution for distance measurement applications.The module is based on the measurement of time flight of ultrasonic pulse, which is reflected by an object. The distance to be measured mainly depends on the speed of ultrasonic waves in space or air –which is a constant- and the flight time of the pulse.The module performs these calculations and outputs a pulse width depends on the measured distance, this pulse is easily interfaced to any microcontroller.
45.00 EGPUltrasonic Distance Sensor – HC-SR04
45.00 EGP -
-
Soil Moisture Detection Humidity Sensor
This is a simple and easy moisture sensor can be used for the detection of soil moisture, when soil water shortage, the module outputs a high level, whereas the output low level. Using the sensor produces a watering device automatically, let you don’t choose and employ persons to manage the plants in the garden.
65.00 EGPSoil Moisture Detection Humidity Sensor
65.00 EGP -
Relay 1 channel 30A 240VAC
30A relay module, normally open interface with maximum load: AC 240V/30A, DC 30V/30A
55.00 EGPRelay 1 channel 30A 240VAC
55.00 EGP -
LM2596S DC-DC Step-Down Adjustable Converter 3A
LM2596S DC-DC 4.5-40V adjustable Step-Down Power Supply Module
80.00 EGP -
GY-88 IMU 10DOF MPU6050 + HMC5883L + BMP085
This IMU 10DOF is a motion tracking module. Its design is based on the sensor MPU6050,HMC5883L and BMP085.
The sensor MPU6050 which is the world’s first integrated 6-axis Motion Tracking device, that combines a 3-axis gyroscope, 3-axis accelerometer, and a Digital Motion Processor (DMP).
The Honeywell’s HMC5883L which is a 3-axis digital compass.
The BMP085 is a high-accuracy chip to detect barometric pressure and temperature.You can uses it in your DIY or your product,for example, Quadcopter, Self-Balancing Robot and so on.
220.00 EGPGY-88 IMU 10DOF MPU6050 + HMC5883L + BMP085
220.00 EGP -
LM2577 DC – DC Converter Step-Up 2.5A
LM2577 DC – DC Converter Step-Up 2.5A
80.00 EGPLM2577 DC – DC Converter Step-Up 2.5A
80.00 EGP