Search Results for "digital"
-
GY-88 IMU 10DOF MPU6050 + HMC5883L + BMP085
This IMU 10DOF is a motion tracking module. Its design is based on the sensor MPU6050,HMC5883L and BMP085.
The sensor MPU6050 which is the world’s first integrated 6-axis Motion Tracking device, that combines a 3-axis gyroscope, 3-axis accelerometer, and a Digital Motion Processor (DMP).
The Honeywell’s HMC5883L which is a 3-axis digital compass.
The BMP085 is a high-accuracy chip to detect barometric pressure and temperature.You can uses it in your DIY or your product,for example, Quadcopter, Self-Balancing Robot and so on.
220.00 EGPGY-88 IMU 10DOF MPU6050 + HMC5883L + BMP085
220.00 EGP -
GY-271 HMC5883L Compass
GY-271 HMC5883L 3-Axis Magnetic Electronic Compass Module is designed for low-field magnetic sensing with a digital interface and it is perfect to give precise heading information.
This compact sensor fits into small projects such as UAVs and robot navigation systems.
The sensor converts any magnetic field to a differential voltage output on 3 axes.
This voltage shift is the raw digital output value, which can then be used to calculate headings or sense magnetic fields coming from different directions.
100.00 EGPGY-271 HMC5883L Compass
100.00 EGP -
GY-291 ADXL345 3-Axis Accelerometer
GY-291 ADXL345 3-Axis is a small and efficient sensor with a high resolution (13-bit) that can measure an acceleration of up to ± 16g.
The module can be accessed via the I2C or SPI protocol and can be supplied with a voltage between 3V and 5V.
60.50 EGPGY-291 ADXL345 3-Axis Accelerometer
60.50 EGP -
GY-45 MMA845 3-Axis Accelerometer Module
The MMA8452 is a smart low-power, three-axis accelerometer with 12 bits of resolution.
This accelerometer is packed with embedded functions with flexible user programmable options, configurable to two interrupt pins.
The MMA8452 has user selectable full scales of ±2g/±4g/±8g. The device can be configured to generate inertial wake-up interrupt signals allowing the MMA8452 to monitor events and remain in a low power mode during periods of inactivity.
This board breaks out the ground, power, I2C and two external interrupt pins.
100.00 EGPGY-45 MMA845 3-Axis Accelerometer Module
100.00 EGP -
DS18B20 Waterproof Temperature Sensor
This sealed digital temperature probe lets you precisely measure temperatures in wet environments with a simple 1-Wire interface.
The DS18B20 provides 9 to 12-bit (configurable) temperature readings over a 1-Wire interface, so that only one wire (and ground) needs to be connected from a central microprocessor.
55.00 EGPDS18B20 Waterproof Temperature Sensor
55.00 EGP -
MQ-7 Carbon Monoxide / Gas Sensor Module
Detects carbon monoxide in the air.
90.00 EGPMQ-7 Carbon Monoxide / Gas Sensor Module
90.00 EGP -
-
MQ-3 Alcohol, Ethanol Sensor Module
MQ-3 Gas Sensor with high sensitivity to Alcohol, Gasoline can resist, Smoke, Water vapor interference.
75.00 EGPMQ-3 Alcohol, Ethanol Sensor Module
75.00 EGP -
Photosenstive Diode Module
Photosenstive diode module is the most sensitive for environmental light intensity, generally used for detecting the ambient brightness and intensity.
In most of the cases with photosenstive resistance sensor module universal, it is difference that is the photosensitive diode module directional well and can sense the fixed direction of light source
27.50 EGPPhotosenstive Diode Module
27.50 EGP -
Infrared Obstacle Avoidance Sensor Module
IR Infrared Obstacle Avoidance Sensor Module has a pair of infrared transmitting and receiving tubes.
When the transmitted light waves are reflected back, the reflected IR waves will be received by the receiver tube.
The onboard comparator circuitry does the processing and the green indicator LED comes to life.
The module features a 3 wire interface with Vcc, GND and an OUTPUT pin on its tail.
It works fine with 3v3 to 5V levels.
Upon hindrance/reflectance, the output pin gives out a digital signal (a low level signal).
The onboard preset helps to fine tune the range of operation, effective distance range is 2cm to 80cm.
75.00 EGP -
TCRT5000 Infrared Reflective Switch Line Tracking Sensor
TCRT5000 infrared sensor emits infrared emitting diode continuously when no infrared rays emitted or reflected back is reflected back but the strength is not large enough, the phototransistor has been in the off state, and the output terminal of the module is high, indicating that the diode has been in the off state; in the object to be detected within the detection range, and the intensity of the reflected infrared rays is large enough, phototransistor saturated, and the output terminal of the module is low, the indicator LED is lit.
35.00 EGP -
Arduino Yun Orginal
Arduino Yun Orginal
1,850.00 EGP1,900.00 EGPArduino Yun Orginal
1,850.00 EGP1,900.00 EGP