Search Results for "motor"
-
4.8-6V Servo Tester CCPM Consistency Master Checker with Rev
CCPM Servo Consistency Tester
55.00 EGP -
CNC Router Single Axis 4.5A TB6600 Stepper Motor Driver
CNC Router Single Axis
600.00 EGP -
Dual Monster Moto Shield VNH2SP30 DC Motor Driver 30A
The Dual Monster Moto Shield VNH2SP30 DC Motor Driver 2x14A (Peak 30A) is essentially a ramped up version of our Ardumoto motor driver shield. For this Monster Moto Shield, It is replaced the L298 H-bridge with a pair of VNH2SP30 full-bridge motor drivers.
264.00 EGP -
3D Print Control Board Ramps v1.4 Shield for Arduino Mega
Ramps is short for reprap Arduino Mega shield, it is mainly designed for the purpose of using stepper driver board (similar to 4988 driver board). Ramps can only work when connected to mainboard Mega 2560 and DRV8825. Great compatibility with most 3Dprinter (all reprap-model such as pursa i2 and i3).
Note: This Board is only the shield, Stepper Drivers and mainboard are not included.
170.00 EGP -
Robot Wheel 65x26mm For Mini DC Gearbox Yellow Motors
Yellow Wheel For Robot 65mm Rubber
25.00 EGP -
Servo Motor Micro (180) 1.6 kg.cm Plastic Gears “SG90”
Sg90 Servo Motor
The SG90 is a small-sized, low-cost servo motor that is commonly used in small-scale projects and hobbyist applications. It is a popular choice among students, hobbyists, and DIY enthusiasts due to its affordability and ease of use. The SG90 is a type of rotary actuator that is capable of precise angular positioning and speed control.
Specifications:
- Operating Voltage: 4.8V – 6V DC
- Stall Torque: 1.8 kg-cm (4.8V); 2.2 kg-cm (6V)
- Operating Speed: 0.1 s/60° (4.8V); 0.08 s/60° (6V)
- Rotational Range: 180°
- Dimensions: 22.2 x 11.8 x 31 mm
- Weight: 9g
Usage:
The SG90 servo motor can be used in a variety of applications, including robotics, model making, remote control vehicles, and other small-scale projects. Its compact size and low cost make it an ideal choice for hobbyists and students who are just starting out with electronics and programming.The SG90 servo motor can be controlled using a microcontroller or a dedicated servo controller. Most microcontrollers have a built-in pulse-width modulation (PWM) feature that can be used to control the servo motor’s position and speed. The SG90 servo motor uses a standard three-pin connector, with the pinout being VCC, GND, and Signal.
To control the SG90 servo motor, you need to send it a pulse signal with a frequency of 50 Hz and a pulse width between 1 ms to 2 ms. The pulse width determines the position of the servo motor, with 1 ms corresponding to the minimum position and 2 ms corresponding to the maximum position. The pulse signal should be sent continuously to maintain the position of the servo motor.
The SG90 servo motor is a popular choice among hobbyists and students due to its affordability and ease of use. It is a versatile motor that can be used in a variety of applications, including robotics, model making, and remote control vehicles. With its compact size and low cost, the SG90 servo motor is an ideal choice for beginners who are just starting out with electronics and programming.
110.00 EGP -
L293D Arduino Dual Motor Shield
L293 Motor Driver Shield for DC motor/ stepper motor / servo motor
115.00 EGPL293D Arduino Dual Motor Shield
115.00 EGP -
3D Printer Ultimaker V. 1.5.7 Pcb Compatible With Ramps Arduino Mega 2560 R3
The Ultimaker 1.5.7 board is an Arduino Mega shield, geared for the DIY 3D printer market and has some great features not found on the RAMPS compatible boards such as higher input voltage ability and power connectivity options.
Controls up to 5 stepper motors and Compatible with Pololu stepper driver boards 3D Printer Ultimaker
390.00 EGP450.00 EGP3D Printer Ultimaker V. 1.5.7 Pcb Compatible With Ramps Arduino Mega 2560 R3
390.00 EGP450.00 EGP -
Cytron 20Amp 6V-30V DC Motor Driver MD20A
The MD20A enables bidirectional control of one high-power brushed DC motor from 6V to 30V. With discrete NMOS H-Bridge design, this motor driver is able to support 20Amp continuously without any heatsink.
690.00 EGPCytron 20Amp 6V-30V DC Motor Driver MD20A
690.00 EGP -
L298 Large Current Dual Dc Motor Driver Shield
Large Current Dual Dc Motor Driver using ST STMicroelectronics outstanding high-power motor driver chip dedicated L298N, direct drive DC motors, two-phase, four-phase stepper motor drive current up to 2A, motor output using eight-speed Schott group as a protective diode. The circuit line wiring reasonable mount components are used in films, laminated design can be directly plugged into the use of Aduino, reducing the technical difficulty of the user and the drive motor.
165.00 EGP -
Super Mini Drill Combination,Original Motor
Super Mini Drill Combination,Original Motor
650.00 EGPSuper Mini Drill Combination,Original Motor
650.00 EGP -
Arduino Nano CNC Shield V4 Board
3D printer stepper motor driver needs to work with Nano Arduino board.
It can be used as driver expansion board for engraving machines and 3D printers.
171.00 EGPArduino Nano CNC Shield V4 Board
171.00 EGP