Search Results for "camera"
-
Raspberry Pi Camera China V1.3
The Raspberry Pi Camera Module is a custom designed add-on for Raspberry Pi.
It attaches to Raspberry Pi by way of one of the two small sockets on the board upper surface.
This interface uses the dedicated CSI interface, which was designed especially for interfacing to cameras.
The CSI bus is capable of extremely high data rates, and it exclusively carries pixel data.
Included in the Package:
-
1x Raspberry Pi 5MP Camera
-
1x Ribbon Cable
440.00 EGPRaspberry Pi Camera China V1.3
440.00 EGP -
-
Raspberry Pi Camera Original
Raspberry Pi Camera Original
605.00 EGPRaspberry Pi Camera Original
605.00 EGP -
-
OV7670 Camera China
OV7670 image sensor, small volume, low operating voltage, providing all functions of a single chip of VGA camera and image processor. Through SCCB bus control, the sensor can output the whole frame, sampling, and various resolution 8 bits of data. The product VGA image can reach up to a maximum of 30 frames per second. Users can completely control the image quality, data format and transmission mode. All the process of image processing functions can be through the SCCB programming interface, including gamma curve, white balance, saturation and chroma .
250.00 EGPOV7670 Camera China
250.00 EGP -
OV7670 Camera With Al422 FIFO LDO 24M Crystal Oscillator STM32
The OV7670/OV7171 CAMERACHIPTM is a low voltage CMOS image sensor that provides the full functionality of a single-chip VGA camera and image processor in a small footprint package.
The OV7670/OV7171 provides full-frame,sub-sampled or windowed 8-bit images in a wide range of formats, controlled through the Serial Camera Control Bus (SCCB) interface.
This product has an image array capable of operating at up to 30 frames per second (fps) in VGA with complete user control over image quality, formatting and output data transfer.
All required image processing functions, including exposure control, gamma, white balance, color saturation,hue control and more, are also programmable through the SCCB interface.
In addition, OmniVision CAMERACHIPs use proprietary sensor technology to improve image quality by reducing or eliminating common lighting/electrical sources of image contamination, such as fixed pattern noise (FPN),smearing, blooming, etc., to produce a clean, fully stable color image.
275.00 EGP -
Plug converter from micro HDMI male to HDMI female (Rasp)
Connector Type Micro hdmi Connector Gender Male-to-Female Brand Name Generic Finish Type Matte Item Weight 0.01 Kilograms Item Package Quantity 1 Input Voltage 12 Volts Current Rating 2 Amps Power Plug No Plug 64.00 EGP -
Exclusive UT347A Leeb Hardness Tester
UT347A Leeb Hardness Tester
UT347A Leeb Hardness Tester is accurate and portable in size. It supports thermal printing and is especially suitable for field hardness testing of large equipment such as roller turboshaft, pressure vessel and turbine set. Widely used in petrochemical, electric power, automobile, shipbuilding, machinery manufacturing and other industries.13,650.00 EGPExclusive UT347A Leeb Hardness Tester
13,650.00 EGP -
Tiny210 SDK set (1G Flash) + 7″LCD resistive LCD (S70) + Standard Accessories
-
The Tiny210 CPU board is designed and developed by FriendlyElec. It is a Cortex-A8 embedded processing board that uses the Samsung S5PV210 System On Chip (SOC). Its maximum frequency is up to 1GHz. The S5PV210 integrates the PowerVR SGX540 graphic engine with hardware support for 3D and can drive video playing on screens up to 1080P.
-
The Tiny210 CPU board has 2.0 mm spacing double row pitch headers which connect the Tiny210 to a carrier board and extend most of the CPU’s pins and work with both the Tiny210 and Tiny6410 carrier boards. The standard version integrates 512M DDR2 RAM and 512M Flash (1G Flash optional) and can run Android, Linux and WinCE6. These features make it easily and widely used in MID development, Android notepads, auto electronic devices, industrial applications, GPS systems and multimedia systems.
-
-
Friendly ARM Tiny210 CPU Board
Friendly ARM Tiny210 CPU Board + SDK Board (V. 1309 and 1312) + 4.3″ Resistive LCD 1MHz Tiny210 ARM Cortex A8 Linux System.
The Tiny210 CPU board is designed and developed by FriendlyElec. It uses the Cortex embedded processing board and Samsung S5PV210 system chip (SOC).
The maximum frequency is 1 GHz. The S5PV210 integrates the Power Vr graphics engine of SGX540 hardware, which supports 3D and can drive video playback screens up to 1080P.
The Tiny210 CPU board has 2.0mm spacing double row pitch headers that allow Tiny210 to be connected to a carrier board and extend most of the CPU’s pins to work on both the Tiny210 and Tiny6410 carrier boards. The standard version integrates 512M DDR2 RAM and 512M Flash (1G Flash optional) and can run Android, Linux and WinCE6. These easily and widely used in mid-range development, Android notepad, auto electronics, industrial applications, GPS systems and multimedia systems.
6,500.00 EGPFriendly ARM Tiny210 CPU Board
6,500.00 EGP -
-
195.00 EGP
TEC1-12710 Thermoelectric Cooler (Peltier)
195.00 EGP -
Mini MP1584EN DC-DC Buck Adjustable Step Down Module 4.5V-28V Input 0.8V-20V Output
The Mini MP1584 DC-DC 3A Adjustable Buck module is ultra small adjustable 0.8V to 20V output DC to DC Buck converter uses an MP1584EN high frequency switching regulator and integrated high voltage power MOSFET.
30.00 EGP