-
UT522 Digital Earth Tester
UT520 series can perform precise 3-wire and simple 2-wire earth resistance measurement for power and electrical systems, lightning protection equipment, and ground system of all electrical equipment.
This series is UNI-T’s introductory earth resistance tester with high economic value. Its light weight design is convenient for field work.9,100.00 EGPUT522 Digital Earth Tester
9,100.00 EGP -
UT512 Insulation Resistance Tester
UT510 series testers can measure the insulation resistance of large transformers, generators, high-voltage motors, and more. UT510 series can also measure PI, DAR, and other important specifications. Measured data can then be analyzed through PC software. UT513A can produce test voltage up to 5kV.
9,400.00 EGPUT512 Insulation Resistance Tester
9,400.00 EGP -
-
9,500.00 EGP
UNI-T UT526 Multifunction Electrical Meter
9,500.00 EGP -
15000mW 450nm Laser Module Laser Cutter Adjustable Focus with TTL/PWM 15W laser module
Laser module power is relatively large, only for industrial use, to prohibit the exposure of the eye, otherwise it will cause permanent blindness, the consequences at your own risk.
9,625.00 EGP -
UNI-T UTP3305II DC Power Supply 3 Channel
UNI-T UTP3305II 3-CH Output With 2-CH 0-32V/5A And 0-5V/3A DC Power Supply
- 3-channel linear DC power supplies feature.
- High-precision four-digit voltage and current display, 10mV/1mA.
- Low ripple/noise.
- Constant voltage/current, OVP, OCP, OTP, reverse polarity protection.
- Parallel/series output function.
- Output on/off control.
- Intelligent temperature control fan.
9,750.00 EGPUNI-T UTP3305II DC Power Supply 3 Channel
9,750.00 EGP -
9,900.00 EGP
-
UNI-T UTP3303 DC Power Supply 3CH 0-32VDC 3A
UTP3300 series are three-channel linear DC power supplies of adjustable dual channel and fixed single-channel output, featuring tracking, constant voltage/current, series/parallel output, temperature controlled cooling fan, and over voltage/current protection.
10,000.00 EGPUNI-T UTP3303 DC Power Supply 3CH 0-32VDC 3A
10,000.00 EGP -
-
UNI-T UTP3303-II power supply
UNI-T UTP3303-II Linear DC Power Supply 3CH 335W 32V Adjustable Dual Channel and Fixed Single-Channel Output
The UNI-T UTP3303-II is a linear high-performance, yet affordable lab power supply that features two fully adjustable channels and one fixed channel. The adjustable channels can provide 96W of power each, over the range of 0-32V and 0-3A. The third channel provides a fixed output of 5V and 3A. Internally, the adjustable channels can be connected in series or parallel, delivering respectively a maximum voltage of 64V or a maximum current of 6A. The is an alternative power supply from the same series.
A disadvantage of UNI-T UTP3303-II is that the power supply only has a ‘coarse’ adjustment knob, making it more difficult to set the power supply precisely. Also, the 3rd channel is fixed, which means that it is not possible to set a different voltage, for example 3.3V. The power supply also has one button to switch all channels on or off simultaneously, which makes it impossible to switch individual channels on or off.
10,700.00 EGPUNI-T UTP3303-II power supply
10,700.00 EGP -
Luxonis OAK-D Lite Camera “A00483”
Combines high performance and economy, providing all the superpowers offered by RVC2 core and DepthAI API in an affordable package. Won AI and Vision Alliance’s Best camera award in 2022.
- 4 TOPS of processing power
- 13 MP central RGB camera available in auto-focus and fixed-focus variants
- BMI270 IMU, 6-axis sensor combining accelerometer and gyroscope
- USB2 / USB3 for power delivery and communication
OAK-D Lite : is the ultimate camera for robotic vision that perceives the world like a human by combining stereo depth camera and high-resolution color camera with an on-device Neural Network inferencing and Computer Vision capabilities. It uses USB-C for both power and USB3 connectivity.
Hardware Specifications
This OAK camera uses USB-C cable for communication and power. It supports both USB2 and USB3 (5Gbps / 10Gbps).
RVC2 inside
This OAK device is built on top of the RVC2. Main features:
- 4 TOPS of processing power (1.4 TOPS for AI – RVC2 NN Performance)
- Run any AI model, even custom- architecture/built ones – models need to be converted.
- Encoding: H.264, H.265, MJPEG – 4K/30FPS, 1080P/60FPS
- Computer vision: warp/dewarp, resize, crop via ImageManip node, edge detection, feature tracking. You can also run custom CV functions
- Stereo depth perception with filtering, post-processing, RGB-depth alignment, and high configurability
- Object tracking: 2D and 3D tracking with ObjectTracker node
OAK-D vs OAK-D-Lite
OAK-D-Lite is smaller, lighter and uses less power; compared to OAK-D. The main differences are:
- Mono cameras have lower resolution (640×480 instead of 1280×800)
- Initial versions of OAK-D-Lites (KickStarter batch) had no IMU. Current batches have BMI270.
- There is no power jack, as most users just used the USB-C for power delivery, which provides 900mA at 5V and is enough for most use-cases. However some functions (e.g. inference, video encoding) can lead to large current spikes, so there is a chance hosts like RPi won’t be able to provide enough power. In that case, you should use Y-adapter.
Additionally, the more technical differences are the following:
- Robotics Vision Core 2 chip-down design, instead of connecting the OAK-SoM to the baseboard (like it is done on OAK-D)
- In collaboration with ArduCam, we developed custom camera sensor connectors, which are shorter and take up less space
Fixed-focus vs Auto-focus
When ordering the OAK-D-Lite, you can select whether you want
Fixed-focus
(FF) orAuto-focus
(AF) on the color camera. You should select FF if you are mounting OAK camera to something that vibrates. You should select AF when you need things closer than ~50cm to be in focus. More information can be found at Auto-Focus vs Fixed-Focus.Dimensions and Weight
- Width: 91 mm
- Height: 28 mm
- Length: 17.5 mm
- Baseline: 75 mm
- Weight: 61 g
Stereo depth perception
This OAK camera has a baseline of 7.5cm – the distance between the left and the right stereo camera. Minimal and maximal depth perception (MinZ and Max) depends on camera FOV, resolution, and baseline – more information here.
- Ideal range: 40cm – 6m
- MinZ: ~20cm (480P, extended), ~35cm (480P)
- MaxZ: ~10 meters with a variance of 10% (depth accuracy evaluation)
Extended means that Stereo Depth node has Extended disparity mode enabled.
12,000.00 EGPLuxonis OAK-D Lite Camera “A00483”
12,000.00 EGP -
Shop By Department
- Arduino Shields
- Audio and Sound
- Batteries & Accessories
- Cables/Wires
- Classic Control Components
- Components
- Developments Boards
- Integrated Circuits
- Light Source and Display
- Mechanical Parts
- Measuring Devices
- Modules
- Motors
- Power Sources
- Programmers
- Robotics
- Sensors
- Switches
- Tools
- Terminals & Connectors
- Inverters
- Camera
- Mobile Accessories