-
- Environment Sensors
4 Pin Photo-resistor LDR Light Detection Resistance Sensor Module
- 30.00 EGP
- A versatile light-sensitive module that detects ambient light intensity using an LDR (Light Dependent Resistor), perfect for automatic lighting systems, weather stations, and smart home applications.
- Add to cart
-
- Out of Stock
- Environment Sensors
Air Quality and Dust Sensor GP2Y10
- 400.00 EGP
- The Sharp GP2Y1010AU0F sensor is an optical sensor that allows to determine the quality of air, by detecting the level of particles in the air. Its operation is based on an infrared emitting diode and a photo-transistor are positioned inside the device to detect light reflected by dust or particles in the air.
- Read more
-
-
- Out of Stock
- Environment Sensors
Atomizer Air Humidifier 1.7MHZ piezo atomization transducer
- 44.00 EGP
- 20mm 1.7 MHz Ultrasonic Atomizer Air Humidifier Piezoelectric Transduce
- Read more
-
-
- Environment Sensors
C43 Water Level Sensor & Liquid Water Droplet Depth Detection
- 20.00 EGP
- Water detection sensor is used to detect water leak, water level or rains. This is obtained by having a series of parallel wires exposed traces. The sensor traces have a weak pull-up resistor of 1 MΩ. The resistor will pull the sensor trace value high until a drop of water shorts the sensor trace to the grounded trace.
- Add to cart
-
- Out of StockSale!
- Environment Sensors
CJMCU-MICS-6814 (Air Quality Co, NH3, Nitrogen Oxide Gas Sensor)
- Original price was: 1,061.50 EGP.999.00 EGPCurrent price is: 999.00 EGP.
- The MiCS-6814 is a 3 sensor device suitable for gas leak detection and outdoor air quality monitoring. MiCS-6814 can detect many unhealthful gases, and three gases can be measured simultaneously due to its multi channels, so it can help you to monitor the concentration of gases where you expect the existence of more than one gas.
- Read more
-
-
- Out of Stock
- Environment Sensors
GY-30 BH1750FVI Digital Light Sensor Module
- 66.00 EGP
- BH1750FVI is a digital Ambient Light Sensor IC for I2 Cbus interface. This IC is the suitable for obtaining the ambient light data for adjusting LCD and Keypad backlight power of Mobile phone. It is possible to detect wide range at high resolution.
- Read more
-
-
- Out of Stock
- Environment Sensors
HR202 Humidity Sensor Module
- 38.50 EGP
- HR202 is a new kind of humidity-sensitive resistor made from organic macromolecule materials, it can be used in occasions like: hospitals, storage, workshop, textile industry, tobaccos, pharmaceutical field, meteorology, etc.
- Read more
-
-
- Environment Sensors
Infrared Flame Sensor Module 3 Pin
- 30.00 EGP
- The 3-Pin Infrared Flame Sensor Module is a compact, high-sensitivity fire detection module designed to identify flames by sensing their infrared (IR) radiation (760nm–1100nm wavelength). Ideal for fire alarms, safety systems, and DIY electronics projects, this sensor provides a digital output signal (HIGH/LOW) when a flame is detected, making it easy to integrate with Arduino, Raspberry Pi, and other microcontrollers. With its simple 3-pin interface (VCC, GND, OUT), adjustable sensitivity,…
- Add to cart
-
- Environment Sensors
LDR Light Detection Resistance Sensor Module-3 Pin Photo
- 30.00 EGP
- The LDR (Light Dependent Resistor) Sensor Module is a light-sensitive detection module that measures ambient light intensity using a photoresistor. With a 3-pin interface (VCC, GND, OUT), this module provides both digital (HIGH/LOW) and analog (variable voltage) outputs, making it ideal for light-triggered automation, security systems, and smart lighting projects. Designed for Arduino, Raspberry Pi, and other microcontrollers, this module is widely used in energy-saving devices, weather stations, and DIY electronics.
- Add to cart
-
- Out of Stock
- Environment Sensors
LDR Light Module KY018
- 22.00 EGP
- LDR Light Module KY018
- Read more
-
-
- Environment Sensors
MQ-135 Sensor Air Quality Sensor Hazardous Gas Detection Module
- 80.00 EGP
- The MQ-135 is a semiconductor gas sensor designed to detect air quality and hazardous gases including: NH₃ (Ammonia) NOx (Nitrogen Oxides) CO₂ (Carbon Dioxide) Benzene Alcohol Smoke It's widely used in air quality monitoring systems, industrial safety devices, and environmental projects.
- Add to cart
-
- Environment Sensors
MQ-2 Smoke LPG Butane Hydrogen Gas Sensor Detector Module
- 70.00 EGP
- The MQ-2 gas sensor module detects smoke, LPG, propane, butane, hydrogen, and flammable gases in the air. Ideal for fire alarms, air quality monitors, and industrial safety systems, this module provides analog & digital output for easy integration with Arduino, ESP8266, and Raspberry Pi.
- Add to cart
-
- Environment Sensors
MQ-3 Alcohol Ethanol Detection Sensor Module
- 75.00 EGP
- The MQ-3 gas sensor module specializes in detecting alcohol (ethanol) vapor and is widely used in breathalyzers, drunk-driving prevention systems, and industrial alcohol monitoring. With analog & digital outputs, it easily interfaces with Arduino, ESP32, Raspberry Pi, and other microcontrollers.
- Add to cart
-
- Out of Stock
- Environment Sensors
MQ-3 Alcohol, Ethanol, Smoke Sensor
- 27.50 EGP
- Read more
-
-
- Environment Sensors, Modules
MQ-5 LPG, Natural Gas & Town Gas Sensor Module
- 75.00 EGP
- MQ-5 GAS sensor module Sensitive material of MQ-5 gas sensor module is SnO2, which with lower conductivity in clean air. When the target combustible gas exist, The sensors conductivity is more higher along with the gas concentration rising. Please use simple electrocircuit, convert change of conductivity to correspond output signal of gas concentration. MQ-5 gas sensor module has high sensitity…
- Add to cart
-
- Environment Sensors
MQ-6 Digital & Analog LPG / Butane Gas Sensor Module
- 80.00 EGP
- The MQ-6 gas sensor module is optimized for detecting liquefied petroleum gas (LPG), propane, and butane, making it ideal for home safety, industrial monitoring, and DIY gas leak detectors. With analog and digital outputs, it works seamlessly with Arduino, ESP8266, Raspberry Pi, and other microcontrollers.
- Add to cart
-
- Environment Sensors
MQ-7 Carbon Monoxide / Gas Sensor Module
- 90.00 EGP
- The MQ-7 gas sensor module is specifically designed to detect carbon monoxide (CO) concentrations in the air, making it essential for home safety, industrial monitoring, and DIY environmental projects. With analog and digital outputs, it easily interfaces with Arduino, ESP8266, Raspberry Pi, and other microcontrollers.
- Add to cart
-
- Out of Stock
- Environment Sensors
MQ-7 Carbon Monoxide Sensor
- 27.50 EGP
- Read more
-
-
- Environment Sensors
MQ-8 (H₂) Hydrogen Gas Sensor Module
- 70.00 EGP
- The MQ-8 gas sensor module is designed for hydrogen (H₂) detection, making it essential for fuel cell applications, laboratory safety, and industrial leak monitoring. With analog and digital outputs, it integrates easily with Arduino, ESP32, Raspberry Pi, and other microcontrollers.
- Add to cart
-
- Sale!
- Environment Sensors
MS5607 Altimeter Module
- Original price was: 400.00 EGP.200.00 EGPCurrent price is: 200.00 EGP.
- The MS5607 Altimeter Module is a high-accuracy barometric pressure and temperature sensor designed for altitude measurement, weather monitoring, and flight data logging. Based on the MS5607-02BA03 chip from TE Connectivity, this module provides digital output with ultra-low power consumption, making it ideal for drones, weather stations, and outdoor navigation systems.
- Add to cart
-
- Environment Sensors
Photo Resistor Sensor – LDR 20mm
- 22.00 EGP
- The 20mm Photo Resistor (LDR – Light Dependent Resistor) features a large sensing surface that offers enhanced sensitivity to light, making it ideal for applications requiring precise detection of ambient light intensity. This sensor’s resistance varies inversely with the light exposure, providing reliable performance in both hobbyist and industrial projects.
- Add to cart
-
- Environment Sensors
Photo-Resistor Sensor (LDR 10mm)
- 14.00 EGP
- The 10mm Photo Resistor (LDR – Light Dependent Resistor) is a highly sensitive light sensor that changes its resistance based on the amount of light it detects. It is ideal for a wide range of light sensing applications, from DIY electronics to industrial automation systems.
- Add to cart
-
- Environment Sensors
Photo-Resistor Sensor (LDR 3MM)
- 3.00 EGP
- This 3mm Light Dependent Resistor (LDR) is a compact and reliable light sensor that changes its resistance based on the light intensity falling on it. It’s ideal for light-sensing applications such as automatic lighting, solar garden lights, and DIY Arduino projects.
- Add to cart
-
- Environment Sensors
Photo-Resistor Sensor (LDR 7mm)
- 8.00 EGP
- The 7mm Photo Resistor (LDR – Light Dependent Resistor) is a light-sensitive electronic component that changes its resistance based on the intensity of light falling on it. It is compact, reliable, and perfect for a wide range of light detection applications in both hobbyist and professional projects.
- Add to cart
-
- Out of Stock
- Environment Sensors
Smoke Sensor
- 27.50 EGP
- Read more
-
-
- Environment Sensors
Soil Moisture Detection Humidity Sensor
- 50.00 EGP
- Buy the Soil Moisture Detection Humidity Sensor for Arduino and microcontrollers. Perfect for smart irrigation, gardening, IoT farming, and environmental monitoring projects. Features analog & digital outputs with adjustable sensitivity.
- Add to cart
-
- Environment Sensors
TDS Sensor Module Water Quality Detection for Arduino
- 750.00 EGP
- Monitor water purity with the TDS Sensor Meter V1.0 — accurate, Arduino-compatible module for measuring total dissolved solids in any water source.
- Add to cart
-
- Out of Stock
- Environment Sensors
Water Flow Rate Sensor
- 83.00 EGP
- Water Flow Rate Sensor
- Read more
-
-
- Out of Stock
- Environment Sensors
Water Flow Sensor
- 143.00 EGP
- Water Flow Sensor
- Read more
-
-
- Environment Sensors
Water Flow Sensor YF-S401 Flowmeter
- 240.00 EGP
- The YF-S401 Water Flow Sensor is a reliable and precise sensor designed to measure the rate of water flow through a pipe. Ideal for Arduino, Raspberry Pi, and other microcontroller platforms, this sensor outputs a digital pulse signal that corresponds to the water flow rate, allowing for real-time monitoring and control in a wide range of applications.
- Add to cart
-
- Out of StockSale!
- Environment Sensors
Water Level Sensor Float Switch
- Original price was: 80.00 EGP.60.00 EGPCurrent price is: 60.00 EGP.
- A float switch is a device used to sense the level of liquid within a tank, it may actuate a pump, an indicator, an alarm, or other device.
- Read more
-
-
- Environment Sensors
Water Turbidity Sensor (Water Suspended Particles) Module
- 735.00 EGP
- The Water Turbidity Sensor Module is an optical sensor used to detect the presence and concentration of suspended particles in water by measuring its turbidity. It provides both analog and digital output signals, making it ideal for integration with Arduino, Raspberry Pi, ESP32, and other microcontrollers. This sensor works by emitting an infrared light beam through the water and measuring…
- Add to cart
-
- Sale!
- Environment Sensors
Waterproof Depth Sensor Module MS5540C
- Original price was: 1,350.00 EGP.1,100.00 EGPCurrent price is: 1,100.00 EGP.
- This is an amazing digital pressure sensor from Intersema has wide range applications.The MS5540C pressure sensor measures Absolute water or air pressure. It also measure temperature at the same time. So you can use it for measuring water depth in sea or water level in tank. It can be also be used with different fluids measurements such as oil. You…
- Add to cart












































































