-
Water Pump12Vdc Ultra-Quiet Brushless 240L/H
This is a compact size submersible water pump(none self-prime).
It’s built by a brush-less motor providing smooth and quiet operation than a non-breathless water pump.
475.00 EGPWater Pump12Vdc Ultra-Quiet Brushless 240L/H
475.00 EGP -
Mini Water Pump 3-6V DC
This is a low cost, small size Submersible Pump Motor which can be operated from a 2.5 ~ 6V power supply. It can take up to 120 liters per hour with very low current consumption of 220mA. Just connect tube pipe to the motor outlet, submerge it in water and power it. Make sure that the water level is always higher than the motor. Dry run may damage the motor due to heating and it will also produce noise.
80.00 EGPMini Water Pump 3-6V DC
80.00 EGP -
-
DC-12V 400RPM Geared Motor
25GA370 Gear Motor DC 12V 400 RPM Gear Motor Metal Gear Motor.
248.00 EGPDC-12V 400RPM Geared Motor
248.00 EGP -
3-6V DC 370 Aquarium Mini Air Pump Motor
3-6V DC 370 Aquarium Mini Air Pump Motor
160.00 EGP3-6V DC 370 Aquarium Mini Air Pump Motor
160.00 EGP -
-
Stepper Motor (NEMA 17) 17HS4401 – New
17HS4401 NEMA 17 Stepper Motor For 3D Printer
480.00 EGPStepper Motor (NEMA 17) 17HS4401 – New
480.00 EGP -
MA860H Stepper Motor Driver
MA860H Stepper Motor Driver is a high-performance stepper driver implemented with pure-sinusoidal current control technology. The MA860H Digital Stepper Motor Driver 50-110 VDC with 1.8-7.5A can be used to drive 2-phase or 4-phase motors (from “NEMA 17” or “NEMA 34” size) with less noise and heat. And it can provide better performances at high speed than most of the drivers in the markets.
It works with 36-110VDC/24-80VAC voltage and can provide max 7.2A peak current. You can set the DIP switches to get the current and micro steps you need.
1,599.00 EGP1,660.00 EGPMA860H Stepper Motor Driver
1,599.00 EGP1,660.00 EGP -
-
L293D 4-DC Motor Driver
DC Motor Driver
The drive module can directly drive four DC motors, drive the car chassis is 4WD 4 choice. Driving battery big up to 1A generally smart car motor current 100-300MA only four are sufficient to meet the control requirements.
The circuit stability. Can directly drive 4-way 3-16V DC motor, and provides a 5V output interface (input as little as 6V), You can give 5V microcontroller circuit system power supply (low ripple factor), Support 3.3V MCU ARM control, You can easily control DC motor speed and direction can be controlled two-phase stepper motor, 5-wire 4-phase stepper motor.
165.00 EGPL293D 4-DC Motor Driver
165.00 EGP -
JGA25-370 DC Gearmotor (35 RPM At 6V)
This easy-to-mount JGA25-370 DC gearmotor is great for building robots and it comes in a variety of configurations that suit even the most exigent designs.
This motor features a D-shaped output shaft.
110.00 EGPJGA25-370 DC Gearmotor (35 RPM At 6V)
110.00 EGP -
JGA25-370 DC Gearmotor (250 RPM At 12V)
JGA25-370 DC gearmotor is easy to mount, great for building robots and it comes in a variety of configurations that suit even the most exigent designs.
This motor features a D-shaped output shaft.
110.00 EGPJGA25-370 DC Gearmotor (250 RPM At 12V)
110.00 EGP
Shop By Department
- Arduino Shields
- Audio and Sound
- Batteries & Accessories
- Cables/Wires
- Classic Control Components
- Components
- Developments Boards
- Integrated Circuits
- Light Source and Display
- Mechanical Parts
- Measuring Devices
- Modules
- Motors
- Power Sources
- Programmers
- Robotics
- Sensors
- Switches
- Tools
- Terminals & Connectors
- Inverters
- Camera
- Mobile Accessories