-
- Out of Stock
- Converters
HX711 Weighing Scale Analog to Digital Converter 24 bit
- 55.00 EGP
- The Load Cell Amplifier and ADC (Analog-to-Digital Converter) Module is a small breakout board for the HX711 IC that allows you to easily read load cells to measure weight. By connecting the module to your microcontroller you will be able to read the changes in the resistance of the load cell and with some calibration you’ll be able to get very accurate weight…
- Read more
-
-
- Converters, Modules
Inverter Module DC 12V to AC 110V 175V 220V – 150W
- 430.00 EGP
- This 150W DC-AC Power Inverter Module efficiently converts 12V DC (from batteries, solar panels, or car power systems) into 110V, 175V, or 220V AC, making it ideal for powering small electronics, appliances, and tools in off-grid or mobile applications.
- Add to cart
-
- Out of Stock
- Converters
LM2577 2.5A DC-DC Step UP LED Voltmeter 3-34 to 4-35V Adjustable Boost Converter module
- 77.00 EGP
- The LM2577 2.5A DC-DC Step UP LED Voltmeter 3-34 to 4-35V Adjustable Boost Converter module is a 150 KHz fixed frequency PWM buck (step-down) DC/DC module. Requiring a minimum number of external components, these regulators are cost-effective, and simple to use.
- Read more
-
-
- Out of Stock
- Converters
LM2577 DC – DC Converter Step-Up 2.5A
- 80.00 EGP
- LM2577 DC - DC Converter Step-Up 2.5A
- Read more
-
-
- Out of Stock
- Converters
LM2596 Buck Step Down Module DC-DC 4.0-40V to 1.25-37V
- 75.00 EGP
- LM2596 DC 4V-40V To 1V-37V Adjustable Step-Down Power Converter LED Voltmeter with Voltage Meter Display High Quality
- Read more
-
-
- Converters
LM2596S DC-DC Step-Down Adjustable Converter 3A
- 65.00 EGP
- LM2596S DC-DC 4.5-40V adjustable Step-Down Power Supply Module
- Add to cart
-
- Converters
LM317 DC-DC Step Down Converter Module
- 30.00 EGP
- The LM317 DC-DC Step Down Converter Module is a versatile adjustable linear voltage regulator that converts higher DC input voltages (4V-40V) into a stable, lower output voltage (1.25V-37V) with a maximum current of 1.5A. Unlike switching buck converters, the LM317 provides low-noise, ripple-free output, making it ideal for sensitive analog circuits, audio amplifiers, and precision electronics where clean power is essential.
- Add to cart
-
- Out of Stock
- Converters
Logic Level Converter Bi-Directional
- 45.00 EGP
- I2C Logic Level Converter Bi-Directional Module 5V to 3.3V
- Read more
-
-
- Converters
MAX485 TTL To RS485 Converter Module
- 60.00 EGP
- 5V MAX485 TTL To RS485 Converter Module Board For Arduino
- Add to cart
-
- Converters
MCP4725 I2C DAC Breakout Board
- 200.00 EGP
- The MCP4725 is a high-precision, 12-bit DAC (Digital-to-Analog Converter) with I2C interface, designed for waveform generation, voltage control, and analog signal synthesis. This breakout board makes it easy to add programmable analog outputs to microcontrollers.
- Add to cart
-
- Out of Stock
- Converters, Modules
Mini DC-DC Boost Step Up Converter 3.7V to 5V / 8V/ 9V / 12V
- 60.00 EGP
- Mini DC-DC Boost Step Up Converter with an output voltage greater than the source voltage. The output current is lower than the source current. This is a high voltage step-up power supply module, which is commonly used in electronics experiments and demonstrations. The high-voltage module uses the principle of the Tesla coil. The voltage boost converter module provides 3.7V DC…
- Read more
-
-
- Out of Stock
- Converters, Modules
Mini MP1584EN DC-DC Buck Adjustable Step Down Module 4.5V-28V Input 0.8V-20V Output
- 60.00 EGP
- The Mini MP1584 DC-DC 3A Adjustable Buck module is ultra small adjustable 0.8V to 20V output DC to DC Buck converter uses an MP1584EN high frequency switching regulator and integrated high voltage power MOSFET.
- Read more
-
-
- Converters
MT3608 2A DC-DC Step Up Boost Converter Module
- 40.00 EGP
- The MT3608 Step-Up Converter Module is a compact and efficient DC-DC boost module designed to step up lower DC voltages to higher levels with high efficiency. Powered by the MT3608 IC, this module is perfect for portable electronics, DIY power supplies, and battery-powered projects.
- Add to cart
-
- Out of Stock
- Converters
OTG Type-C to USB 2.0 Converter
- 25.00 EGP
- Read more
-
-
- Converters
PL2303 USB TTL Converter Module
- 55.00 EGP
- The PL2303 USB to TTL Converter Module is a high-performance USB-to-serial adapter designed for debugging, programming, and communication between computers and microcontrollers or embedded systems. It is widely used for Arduino, Raspberry Pi, ESP8266, STM32, and other microcontroller projects.
- Add to cart
-
- Out of Stock
- Converters
RS232 to TTL Converter (Max232)
- 40.00 EGP
- The RS232 To TTL Converter Module is widely used in radio modifications, cell phone Flash, XBOX360 Flash detection, GPS, car, DVD Flash, HDD repair, set-top box upgrade.
- Read more
-
-
- Converters
Sunfounder AD/DA Converter PCF8591
- 450.00 EGP
- The PCF8591 is a single-chip, single-supply and low-power 8-bit CMOS data acquisition device with four analog inputs, one analog output and a serial I2C-bus interface. Three address pins A0, A1 and A2 are used for programming the hardware address, allowing maximum of eight devices connected to the I2C-bus without additional hardware. Address, control and data to and from the device…
- Add to cart
-
- Out of StockSale!
- Converters
USB DC-DC Converter Step Down Module 5V 3A
- Original price was: 34.00 EGP.30.00 EGPCurrent price is: 30.00 EGP.
- The input voltage of this converter module 6V to 24V, output voltage 4.8-5.2V and 3A peak current output . This module uses low ESR filter capacitor voltage as low as possible so that the ripple 30mV, fully capable and linear power comparable. The USB output converter module has short circuit protection, 5A current automatic protection.
- Read more
-
-
- Out of Stock
- Converters
USB DC-DC Converter Step Up Boost Module (0.9V-5V to 5V 600mA)
- 22.00 EGP
- Read more
-
-
- Converters
USB mini to TTL FTDI Board Module FT232RL Switchable 3.3V/5V
- 120.00 EGP
- The FT232RL USB to TTL Serial Converter Module is a high-performance USB-to-serial solution built around the reliable FTDI FT232RL chip. It allows seamless communication between your PC and microcontrollers or serial-based devices through USB. With a voltage selector switch, this module supports both 3.3V and 5V logic levels, making it compatible with a wide range of embedded systems, including Arduino…
- Add to cart
-
- Out of Stock
- Converters
USB to TTL converter UART module CH340
- 65.00 EGP
- USB to TTL converter UART module CH340G CH340 3.3V 5V switch
- Read more
-
-
- Out of Stock
- Converters
XL4015 5A DC Buck Step Down Voltage Converter
- 90.00 EGP
- This module combines the high efficiency XMLSEMI XL4015 DC-DC buck converter IC with a TI LM358 Op-Amp for stable current regulation. This module offers much higher efficiency than LM2596 based modules which means less heat and more available power for your device.
- Read more
-
-
- Out of Stock
- Converters
XL4016 DC-DC Buck Converter 8A Step Down 4-36V to 1.25-36V
- 150.00 EGP
- XL4016 PWM ADJUSTABLE 4-36V TO 1.25-36V STEP DOWN MODULE MAX 8A 200W DC-DC BUCK CONVERTER
- Read more
-
