-
1.8 TFT SPI 128*160 (Color LCD)
1.8 inch SPI TFT LCD Display Module for ST7735 128×160 51/AVR/STM32/ARM 8/16 bit
245.00 EGP1.8 TFT SPI 128*160 (Color LCD)
245.00 EGP -
-
OLED 0.96 inch 128×64 white Display Module ( Unsoldered )
Yellow Blue OLED Display Module 0.96 Inch IIC Serial 128X64 I2C SSD1306 12864 LCD Screen Board GND VCC SCL SDA for Arduino STM32
140.00 EGP -
High Bright LED Light
High Bright LED Light Lamp Chip Bead DC 30 – 36V – COLD WHITE LIGHT 30W, Very low heat generating, saving energy, environmentally.
70.00 EGPHigh Bright LED Light
70.00 EGP -
Display LCD 12864 3D Printer Controller Adapter For RAMPS 1.4
The 3D printer 128×64 Smart LCD controller for Ramps 1.4 contains a rotary encoder and a 128×64 LCD display.
330.00 EGP -
1.3″ OLED 7 Pins Display – White 128X64
OLED 128×64 dot matrix display module. The characteristics of this display module are high brightness, self-emission, high contrast ratio, slim/thin outline, wide viewing angle, wide temperature range and low power consumption.
165.00 EGP1.3″ OLED 7 Pins Display – White 128X64
165.00 EGP -
HW-069 4 Digits 7 Segment Display Module with 0.36Inch Time Clock TM1637 Driver
The module is a 12-pin display module with a 4-point common digital tube (0.36 inch) with a clock point.The driver chip is TM1637.
It only needs 2 signal lines to enable the MCU to control the 4-bit 8-segment digital tube
45.00 EGP -
LCD 4*20 and Controller for 3D Printer
LCD 4*20 and Controller The intelligent controller includes an SD card reader, rotary encoders, and a 20-character x 4 line LCD display. You can easily connect it to your RAMPS 1.4 board using the “smart adapter” included
395.00 EGPLCD 4*20 and Controller for 3D Printer
395.00 EGP -
15000mW 450nm Laser Module Laser Cutter Adjustable Focus with TTL/PWM 15W laser module
Laser module power is relatively large, only for industrial use, to prohibit the exposure of the eye, otherwise it will cause permanent blindness, the consequences at your own risk.
9,625.00 EGP -
12v high power laser module 5.5W 450nm laser
12v high power laser module 5.5W 450nm laser
7,150.00 EGP12v high power laser module 5.5W 450nm laser
7,150.00 EGP -
12v high power laser module 2W 450nm laser without glasses
12v high power laser module 2W 450nm laser without glasses
3,750.00 EGP
Shop By Department
- Arduino Shields
- Audio and Sound
- Batteries & Accessories
- Cables/Wires
- Classic Control Components
- Components
- Developments Boards
- Integrated Circuits
- Light Source and Display
- Mechanical Parts
- Measuring Devices
- Modules
- Motors
- Power Sources
- Programmers
- Robotics
- Sensors
- Switches
- Tools
- Terminals & Connectors
- Inverters
- Camera
- Mobile Accessories