Search Results for "power supply"
-
Friendly Arm Tiny 6410
Smart210 is a highly integrated, high-performance Cortex-A8 core board designed, manufactured and distributed by the friendly arm of Guangzhou. Both use Samsung S5PV210 as the main processor, which can run at up to 1GHz. The S5PV210 integrates PowerVR SGX540 high-performance graphics engine, supports smooth 3D graphics operation, and can play 1080P large-size HD videos.
The Smart210 core board uses 2.0mm pitch double-row pins (P1, P2, P3, P4) with a size of 74x55mm, which leads to a total of 208Pin pins. Among them, the P1 and P2 pin headers are standard welding, which already contains most of the commonly used functions; P3 and P4 air welding, which is convenient for users to expand and use. The Smart210 board integrates a network card and a sound card chip, which is very suitable for enterprise users to carry out rapid product design or project development. The core board comes standard with 512M memory and 512M high-performance SLC flash memory (another 1GB optional).
Smart210SDK is a reference design baseboard for Smart210. It comes with a variety of common standard interfaces, such as HDMI output, USB Host, SD card, DB9 serial port, RJ-45 Ethernet port, audio input and output ports, etc., and some on-board resources. Test devices such as EEPROM, buzzer, buttons, GPIO port, SDIO port, etc., so that users can comprehensively evaluate and use the core board. In terms of layout, we try to consider that LCD modules of common sizes can be fixed on the backplane, such as 3.5 “, 4.3”, 5 “, 7” LCD, etc., so that users will not stir various wires together during use. , And increase the portability of the development kit.
We also fully took advantage of the 210 support for SD card booting, and carefully developed a powerful Superboot-210, which does not require a computer connection, as long as the system ROM is copied to the SD card (supporting high-speed large-capacity cards up to 32G) You can quickly and easily install a variety of embedded systems (WindowsCE6 / Linux / Android / Ubuntu / uCos2 or bare metal programs, etc.); this is very suitable for enterprise users for mass production and field upgrades to update the system !
Keeping pace with the development of the times, we have also developed a new USB download tool MiniTools using cross-platform Qt4. With Superboot, users can brush the board like a mobile phone. It uses the world’s universal Fastboot low-level driver, so you can take almost All Windows systems (including 32 / bit-bit machines), and can support various distributions of Linux, such as Fedora, Ubuntu and other systems.
With MiniTools, no serial connection is required, as long as the USB, users can select single or multiple system image files, download and flash in one go, and truly realize one-click flashing; In addition, MiniTools also supports download to memory operation and one-click quick start function Therefore, MiniTools is also very suitable for developers to quickly debug and develop !3,300.00 EGPFriendly Arm Tiny 6410
3,300.00 EGP -
18650 Battery Holder 3 Cell
3 Way 18650 Battery Holder
27.00 EGP18650 Battery Holder 3 Cell
27.00 EGP -
TLP250 DIP Integrated Circuit
TLP250 DIP Integrated Circuit
The TLP250 is a photocoupler IC (integrated circuit) in a DIP (dual inline package) format. It is commonly used for isolated control and signal transmission in various electronic circuits, such as power supplies, motor control circuits, and industrial equipment.
Here are the full specifications of the TLP250 DIP IC:
- Isolation voltage: 5000 Vrms (minimum)
- Peak output current: ±2.5 A (maximum)
- Supply voltage: 10 V to 30 V
- Input current: 10 mA (maximum)
- Input voltage: 0.5 V to 1.5 V
- Switching speed: 0.5 µs (maximum)
- Operating temperature: -40°C to +100°C
- Package type: DIP-8
- Pin configuration:
- Pin 1: Anode of LED (positive)
- Pin 2: Cathode of LED (negative)
- Pin 3: Emitter of phototransistor
- Pin 4: Collector of phototransistor
- Pin 5: Not connected (NC)
- Pin 6: Vcc (positive supply voltage)
- Pin 7: Vo (output)
- Pin 8: GND (ground)
55.00 EGPTLP250 DIP Integrated Circuit
55.00 EGP -
7805 Positive Voltage Regulator 5V
The 7805 is a fixed voltage linear regulator that outputs 5V at up to 1A current with an input voltage range of 7 – 35V.
7.00 EGP7805 Positive Voltage Regulator 5V
7.00 EGP -
-
Xbee 5V/3.3V Adapter Board
This low cost XBee 3.3-5V Adapter Board comes in partially assembled kit form and provides a cost-effective solution for interfacing your microcontroller to any XBee or XBee Pro module (see Associated Modules below). A voltage regulator and 74LVC244A buffer is included onboard for safe interfacing to a 5 V supply, allowing for easy compatibility with any Parallax microcontroller.
190.00 EGP220.00 EGPXbee 5V/3.3V Adapter Board
190.00 EGP220.00 EGP -
Uart Wifi Module With Ceramic Antenna Hlk-Rm04
Uart Wifi Module With Ceramic Antenna Hlk-Rm04
300.00 EGP -
Wireless Rf Transceiver Modules HR-1022
Wireless Rf Transceiver Modules
HR-1022 Wireless RF Transceiver Module with the low-power wireless transceiver data module is used as the wireless data transceiver in long range
440.00 EGPWireless Rf Transceiver Modules HR-1022
440.00 EGP -
SIM900-TE-C GSM GPRS Module
SIM900-TE-C GSM GPRS Module
495.00 EGPSIM900-TE-C GSM GPRS Module
495.00 EGP -
HC-05 Bluetooth Module
Very simple Bluetooth module to connect it with your microcontroller, Arduino, Raspberry Pi, or any MCU board using the TTL UART interface
This serial bluetooth module can work as either master or slave. This module also includes the base board, not only the core board, most functions are pre-set, so only the serial port communication is available but it’s more easy to use. It can be used also with arduino or Microcontroller.
250.00 EGPHC-05 Bluetooth Module
250.00 EGP -
12V 24-Key LED Strip IR Remote Controller with Controller Box
12V 24-Key LED Strip IR Remote Controller with Controller Box for 3528 5050 SMD RGB LED Strip Lights
24.00 EGP -
Sunfounder AD/DA Converter PCF8591
The PCF8591 is a single-chip, single-supply and low-power 8-bit CMOS data acquisition device with four analog inputs, one analog output and a serial I2C-bus interface. Three address pins A0, A1 and A2 are used for programming the hardware address, allowing maximum of eight devices connected to the I2C-bus without additional hardware. Address, control and data to and from the device are transferred serially via the two-line bidirectional I2C-bus.
450.00 EGPSunfounder AD/DA Converter PCF8591
450.00 EGP